2 speed axle- how to shift, pt. 1

Рет қаралды 33,726

2 жыл бұрын

Shifting demonstration. Several makes and models of medium duty trucks used this axle. This quick demonstration should help you feel more confident about starting to operate a truck with an Eaton 2 speed axle.
Stay tuned for part 2: fine tuning your shifts

Пікірлер: 27

@misters2837 2 жыл бұрын

You don't need to "clutch" going from Low to High...All you need to do is break the torque on the rear-end (Let off gas and wait for rpm to slow, and re apply gas pedal).... I have had 2-speed axles with 4/5-Speeds and Allison automatics...

@JakeRoy98 2 жыл бұрын

Great video, it’s pretty simple I’ve drove 2 speed rear axles I like them because you can use a clutch unlike a 10 speed

@mikeanderson3576 Жыл бұрын

you can double clutch a ten speed

@MrJeep75 Жыл бұрын

What a beast of a truck

@erichkestler1934 Жыл бұрын

That is so cool!

@jaratt85 2 жыл бұрын

Holy fuck... you're back... Good to see you again bud.. been a LONG damn time! There's two different ways to use those things, most people run 1L, 2L, 3L, 4L, 2H, 3H, 4H because 1st doesn't typically have a synchro.. if you watch tow trucks that's how they typically shift. Then there's the way you say which is more like having a mechanical overdrive/gear splitter sort of like a GearVenders except full mechanical. Sorry to hear that the boat shop and comedy didn't work out, be thankful you have a job though, I haven't in 15 years.. My scoliosis has gotten a lot worse, I found out I have a brain defect called Chiari 1 Malformation and to top it off I finally figured out that I'm autistic. Yay me eh?! Oh and I'm 6'10 now LOL!

@terryherrera5252 Жыл бұрын

Whoa !! My Spicer is different !!! 1 H-2 H-3H-4 low-5 low- THEN 4HI -5 HI With a load ! Low-Hi in 1-3 confused yet ? I learned this at 12 years old !! Driving my Uncles 1966 Chevy C-40 !!🤣😂 Took us shoring his Hi-Powered Rifles ! He n I are Left Handed !! Gun stocks were also ! Loved my Uncle !!! “Don’t tell your Mom or Dad !!” BUT! Really ! 4 low n 5 low geared !!

@mikeanderson3576 Жыл бұрын

depends what you need

@briansorensen7195 Жыл бұрын

Guide info Thank you!

@lowBRAZIL 7 ай бұрын

nice bro!!

@roundsm18 29 күн бұрын

I have a 10 speed with a Detroit. This seems like somewhat of a pain by comparison.

@sikosis999 Жыл бұрын

nicely done and good to keep the 'finer arts' from newbies :)

@karlschupp8552 3 ай бұрын

I just bought a 1972 F600, my reverse is down on the left.... Is it still going to be the same sequence???

@justinsigmon1878 Жыл бұрын

How much does this truck weigh with nothing in the dump bed?

@butface069 Жыл бұрын

24,000 lbs, was that with the bed loaded up? Any idea what it weighs when empty?

@glennbonnell4241 7 ай бұрын

1.000,000

@gmrocwater9922 2 жыл бұрын

👍👍👍👍👍

@JakeRoy98 2 жыл бұрын

I never pushed clutch in to shift the rear end I thought you only push in the throttle and let out

@BigAgitator 2 жыл бұрын

It says to clutch on upshift and to do what you described on downshift. I think I’ll clarify that in part 2. If you upshift without the clutch, is it on a vacuum rear or an electric?

@JakeRoy98 2 жыл бұрын

@@BigAgitator I believe vacuum I never clutched into use the 2 speed rear end just let off gas a bit and back on. Hmmm 🤔

@65Red 2 жыл бұрын

@@BigAgitator mine is electric and it causes no damage to go from lo to hi without the clutch. Just like the other guy said, come off the throttle for a second to break the torque on the driveline and it’ll shift.