"pretty much anything you buy is defaulted to a 1Gb connection" Yeah, tell that to smart tv manufacturers and their prehistoric 100Mb ethernet ports....

The biggest problem with 2.5Gb is, managed switches are either non existent, or as expensive as 10Gb. I'm looking to upgrade my network and this is the biggest issue for me, as I have some VLANS, especially as I'll need 2 switches as I have a cable going from one side of my house to the other, and vlans are involved. Agree with what you said though. Most people 10Gb is overkill, yes it's nice, but yes it's overkill.

We invested in 10G at my company. The office was new, so they installed cat6 cables which weren't that much more expensive, and we got multigigabit APs around the office so It's nice to know we can saturate all of them at the same time if people are downloading larger files. We have a NAS, and some servers, power users etc. We had a gaming room planned for streaming and stuff and hey, downloadnig games from Steam and being able to upload content that fast was great. We got a beefy multigigabit switch from FS that cost like 3000 dollars, the thing was expensive but boy is it robust and well built and going to last another decade at least. It's nice when everything is future proof. The 10Gbe adapters are a **** in the ass, and we only have one or two video editors using them at the office because they are so expensive. Setting up the MTU and making it work reasonably well , installing drivers is just not worth the hassle. 10G isn't really about the single workstation performance, it's just the maximum throughput and should only be considered if you have multiple users hitting the network at the same time.

There are a couple of quite important things you skip over. First, not everyone is on a laptop and stuck with USB. Good old PCs with PCI slots are still a thing, especially among gamers, and the USB problem does not exist for these. Second, the issues you have with 10gbit goes away if you do fiber instead of ethernet, but then the installation is very difficult, unless you have a setup where you are close to your switch and NAS. Third, power draw is ethernet only, SFP+ are not power hungry. But you did give me something to think about, as I was thinking about doing 10g from my rack to the desks. I may have to accept that it's SFP+ or stay with 2.5gbit. I have the same UniFi 24 enterprise switch as you, so I can do the 2.5 gbit in that. I also have a UniFi aggregation switch (the small passively cooled 8 port) so I have a couple of extra SFP+ ports.

This makes so much sense as i recently setup my rack and considering setting a 10Gb network. However, this will require me a 10Gb switch which for my use case I think is an overkill. Thanks for this video, now I am trying to redesign my network for 2.5Gb ^ ^

For a home user, where cable length is usually not more than 30 to 40 feet, a 5e cable can easily handle 10g. I use a 10gbe nic on my desktop and get the full bandwidth with no issues.

What might make sense is accepting YMMV. Practically, someone could set themselves up with 10GbE where and how advantageous (e.g. to/from desktop rigs, some NAS setups, and network available SSD resources), while deploying 2.5-5GbE where appropriate, like SpaceRex's couch (er, laptops), some WAN points, etc. A home's arteries could affordably consist of 10 gig with its capillaries using 2.5-5 gig.

I sub'd maybe less than a two weeks ago and only because I went down the route of a synology NAS for my business and editing work flow. You have opened a new world for me and I'm loving it. I did end up getting the 1522+ and can't believe I'm editing 4k 265 Log in Davinci Resolve over 1gb wifi signal. I have been using an Orbi wifi 6 setup for a few years and I'm wondering if it's worth going to the 6E version and even pick up the $150 10gb adpater for the 1522+? My houses is just under 4,000sqf and I'm not hard wired at this point. Keep rocking it!

This has been something that has been maddening for me for a while. The industry should have kept up with the technology advancements from the beginning. Point the fingers at whoever, whatever. But as it's pointed out, 1Gbe has been around for a very long time, and considering we're talking about computer technology, it's ancient, and should have been dealt with a long time ago. Since then we have had SSDs hit the market that are way faster than the transfer speed of a 1Gbe connection. M.2 drives blow it away, and they have been around for almost 10 years. Now, even HDDs are way faster than a 1Gbe connection. And what's even worse is that in many places, home Internet has been at 1Gbe for some time now, and some places are offering even faster than that. Their "sales pitch" is that your computer may not be able to connect at that speed, but if you have multiple users, you all connect at faster speeds. It's all BS, and Ethernet shouldn't have taken 15+ years to be upgraded. It might have been a bit more expensive at the start, but mass production would have taken care of that really quickly.

Excellent, helping me make decisions at a time I'm considering an upgrade for my Network. Many thanks!

I think what's not being addressed is that yes 2.5 is more convenient, but you're not getting a huge step-up in performance for the money. Upgrading from 1Gb to 2.5Gb doens't really make much sense.. if you're going to replace infrastructure. Specially if you consider other "hacky" solutions like link aggregation. I will say that if you're gonna buy a USB dongle, you might as well get 2.5Gb since the price on those aren't much more.

If I'm getting a 10GbE adapter, switch, router, NAS, etc. that means I already did my homework at least and have an idea what other equipments or cables to get and how to test it. I will also make sure that jumbo frames is enabled on all the devices where 10GbE traffic will pass through. This is just what I did and I'm able to take advantage of the full 10GbE bandwith. It's nice when transferring terabytes of data fassssst! 😁

My router, desktop PC, and NAS are all in one location at my desk. The two RJ45 10gb cards I got, one for my desktop and the other for my NAS, was pretty cheap and works flawless. I bought some RJ45 Cat 8 cables which was also low cost. The hard part was finding a simple and cheap 10gb switch with multiple RJ45 connections. I ended up finding one by Zyxel which has three 10gb RJ45 ports, and one 10gb SFP+ port. The rest of the ports are RJ45 1gb. I actually gave up looking for a RJ45 10gb adapter for my laptop, cause the reviews on all of them were so bad. But I don't really need it for my laptop anyways, just wanted to have just incase I would. All together my 10gb setup cost me around $380.

10Gig is cheap as long as you don't buy brand new. Buy used enterprise equipment, but don't buy 10gig Ethernet. Buy 10gig SFPs and 10gig switches using multimode which is all very old and cheap as heck at this point. 10gig copper is still quite a niche and not a great situation overall. 5gig or 2.5gig however would be decent.

This is an excellent video with so much truth. Yes, I planned on going 10G, but I looked at switches and everything. Then, I just realized too expensive for what you get. Yes, I do some big file transfers -- say system backups, video downloads, etc. But, I just keep everything on a file server, so once it gets there, it doesn't go anywhere else. So, even 1Gb is fast enough for almost anything that I do. So, I am taking your advice and only going to upgrade to 2.5G, which will serve my family for quite a while.

Hey there! I wander: one year later....are you still rocking the 2.5? Personally I will probably upgrade to 10Gbe anyway. As all the wiring in my house has to be redone anyway. Internet now enters in the oposite site of my house. As cable management is a bit tricky in my house, I will probably directly go for cat8. So that I'm set for the next decade or so :)

Title is misleading, should be replaced with “cheaper”.

Great WIll. Another great video. thank you. Would 2.5 be better for me if I want direct internet in my thunderbolt as Im using my 10GBs for my Synology?

thanks for the video. I didn’t know that seven HDDs are enough for 10 GbE. I was sure, that you need at least an all- SSD build.

I ended up buying a 10gbe switch after watching this because despite slow adoption, it still seems better adopted than 2.5 in retail channels. The switch negotiates down to 5, 2.5, 1 and 100mbe. The switches with 2.5 ports plus a couple 10s for uplink weren't hugely less expensive than 8 ports of pure 10gbe. The 2-5x price gap shrunk a bit (in the unmanaged realm) in the year since this analysis. The way 2.5 combined up/down channels is a practical shortcut but still a shortcut. The heat factor is mitigated in my home environment because not every client is going to be reading and writing hard from the NAS and can stick with 1gbe or upgrade to 2.5gbe. Will still he using 2.5 adapter equipped devices (e.g. USB-C 2.5 adapter on my Macbook) with this 10gbe switch due to its negotiation capabilities working well. I want to like 2.5gbe more and on paper it's the type of solution/approach I traditionally like, but I couldn't make it work on paper for me when it is so easy to run new Cat7 and Cat8 in my house. It'd be an awesome upgrade for a SoHo or small business that just got fiber internet using their existing wiring - just a switch, $30 add-in cards (available in half height for those little Dells!) to get the clients up to speed and push the next upgrade out for a few years. By the way there is a good interview here on KZfaq with the primary engineer of the ethernet standard. It's a fun watch, his insistence on design considerations for interoperability and long term extensibility (that cost him friends and even his job once) have influenced the way I implement solutions and defend my future-considering and simpler design choices in my own engineering projects.

100 percent agree. I've deployed both several times and yea ur spot on here. I still like having the 10gig sfp+ in my own network. Because I like playing around with it. Not because it's in any way practical or worth the effort. I can barely tell the difference in terms of day to day use. Even saturating a 10 gig line during a file transfer can be challenging. I've almost always got a hard drive on one or the other end of the connection. Which is typically slower than a 2.5gig link

Great info, thanks much!

Besides vendors trying to justify why they don't have 10gbe in this day and age, I have never seen anybody do such an argument. The argument is interesting, and include very good points. Desktop macs of many prices have 10gbe option or out of the box since at least. 2017. Cat7 cables are no longer so rare, and a bunch of NAS products are coming with 10gbe. People that are becoming to move from DASD to NAS as prices converge are used to high performance, something that 2.5gbit ethernet can't give you. For a modern person who used to have at least a sata SSD a NAS need to be close to 500MB/s that is not something that 2.5gbe can do. 2.5gbe is like attaching a spinning drive to your computer but with higher latency.

I don’t disagree with most of that - but Multigig switches are still tough to find. Especially in that 12-24 port range. Basically boils down to having to get a couple of 8 porters with SFP+ and linking them at 10g. But then you’re into more expensive switches for the SFP+ cages, the SFP+ modules, and fiber cross connects ( or hot 10G-Base-T runs). Multiple points of failure with lower MBTF ratings - And your cost and complexity shoots up. We need more M-Gig 16-24 L2 switches out there so we can upgrade our home networks that have cat5e. Even in a mixed GigE and M-Gig topology - by the time you start trunking nas ports, 2.5g backhauls for your wifi6 APs / satellites, and a few power workstations - you can blow past 8 MGig ports.

thankks as always gr8 usefull content

Absolutely. However, I'd like to know how to use link aggregation to have, for instance, a 5Gb network together with something like to Asus Nimbustor NAS

From what I've seen it's 1 or 2.5GB on home routers. Makes sense to me. Many also believe fibre is the way to go for 10GB too this making it inherently even more expensive. But with Apple providing 10GB Ethernet ports on its small computers I'll be interesting to see how it actually performs.

very informative and balanced review, thanks 😀

Hey SpaceRex! Love all your videos and work, you're practically the reason for my entire synology/server hobby. I wanted to ask if you could maybe help in providing the community and myself with the MediaWiki package on synology. I find there is very little documentation for using it with synology or setting it up, particularly with making the wiki available outside the local network. Any help would be appreciated and thanks again for everything you do! :)

Great tutorial! Many thanks. Very helpful.

Hey SpaceRex, I Love your videos! verry helpfull ! So I have a question: I have 10gb Ethernet on my PC and I bought a DS920+ Synology Nas ,with 2 1 gb connectors : Is there a way to connect it in 10 gb to my network? Is there a way to connect it in 10 gb to my network?

I'm currently installing multi-gig switches into my environment, primarily to support the faster wifi standards coming out. Its inevitable at this point. 1GB cable speeds suck, and like you said, lots of places are stuck behind that wall.

Hey, Rex. I just wanted to say thanks. I upgraded my servers and laptops to use 2.5Gbps and I'm getting 10x network transfer speeds! For my Synology arrays, I had to use ASUS USB dongles and I found a github for the chip driver. Thanks so much!

I built my house in 2004, and luckily spent the extra money on cat6; 10 gbe is just too expensive for now, so 2.5 sounds great (as long as legacy 1g connections still work). Can you recommend a rack mount 2.5gbe switch? I'd love two 10gbe ports to hook the nas up to my office, but that would be a bonus.

I'm new to networking so I may say something or ask something that might be obvious to gurus but not me. I was planning on installing Ethernet throughout my house. I wanted to use an Omada system for the sake of simplicity and having everything talk to eachother. would a 2.5 network be sufficient for adhoc gaming and media or should I look at a 5g setup so as not to saturate 2.5?

Thanks for shared real life experience with audience. It's really useful.

I love the way he talks. Thank you for this informative video :)

I somewhat regret not futureproofing my newly built house with cat6 or cat6a, but for all the reasons you mentioned, I'm not that worried. 95% of households are more than serviced with a 1Gbps LAN, if they even use the wiring instead of just a router/modem/access point only capable of 400Mbps. I don't have large amounts of data to transfer unless its the rare backup or setup of a computer which is extremely rare, so I don't mind it taking a few days if its only once every couple years. In the future, my house will be capable of 2.5Gbps and possibly even 10Gbps since all the runs are well under 40m if not 35m. I bought a 16 port fully managed 1Gbps switch for $75 used and am satisfied.

I opted for 2.5 in my home. My goal was to be able to stream 4K video from my NAS over Wi-Fi without bottlenecking the network. The eero Pro 6e I have can broadcast over 1Gb and supports 2.5Gb wired LAN, so 2.5Gb was the way to go. Overall I'm very happy with the performance. Gigabit internet is plenty and 2.5 for a home network seems just right. I think I'll be sticking with that for the foreseeable future.

Well I'm planning a DS923+ NAS. I'm considering a Netgear GS110EMX managed switch. Switch and NAS will be colocated. The Windows PC will be at most 24 feet from the switch. Which speed Ethernet cards would you recommend for the NAS and PC. I really don't think I need more than 2.5gb, and 5gb cards are hard to find. Can I put a 2.5gb into the DS923+ slot? Thanks!

I have been working my way towards 10Gbe. In 2014 I ran Cat6 everywhere. I have the Unifi 10Gbe eight port aggregation switch at the top of my network. Cost was around 260.00. In most of my house there is no need for anything higher than 1Gbe. Except in my office where I am working towards 10Gbe over time. I plan on upgrading my NAS with the one from Xi systems. And plan to build a Proxmox server for other services. I figure if I am building new I am going to work towards the fastest speeds reasonable. I do not disagree with what you are saying in your video. In my case I just want 10Gbe where I can get it.

Hey, thanks for all of this. More for me to consider. I just watched your DS1522+ video before this one. Great video, btw. So, if I want to transfer video files (using a 2.5 GbE plug in adapter) from my 2021 MBP M1Max to the new Synology DS1522+, I'd need to buy the optional Synology 10GbE expansion card. Looks like the DS1522+ NAS only comes with 1 GbE Rj-45 ports?

Suppose I use a MacStudio with 10G port, can I connect to the DS1621xs+ 10G port with good bandwidth?

This guy spits straight facts. I just switched my NAS and Desktop to 2.5G and it's amazing. I transferred a 12GB file to my NAS so fast that my first thought was an error occurred lol

Is there a Synology Nas with 2.5 gigabit support reasonably cheap for home use?

6:05 "Those step-down circuits actually are pretty inefficient." You must be thinking about linear regulators. Switching DC-DC converters with synchronous rectification commonly achieve 92+% efficiency. The power supply is at most a tenth of the reason why 10GbE needs large heatsinks, the bulk comes from all of the signal processing needed to make 10GBase-T work. Thunderbolt transceivers are also kind of power-hungry themselves.

I went with a 10gb switch and router. Asus GT-11000 pro > TPLink TL-SX1008 (10gb 8 port switch) > 2 x Dlink DMS-106xt (1x10gb port, 5 x 2.5gb ports) > 2 x Asus GT6's. This will fit my needs for a while. Anything client side will just need to be upgraded as manufactures adapt with demand.

I've been running 10gig at home since 2014 using decommed Enterprise SFP+ server NIC's from eBay, and loving it. SFP+ DAC cables for short runs, and transducers and fiber for longer runs. Recently I grabbed a couple of 40Gig Intel XL710-QDA2 adapters, and I am loving them even more. I mean, if you use Ethernet on a USB or Thunderbolt adapter, this criticism might be accurate, but who does that?

I have 10 gig ethernet in my home. A combination of OM3 fiber and CAT 8 ( the latter - questionable as to its worth), 10 gig ASUS Router and 16 port 10 gig switch SFP+ . I have 3 servers, of which I really only run one for power consumption and noise reasons. I currently have 1 gig fiber, and I will be the lucky recipient with my ISP, of being a guinea pig for their 10 gig test to my home. Yes, I'm beaming, right now! My experience with 10 gig is that it most certainly works well, and the extra headroom into and out of my servers does very well. I'm sure that there are very few services out there providing a 10 gig experience at their website. That being said, I'm old enough to remember when there were many naysayers out there stating that 1 gig internet was never going to be necessary. And, here we are today with that standard. I will always contend that the extra headroom is noticeable and useful. I'm looking forward to be the "crash test dummy" on this one! LOL Thanks for your videos!

I'm about to order a Synology NAS. I was going to get the OWC 10Gbe adapter but then I realized that my CalDigit TS4 has a a 2.5 Gbe port on the back. Can I just use this to connect to the NAS and not order the OWC? Thanks.

Thanks for your inputs, for my understand that 2.5G LAN port for Access Point advantage, for LAN port end point ... I have doubt. For some reason 10G is out of picture of the LAN port. 25G should be the standard for the datacenter and production centre.

Video is correct. One wrinkle: for new construction and renovations, cordially advise to stuff cat6/6a into the walls. Will render the property more "future-proofed" and hence _marketable_ / re-saleable.

If I was going to use 10G I would just go Fiber optic. Funny, we have some 100G stuff at my work which actually uses copper, but use QSFP28 cables.

Thanks for the sensible advice

These are excellent points that have helped me reconsider going to 10gbe.

qnap makes a cool 2 - 10gig - 4-2.5gig that does multigig nicely - unmanaged. nice to get to a 10g port on nas from desk/laptop for those big files.

Could you do multiple of the 2.5 Gb connectors similar to what you’ve shown with multiple 1Gb? Then you’d have ~5Gb say to the 5 port switch? I was thinking two 2.5 to the NAS and 2 2.5 to my Mac and the switch is 5 port, so one uplink and the only extra cost (I think) is the extra 2 USB connectors…if doing this is supported.

Thank you man!

Can i use a usb3 2.5GBE adapter on a synology ds1718+? If so please recommend one.

Came here because I’m looking for AM5 boards and a couple of them support 10gb ethernet. Don’t really know if it’s necessary but guess I have to look up how speeds are here in Japan and even if my provider and router supports it, if it’s worth it.

Thank you for the video. Very interested in 2.5Gb but you failed to mention accurately what type of USB interface is needed on the adapter. I know it can be A or C but I assume it must be one of these two at the host level port or hub. SuperSpeed USB 5Gbps - USB 3.2 Gen 1×1 / USB 3.0 SuperSpeed USB 10Gbps - USB 3.2 Gen 2×1 Most Macs only have 😂5Gbps Type A ports but most Thunderbolt hubs have both C and A that support 5 or even 10 Gbps. My new QNAP RAID and QNAP both support 2.5 GbE.

this is very dongle specific though, what about a desktop PC using a PCI-E card instead of USB? I'm also curious why 10gb, after all these years is such an issue. I'm old enough to remember having a 10base t card (100 were available but way outside my budget at the time) but we seemed to go through 10/100/1000 as a fairly natural evolution, all the while increasing speed by an order of magnitude. 1gbit has been around for a long time, why is jumping up one more zero so much difficult?

My laptop have a 1GB network card, my desktop have a 2.5GB network card, the internet carrier router is 10/100/1000 gigabit, i have a 500mb internet plan from my internet carrier, my internet cables are cat6A. With these picture in mind , is possible a 500mb plan from my internet carrier multiply to 1Gb and 2.5Gb of internet speed to my laptop , desktop and through my gigabit router ? Please explain me how.

How would you do 5gbe networking, I hardly see any 5gbe to USB adapters

A lot of homelab servers support 10g or 1G and won’t recognize 2.5G. This is one of the reasons I switched to Dell 730’s.

NO! It is NOT better! But it is much easier given the much cheaper price and “enough” speed!

Hi ! thanks for th e informative video, Can I do a 4K Edit with D-link DMS-106XT | 6-Port which has 2.5 gigabyte speed to coomunicate with 2 computer?

Hi I have question ! I bought SABRENT 5-Gigabit Ethernet adapter for my MacBook Pro m1 MAX try to get 5gb speed from my Synology nas . I have 2 nvme for read and write and 10Gb card on my Synology ! I also have 10Gb switch TP-Link TL-SX1008!!! My question is when I plug in my 5gb adapter to my MacBook and it work just for 5 seconds and the I don’t have internet and I get kicked out from nas at the same time ! Can someone help please

Editing 4k in raw in 2.5 is acceptable with some LAGs.... but render, the time was almost 3x longer!! 10gb is life!

Do I stumbled upon this in Realtek 8125 description - that it's supposedly supports "2.5G Lite (1G data rate)". Have you ever seen anything like this?

Thanks!

1gb was sufficient for hard drives and internet for a long time. It still is if you are a wifi house. If consumers needed it I think it would develop faster. Now worth fast nas and internet some enthusiasts are considering it.

I wish you title your video “2.5gb vs 10gb Ethernet port, which is better?” I been looking for hours and I just found your video

I have a NAS with NVMe in it. Saturating 10GBASE-T is trivial (1.1 GB/s). I use this for part of my Steam library. You show a laptop in this video. Mine is on 802.11ax.

Currently running 200-400MB/s over thuderbolt networking direct between 2 computers using a USB-C cable. 2.5Gbit ethernet would be slower. Looks like i should get 5Gbit switch (480MB/s) ...but they don't seem to exist (at least in small port numbers). Guess i'll just have to go for 10Gbit if i want to free up those USB-C ports. But you're right, it's not really worth it yet..

You can archive 40 Gbit Ethernet dirt cheap currently ( and yes its overkill , at least until i upgrade my NAS with SSDs but i guess thats only a matter of Time ) . I payed for a Dual 40 Gbit Card 30 Dollar .. , its HP LOM Format , but you can buy an adapter to 8x 3.0 PCIe for 15-20 Dollar . I have now a 40 Gbit direct connection in the first slot to my NAS and a 10 Gbit ( with an QSFP+ to SFP+ Adapter ) to my old Switch which was not that expensive ( Mikrotik CSS 326 with 24 x 1 Gbit and two 10 Gbit SFP+ ports , 150 Dollar ) . The only problem is maybe , to archive 40 Gbit Ethernet you need 8 Lanes 3.0 , real 8 Lanes , not chipset Lanes but it works with 4 Lanes as well ( at reduced speed ) . I deactivated the 2,5 GBit Intel Nic of my Motherboard

Please tell me you know the difference of USB 3.0, 3.1. 3.2 3.2x2 thunderbold3 and 4

I just recently bought a NAS and have been redoing my network and had been considering going 10 gbe, but I ended up going 2.5 gbe instead. With used enterprise switches on eBay, it's pretty easy to get a 2.5/10 gbe switch for ~$100. However, most of the 10gbe switches will need transceivers for copper (which will add to the cost). 10 gbe IS coming. Most high end PC motherboards from the latest generation do have 10gbe onboard. Almost every decent motherboard from the latest generation have at least 2.5. The reason I chose not to is that *I currently don't have any devices that can make use of even 2.5 gbe*. As said in the video, 10gbe (if using copper) uses CONSIDERABLY more power (500 watts vs 50 watts for a fully loaded switch), and to "upgrade" any current device (via PCIe or USB), 10gbe still costs significantly more. It's certainly on it's way, and I think on *new* devices 2.5 is even more common than 1 at this time, but I can imagine 10 being standard in the next 10 years. However, in the next 10 years, the price and power consumption of switches will also decrease. Regardless, with a cheap $20 2.5gbe adapter, using multichannel SMB on my Synology (with with 4x1gbe ports) I can hit 270 MB/s, which is close to saturating 2.5 gbe. Good enough for now, I think.

I bought 8 port spf+ tp link switch TL-SX3008F and it does not get hot couple of fiber connections and it works great never had any issues, beside ping are in 1 milisecond cobine with Bt fiber in prem , execelent for gaming . Accessing achived blueray from my cached nas is pretty much instant (50gb movie) over samba no fuss , no tranconding. Just works no issues . Cannot say that about 2.5gbe

Would 2.5GB allow to work directly from the NAS editing RAW, 1080, 4K video, or is it better and/or need a 10gb connection?

SpaceRex you are my source for all things Synology, and I desperately need help. I've got a 1621+ Synology, and the laptop dock I have has a 2.5gbe connection on it (also the laptop has 6E wireless, and my router has a 2.5gb port on it and is also 6E). I am trying to find a 2.5gb card, plug and play I can put in my synology NAS. I can only find 10gb cards on Synology site list. I can't use a USB connected 2.5gb adapter because both of my USB ports on the synoloty are occupied. HELP! What card can I install inside my 1621+ that is 2.5gb? Thanks!

1:37 My two year old TV apparently didn't get that memo, as it only has a 10/100 Ethernet port.

What you say makes sense for the laptop world. Laptops don't generally have the horsepower to require a 10G connection.

10gm make more sense on fiber or on dac cable. It does not heat as much. Great for the uplinks

I still run 10Mbit half duplex and it's good enough, my modem is 56k after all.

Thing is, you can get super cheap 10gbe fiber cards. I’m tempted to upgrade my 2.5gbe usb adapter.

1gbps is indeed too slow to be the modern standard connector...especially for home or small office environment, however it is usable. 2.5/5gbps auto negotiation makes much more sense. Important stuff can be on 2-3 port lagp/lacp, such as switches, routers, servers, and nas.... 3x5gbps handles pretty much anything you throw at it. Why not 10G... historically, these generate too much heat and higher switch fan speeds(noise) while being much more expensive per port. Especially if you add 30-60w POE options on each port. 12 port 1/2.5/5gbps managed multigig switches with 250w POE budget will sell really well. Enterprise can have 25gbps uplink ports.

It seems like there's space for a consumer optical network standard. Everyone I have talked to that has tried 10GbE says it's a huge pain.

I have the same 2.5g ugreen adapter as you, I'm on a M1PRo. however I can't get more than 108 mb/s Am I missing a something? I'm connected directly into my 10gb card on my DS1621 +

I just upgraded to 1.2 gig from my provider. I just go online and download data. I don't have a LAN its just plugged into my computer. I bought a 2.5 gig pci card. Speeds are erratic. I think I might upgrade to a 10 gig card. I have a Cat 9 cable from my modem do my computer. What do you recommend. Should I try a USB type for just connecting to the internet?

Can you add a USV 2.5GbE to a DS920+?

For me it comes down to price and what I don't understand, is why 2.5gbe switches are still so expensive. I'm close to just jumping on a 4 port SFP+ microtik switch and then just decide what transceiver and cable to use.

Ha I'm going the other way ... E25G21-F2. Love the videos Rex. :-)

Drats.....I just got a 5 Gig Fiber Internet from Frontier. Why is it so hard to find some 5 Gbe unmanaged. switches and a good wifi 6e mesh system for wired and wireless connectivity in my home. I have upgraded all my ethernet cable to cat 6e already.

I tried to - foolishly - put up a 10 Gig network for 10 PC running 3D design programs. Paid few thousand bucks for a 10 gig switch having only fiber ports. No problem ....just take fiber to ethernet adaptors ....not really, as those get hot like a stove. Hence the switch manual allows max every second port to have such an adapter. Yeah, never got it running. So I bought a qnap switch for 2.5 gig. Works like a charm. It has 2 fiber and 2 ethernet 10 gig ports. I connected the synology to 10 gig ethernet. Length of cable 0.5 meter. Synology could,d not connect at 10 gig even with cats. Cat8 did the trick. So much to THEORETICAL cable requirements for 10 gig.....did any of the users ever complain about low speed on 2.5 gig? Not once in over 3 years. Contrary, they praise the fast network. Don't be stupid like me! Because if you really need 10gig you also MUST have fiber cabling and not ethernet! Otherwise you will get a 10 gig network running at 2.5 gig (if the ports allow this maybe 5 gig) anyway.

2.5GbE is better than 10GbE, from the person who just wired his house for 100GbE fiber! ;-) Love your videos and all your work.

And here I am wondering when we'll get MORE than 10GbE over copper anytime soon. I want to have a nas made up entirely of nvme drives, 10GbE is way too slow for that.

I have a Synology 920+ that’s 1Gb, but can do link aggregation. Is it worth finding a 2.5gb switch that supports link aggregation to connect to my desktop computer? Is it possible to connect a 2.5Gb USB adapter the the Synology NAS USB port?

I agree. If you need more, go used enterprise gear

@3:47 use in my underwear? Now we are getting to the real benefits of higher bandwidth networks