1st Gen Cummins gets 4x4 Swapped
Рет қаралды 10,306
Жыл бұрынThe Nazty 1 Gen finally got the 4x4 front end finished up!
1st gen Cummins:
1993
90k miles
Spotless rust free
Factory 5 speed Getrag 360 transmission
4x4 swapped using a w250 donor chassis
Steering: Far From Stock Cross Over Steering
Shocks: Bilstein 5100 series
@mattywho8485 Жыл бұрын
As an old duffer, I can't believe you did this in your driveway, in the winter. I've got a few 2nd gens, but would love to add a nice gen 1 to the garage. I wouldn't hesitate to do this job, but I think I would make room in the shop first ! Great vid.
@NaztyNate Жыл бұрын
Oh hell yes I did!! There's no stopping when the excitement to build something like this is all I think about! Lol. Thanks for the kind words 🤟 a 1gen in a big shop/garage is a dream of mine like you said
@zachabner608 Жыл бұрын
Looks amazing brotha. Nothing but quality work from you!!
@NaztyNate Жыл бұрын
Thank you brother 😎I'm ready to get it sitting next to yours! It's gona be fun to see them together.
@keeprtuned Жыл бұрын
As Nate would say… NASTY! Good work man it’s looking mint!!
@NaztyNate Жыл бұрын
That's right! Thanks man!
@rc_1996 Жыл бұрын
Can’t wait to see this thing in person.
@NaztyNate Жыл бұрын
Oh buddy you need to!
@1997fourtrax Жыл бұрын
Yessir been waiting on this upload!
@NaztyNate Жыл бұрын
I appreciate you! This one took some time to film!
@ronaldduwaynebrown8071 Жыл бұрын
It's looking sweet
@FirstGendodgegarage Жыл бұрын
was hoping youd show how you got the cross member in
@NaztyNate Жыл бұрын
I know I didn't film that part, sorry! Used a couple ratchet straps and a BFH for some persuasion !
@FirstGendodgegarage Жыл бұрын
@@NaztyNate how did you hold the engine up while you did all that
@NaztyNate Жыл бұрын
@@FirstGendodgegarage with an engine hoist on the front lift point on the head
@FirstGendodgegarage Жыл бұрын
@@NaztyNate mint ok thx
@GMCJay_lly Жыл бұрын
Commenting for support
@NaztyNate Жыл бұрын
Thanks man!
@armandocordova5949 Жыл бұрын
I just tackled the same project on my 1990 dodge d250. Took a whole weekend. I did the same as you i put crossover steering.
@NaztyNate Жыл бұрын
That's the way to do it! What trans and tcase you running?
@chargermaster586 Жыл бұрын
snowstorm coming this weekend, I wouldn't want to see the 1st gen ruined by salt, but you have 4WD for Snow.
@GageGonzalez954 11 ай бұрын
Man this is a dream truck 😮💨
@NaztyNate 11 ай бұрын
It was a dream come true for me! Was definitely a fun truck
@GageGonzalez954 11 ай бұрын
@@NaztyNate I’m trying to get one but man they want some outrageous prices for them
@OvensGarage Жыл бұрын
Nice work that's a big job. Did you end up putting those "core support" looking brackets in above the front spring hangers. From the factory they only had one rivet in them, good to use both holes and two bolts instead. Some of those brackets had a tendency to loosen up the rivets over time. You going to put factory w350 blocks in the rear?
@NaztyNate Жыл бұрын
Yes I did, I'll show them in the next vid! We made a set of gusseted brackets since I didn't save the factory ones and these are BEEFY! And yes definitely going to do blocks!
@OvensGarage Жыл бұрын
@Nazty Nate nice work keep it up. Love seeing the progress....and story of my life I work in the cold too all the time 🤣
@NaztyNate Жыл бұрын
@@OvensGarage man it ain't fun! LOL I appreciate it man! Hopefully a bigger work space is in the future!
@derekholt8511 Жыл бұрын
I wanna say its looking good…. But shes fuckin tooted😭😂 cant wait to see the final results brotha🤟
@NaztyNate Жыл бұрын
She's tooted alright! LOLLL
@eddiea2913 Жыл бұрын
Great Content bro, but GET SOME HEAVY DUTY JACK STANDS OR PUT SOME WHEELS UNDER IT.
@Mr2eyedjack Жыл бұрын
Hey on the white dodge there's a look to be an air coupler chuck, what's tha for?
@tylercain7722 10 ай бұрын
Quick question do you still have the upper control arms? I need a set for my 90’ d-350.
@cadeamber2356 2 ай бұрын
How many days in total did this take you from taking everything apart to putting it back together? Also where did you buy the brake lines? I’m 4wd and manual swapping my dually this summer. I already have most of the parts
@davidsferrazzo 7 ай бұрын
Where can I buy the leaf spring hangers? Or do I need to find a parts truck and cut them off?
@supercuber73 5 ай бұрын
Absolutely the best video on this swap on the internet. I bought a whole 4x4 frame for my swap and planned to swap the whole thing but my truck is in slightly better shape so now im leaning towards swapping the member and perches. Any chance you remember exactly what size bolts you ran?
@NaztyNate 5 ай бұрын
Either 1/2 or 9/16 I can't remember, there is a size that fits in the rivet holes perfectly
@supercuber73 5 ай бұрын
@NaztyNate appreciate it man. Also a quick question. You drew the template to cut the hole for the lever in another video. But how did you line it up before drawing it?
@turbogrin Жыл бұрын
Looking real nice ! Was this a kit? Those u bolts might need some anti sieze and cut off the remaining length of threads! Keep us all informed on your LS swap on the BMW !
@NaztyNate Жыл бұрын
I was thinking that about the u bolts! It was not a kit, I got all the pieces from a parts truck or ordered new. And I'll make videos of the LS swap for sure!
@turbogrin Жыл бұрын
@@NaztyNate Yes I watched your other video and it explained how you got the parts! The Getrag are great transmission using synthetic motor oil and over filling it by one quart! That stearing plate that you took off is unobtanium and they go for good money on ebay by the way! you might want to change over to a Borgenson steering as that is what I have done on several First gen dodges ! Once agin that is One Nice looking first gen!
@wwkii1 Жыл бұрын
Nice job. I just did the exact same swap. Luckily I had 2 doner trucks to pull parts from. It is my sons truck and it was a 91.5 2wd dually turned into a 4 Ed single wheel. I’m actually pretty impressed that you didn’t pull the engine to swap the cross member and to to all the hole locations.the crossmember must have been a bitch to get back in with the engine in place. Nice job. His truck is coming a long really well
@wwkii1 Жыл бұрын
Oh yea plus his truck since it was a 2wd automatic I had to cut the floor pan out and weld in a 4wd manual cab floor pan. That’s a real intimidating undertaking cutting a perfectly good floor out. Lol. This truck will end up with a factory getrag.
@NaztyNate Жыл бұрын
That's awesome man!! Yeah it was a nightmare getting the cross member in for sure. This truck will stay with a getrag also!
@wwkii1 Жыл бұрын
The nice thing about the bolted in crossmember now is if you ever need to do the oil pan gasket. You should be able to get it much easier. Also I used all grade 8 bolts and hood pinch nuts for everything. I’m still going to double check them pretty often to make sur the don’t work loose. I sure don’t want my kids truck with loose front end. By the way that is one clean 1st gen you have. I actually have 3 of them but one is a 86 gasser. I’m working on getting a 12 valve to put in it. They are all 4wds and all flatbeds.
@FirstGendodgegarage Жыл бұрын
what are you running for transmission and transfer case
@NaztyNate Жыл бұрын
Right now still 2wd trans. I will be swapping to 4x4 getrag and factory 205 tcase.
@Anthony12valve440RB Жыл бұрын
Good job. If this me I would’ve bit the bullet and put coil over setup on it since you’re already going through all that work. Lets face it leaf springs are way to stiff in the front. But thats just me.
@NaztyNate Жыл бұрын
I REALLYYYY wanted to but it was just going to cost too much for the set up I wanted. So, I thought factory would be best. Also, these are "soft ride" leafs and so far they don't seem too bad!
@Dschares Жыл бұрын
Want to do something like this with my 2nd gen can it be done without a full frame swap don't want to swap everything over would much rather do some fab work? Need pics of the frames and differences in the frames
@NaztyNate Жыл бұрын
2nd gen 2wd and 4wd frames are different. 1st gen 2wd and 4wd are the same.
@Dschares Жыл бұрын
@@NaztyNate I know there were some differences but figured I could fab it together, buy great job on your conversion got a lil bit of a Carolina squat at the moment but 3 inch block should change that pretty quick
@claytonotto9019 Жыл бұрын
Do u need two 16 dodge dually wheels I have two u can have if need
@DuDieselDude Жыл бұрын
put an om606 in the m3 please! can make 600hp on stock block
@NaztyNate Жыл бұрын
I already have an lq4 and ls3 top end for it! My goal is 450-500 NA
@DuDieselDude Жыл бұрын
@@NaztyNate but diesel
@NaztyNate Жыл бұрын
@@DuDieselDude Haha that would be wild!
@bigpapi1184 Жыл бұрын
Those m606 are beast I've been wanting to do a build like that best engine
@DuDieselDude Жыл бұрын
@@bigpapi1184 ive seen people do some crazy shi w it. now we just gotta concince nate
@adrianserrato1781 Жыл бұрын
How much was the swap out the door and what was the hardest part of the project ?
@NaztyNate Жыл бұрын
Good question! I'm not sure, I'll add it up and make a video!
@wts860 Жыл бұрын
Where did you get the leaf springs and hangers
@NaztyNate Жыл бұрын
I bought a w250 chassis so I got all the hangers/brackets from that frame.
@Allornothin12v 8 ай бұрын
do you remember the bolts u used, or where u got them, thanks
@NaztyNate 8 ай бұрын
Yeah, 1/2 inch grade 8 bolts
@Barkley7801 Жыл бұрын
How did the transmission crossmember go in?
@NaztyNate Жыл бұрын
Trans cross member bolts to the bottom of the frame, had to drill new holes for it.
@Barkley7801 Жыл бұрын
@@NaztyNate I have a 92 d250 I’m thinking about doing the same thing. Would I get the same front axle as you?
@MrCstone1 Жыл бұрын
What about a template for where the holes get drilled under the door for the shackles?
@NaztyNate Жыл бұрын
Those holes were already there on my truck from the factory, they literally just bolted in!
@MrCstone1 Жыл бұрын
@@NaztyNate no freaking way lol
@NaztyNate Жыл бұрын
@@MrCstone1 yup!! I couldn't believe it
@MrCstone1 Жыл бұрын
@@NaztyNate do you have an email
@MrCstone1 Жыл бұрын
@@NaztyNate do you have an email?
@MrRmga420 Жыл бұрын
Well it WAS a nice truck.. oh well.
@NaztyNate Жыл бұрын
It's ruined now!
@Allornothin12v Жыл бұрын
Does it have to be a cummins frame ?? and does the year matter ?
@NaztyNate Жыл бұрын
No sir, I think all 1gen frames are the same. The early ones might be different but 89-93 are definitely all the same
@whistlinlbz Жыл бұрын
@@NaztyNate so the engine crossmember is the same too?
@NaztyNate Жыл бұрын
@@whistlinlbz no, that needs to be changed. That's the worst part of it all.
@Allornothin12v Жыл бұрын
@@NaztyNate I can't seem to find a 4x4 cummins engine crossmember think one off a 4x4 gas truck would work?
@wwkii1 Жыл бұрын
Yes a 4wd gasser crossmember will work. That’s exactly what I used on my swap.
@johnvineyard67 4 ай бұрын
8.05 all these kinds of vids skip installing the front ,, rear mounts ,, drilling,, all the hard stuff ,,,,???
@sebastianflores-qy9jd 5 ай бұрын
Sell me your 2wd parts plz 😢
@NaztyNate 5 ай бұрын
Unfortunately, those are long gone
JH Diesel and 4X4
Рет қаралды 83 М.
GREG_ALBERALLA
Рет қаралды 64 М.
JH Diesel and 4X4
Рет қаралды 53 М.
POWERNATION 2
Рет қаралды 12 МЛН