How to tighten bumper gap. How to adjust front bumper. Slight notching to really get the bumper fitting tightly and nicely up against the grill surround
Пікірлер: 40
@jaredadams51942 жыл бұрын
I just did mine yesterday, I left the brackets attached and adjusted the 4 holes on each mount instead. The gap looks just like yours too. 👌
@Patman03sprcrw2 жыл бұрын
Awesome. Good work!
@brandonmcguffin9716 Жыл бұрын
Thanks for this.
@Patman03sprcrw Жыл бұрын
No problem! Good luck with yours
@2l32 жыл бұрын
Great job!
@Patman03sprcrw2 жыл бұрын
Thanks!
@LuisRodriguez-ve5ok2 жыл бұрын
Thanks buddy!
@Patman03sprcrw2 жыл бұрын
you got it!
@jordanjohnson57842 жыл бұрын
Beautiful truck. I know that is a Harley bumper and valance (I believe...) But... What grill is that?
@Patman03sprcrw2 жыл бұрын
Thanks! Grill is 2001-2004 SVT Lightning
@wraith3951 Жыл бұрын
I’m curious if the adjustment u needed could have been accomplished if u had swapped the left and right brackets instead of notching them? Curious to know but I have that same gap on my Lightning so I will investigate and let y’all know
@Patman03sprcrw Жыл бұрын
Interesting idea. Curious what you come up with
@romansoldier16432 жыл бұрын
Hey man, just a quick question. Do you have rear discs? And if so were they stock or did you do a conversion? Because I currently have an 8.8 with drums and wanted to have discs
@Patman03sprcrw2 жыл бұрын
Yes I have disks. 2000+ should have rear discs from the factory
@romansoldier16432 жыл бұрын
@@Patman03sprcrw I guess mine wasn’t lucky enough to have those 🙃 I have a 2000 but it also has the 4.2. I’m sure it wouldn’t be too tasking just to get a rear end from a disc truck and swap them out
@Patman03sprcrw2 жыл бұрын
@@romansoldier1643 might have been 2001. I could have sworn it was 1997-1999 that has 12mm studs and drums, and 2000-2004 that had 14mm studs and disks
@Patman03sprcrw2 жыл бұрын
@@romansoldier1643 but yea swapping axles isn't bad, just make sure the donor is a 8.8 and same ratio, you might even get lucky and get an upgrade to a LSD at the same time
@ottobauner98282 жыл бұрын
@@Patman03sprcrw your close to right. 99 was the last year off 12mm studs and 00 the first for 14mm. 99 was the 1st year of the disc brake rear on 8.8 . You can find the disc brake rear option on 4.6 trucks 99 and 00 with a axle code of I9. All F150 after 00.5 came with disc brakes.
@unit1immortal2992 жыл бұрын
What year coyote engine did swap into that truck
@Patman03sprcrw2 жыл бұрын
2015 Gen2 F150 engine
@unit1immortal2992 жыл бұрын
@@Patman03sprcrw thanks
@Paul-IE-Repairs2 жыл бұрын
5 min compressor monolog for the win
@Patman03sprcrw2 жыл бұрын
5 year old Craftsman compressor. Somehow still trucking along
@Patman03sprcrw2 жыл бұрын
*15 years old
@jabrito82252 жыл бұрын
Nice looking truck quick question were did you get the lower valace for that bumper
@Patman03sprcrw2 жыл бұрын
Valence came off of a 2003 Harley Davidson edition F150. One year only, very rare
@armandobello34582 жыл бұрын
Could you tell me where I can find the bumper valance you have. It looks like it bolts to the original steel bumper. Any information as to where I can find it or link or web site is appreciated.
@Patman03sprcrw2 жыл бұрын
2003 Harley Davidson F150 valence. Very hard to find
@Eastsidee817 Жыл бұрын
Where did you get that front valance?
@Patman03sprcrw Жыл бұрын
that is only from a 2003 Harley Davidson F150
@danielromero25182 жыл бұрын
Can I put a front bumper on my 2001 f150 if yea where can I find them
@Patman03sprcrw2 жыл бұрын
There are replica valence for sale online. Originals are really hard to find
@johnisasexyname2 жыл бұрын
Where do i find this bumper or any sport bumper
@Patman03sprcrw2 жыл бұрын
This one is a 2003 F150 Harley Davidson edition valence. Good luck finding them, they are super rare
@johnisasexyname2 жыл бұрын
@@Patman03sprcrw well shit
@Patman03sprcrw2 жыл бұрын
@@johnisasexyname slightly more 2003 STX valence And then slightly more of the 00-02 Harley valence
@D4x4Bronc2 жыл бұрын
OEM body lines nothing better.
@Patman03sprcrw2 жыл бұрын
Little bit tighter than OEM gap, but I agree it's hard to beat the original lines
@tomasrocha60212 жыл бұрын
i have a 5.4 looking one same color
@Patman03sprcrw2 жыл бұрын
Good luck. I looked for many many years. I did recently find a clone valence online. No idea of fitment or quality, but that might be another option