Forgot to mention that the inner & outer tie rods were replaced👍🏽🙌🏽
Пікірлер: 86
@Venobusa1340cc9 ай бұрын
Ford performance shocks & struts! ROUSH SPRINGS ONLY! 5:46
@mikehughes80239 ай бұрын
S197s are still the best looking Stangz!🔥
@Venobusa1340cc9 ай бұрын
100%😤🙌🏽
@veyrnotvods55426 ай бұрын
Eleanor generation, Fox Body four eyes.
@scdub7 ай бұрын
Beautiful! I’m a proud father of a 2013 Boss 302 LS. The S197 is the best looking modern Mustang to me, and yours is extremely nice.
@Venobusa1340cc7 ай бұрын
ULTRA RARE BREED YOU GOT!!!!🔥🤘🏽
@marcasswellbmd69229 ай бұрын
I love all the Mustangs from 1964 too now.. I am loving my 2017 too.. I think they are all bad ass and love the Mod's people do to these cars..
@ameyyyyy.w9 ай бұрын
Sick build buddy!!!
@Venobusa1340cc9 ай бұрын
Thank you!🙌🏽
@Xxiv474 ай бұрын
I’m not a huge Mustang guy but lord have mercy this is a beautiful s197 that wheel and fitment is 👌👌
@Venobusa1340cc4 ай бұрын
Thanks man, took a lot of planning to get what i pictured in my head to this point!🙏🏽🙌🏽
@Xxiv474 ай бұрын
@@Venobusa1340cc same here man I’m doing a single 80mm turbo build on my 15 Chevy SS I just got some new forgestar Cf5 wheels once she’s out the shop I’ll slap them on as well!
@Venobusa1340cc4 ай бұрын
@@Xxiv47 LETS GO! Those are mean mfs!🔥
@twilightmedia85759 ай бұрын
looks good, i love that ford emblem
@Venobusa1340cc9 ай бұрын
I appreciate it!🤙🏽🙏🏽
@vegeta3124 күн бұрын
Front windshield tint would go crazy
@Bloodwolvz6 ай бұрын
I love my ‘12 GT/CS 6 speed. planning a 900whp build that should get started next year. you’ve got a very nice setup
@Venobusa1340cc6 ай бұрын
Hell yeah man! You won’t regret it!🙌🏽
@Bloodwolvz6 ай бұрын
@@Venobusa1340cc Rah 🤙
@Bloodwolvz6 ай бұрын
hey question. what touchscreen is that? i’m looking to upgrade but don’t have a good option that I like at the moment
@Venobusa1340cc6 ай бұрын
@@Bloodwolvz i got it from “pheonix kits” in the 400$ range👍🏽
@Bloodwolvz6 ай бұрын
@@Venobusa1340cc not bad. i’ll check them out. thanks bro 🤙
@alec42842 ай бұрын
Cmon big dawg get some 6 piston brembos on the front and itd look soooo clean!!
@Venobusa1340cc2 ай бұрын
I asked my shop if i should get a wilwood big brake kit and they talked me out of it, it was unnecessary for my driving style 🤝🏽
@jesusm21599 ай бұрын
Steeda wheel hop support kit 👌
@thegoat6267 ай бұрын
Absolutely gorgeous bro. I got a 2011 5.0 and real excited to build it. What gen heads are on the 3rd gen block? And are they ported or what lol
@Venobusa1340cc7 ай бұрын
I appreciate it! CONGRATS!!! Gen 1 heads & timing, not ported👍🏽
@jesusm21599 ай бұрын
Quad exhaust would look nice
@veyrnotvods55426 ай бұрын
I still regret not buying a 67...God, that thing was hot.
@jesusm21599 ай бұрын
Oil cooler and transmission cooler future?
@mudbone74018 ай бұрын
holy fk i want my s197 exactly like this
@Venobusa1340cc8 ай бұрын
I appreciate it man!🙌🏽
@robb150339 ай бұрын
Love to ya!
@lalo_ugalde26699 ай бұрын
Love it
@Venobusa1340cc9 ай бұрын
Much appreciated!🤙🏽🙏🏽
@bille48899 ай бұрын
Looks sick 👍
@Venobusa1340cc9 ай бұрын
Thank you!🙏🏽🤘🏽
@bille48899 ай бұрын
@@Venobusa1340cc no issue with rear axle tubes twisting? I’ve heard they can w bigger power but haven’t seen it. Heard you replaced the axles themselves but the tubes apparently can twist?
@Venobusa1340cc9 ай бұрын
@@bille4889 Was a thought but my shop didn’t think it was necessary, especially since i only do roll racing 👍🏽
@bille48899 ай бұрын
@@Venobusa1340cc be careful out there and good luck!
@jesusm21599 ай бұрын
Just a race 🏁 car or daily driver?
@edeniv9 ай бұрын
you make me want to trade in my gen 3 for an s197, it’s just the chassis and irs difference holding me back
@Venobusa1340cc9 ай бұрын
The solid axel is SOOOOO much better for putting the power down 🙌🏽🔥
@edeniv9 ай бұрын
@@Venobusa1340cc could i get a full list of everything suspension wise you've done? gonna go check out a 2012 gt500 tomorrow
@Venobusa1340cc9 ай бұрын
@@edeniv Roush springs, ford performance shocks & struts, front & rear adjustable sway bars, pan hard bar & brace, upper & lower control arms, new front lower control arms, strut tower brace & rear shock tower brace
@Venobusa1340cc9 ай бұрын
@@edeniv The roll cage adds some rigidity to the suspension as well
@AirRheez7 ай бұрын
ight man take my like and subscribe already damn.
@Venobusa1340cc7 ай бұрын
I appreciate it lol🤣🫶🏽
@jesusm21599 ай бұрын
10 speed transmission would be nice
@gorgik5 ай бұрын
Nice build! What hood do you have?
@Venobusa1340cc5 ай бұрын
2013 - 2014 Ford Mustang Terminator Style Carbon Fiber Hood (that’s the name of it)🙌🏽
@keule47Ай бұрын
🚀🚀
@Thevlones4 ай бұрын
Bro where did you get the tablet for the car ????? I’m tryna get one that actually works
@Venobusa1340cc4 ай бұрын
“pheonix kits” was about 400ish$
@Thevlones4 ай бұрын
@@Venobusa1340cc thanks man
@michaelmiller98709 ай бұрын
NICE 👍👍🇺🇸
@Venobusa1340cc9 ай бұрын
Thank you!🙌🏽🤙🏽
@user-xb1yu5qp5b5 ай бұрын
What happened to the “this vs that” video?
@Venobusa1340cc5 ай бұрын
I’m still waiting unfortunately, i don’t want to bother his personal number but the prod. said he doesn’t have a matchup as of yet. I’ll reach back out to him soon!
@jesusm21599 ай бұрын
Does it ride smooth or bumpy?
@Venobusa1340cc9 ай бұрын
The great thing about prochargers is that the power goes up with the rpms, so it doesn’t shove in boost at 3krpms or cruising speed, you gotta get in gear & high rpms for it to start bucking. So it’s smooth & drives like stock till you get wild🤘🏽🙌🏽🔥🔥🔥🔥
@@Venobusa1340cc im by texas motor speed way. was looking to buy a stang from co part and build it out. id like some tips and pointers. yours is an amazing build
@Venobusa1340cc3 ай бұрын
@@mfvigilante Hit up “true street motorsports” they’ll be able to direct you🤘🏽
@mfvigilante3 ай бұрын
@@Venobusa1340cc on what platform
@Venobusa1340cc3 ай бұрын
@@mfvigilante Give them a call, their number is on google located in mckinney tx👍🏽
@unlimitedcarpetcleaningtat72906 ай бұрын
What year is that
@Venobusa1340cc6 ай бұрын
2013
@marcustate16293 ай бұрын
@@Venobusa1340cc where can I find a 07 s197 front end like that
@prodfriscov9 ай бұрын
gyat
@danielshepard73579 ай бұрын
Car included what did it cost??
@Venobusa1340cc9 ай бұрын
89.8k (underestimated by a few Ks & not including building my last stage 2 mt82 & what i did going fbo n/a beforehand)
@danielshepard73579 ай бұрын
You’re the man and thank you for your quick response! I absolutely love what you did!!