20 Note Editing Tips for the Maschine MK3 / Plus Controller

Рет қаралды 2,120

Күн бұрын

🚨🎓 MY MASCHINE COURSE IS LIVE: 🔸106 Lessons🔸9+ hours of video,🔸1,000+ flashcards🚨🎓
🔗 learn.musicmemor.com/maschine... 🔗
In this video, I'll share 20 note editing tips for the Maschine MK3 / Maschine Plus controller. Note editing through the controller, rather than through the software, can be a fun, tactile experience, that can improve your workflow once you get good at it.
When you make beats, you are going to need to note edit at some point. This tutorial will break down where you can edit notes and how. You'll learn a bunch of controller shortcuts that you can implement using the buttons and knobs on the Maschine controller.
🚨🎓MASCHINE COURSE INFORMATION:🚨🎓
I tried my hardest to create the best resource to learn the Maschine MK3/ Maschine+ (Plus) and the Maschine 2 software. Here's the run-down:
- 106 lessons organized into 23 chapters
- 9+ hours of video material
- 1,000+ digital flashcards you can use to study
The course will go over a wide variety of topics and concepts and I will teach you everything I know about the Maschine controller and Maschine software. I hope this course can help you level up your Maschine skills.
🔗 learn.musicmemor.com/maschine... 🔗
Timestamps:
0:00 - Intro
0:13 - What is Note Editing?
0:57 - Tip 1
1:30 - Tip 2
2:02 - Tip 3
4:00 - Tip 4
4:42 - Tip 5
5:04 - Tip 6
5:39 - Tip 7
6:45 - Tip 8
7:08 - Tip 9
8:38 - Tip 10
9:19 - Tip 11
10:15 - Tip 12
10:45 - Tip 13
12:06 - Tip 14
12:35 - Tip 15
14:25 - Tip 16
14:45 - Tip 17
16:02 - Tip 18
16:56 - Tip 19
17:41 - Tip 20

Пікірлер: 34

@tshepomoleko6708 2 ай бұрын

I'm was able to do almost everything in Maschine except for note editing. But after this I should be considered a Ninja.

@MusicMemor 2 ай бұрын

That’s great to hear 😄

@palimo3653 6 ай бұрын

Just purchased the course. That flash card system is great. Definitely the most complete Maschine course available!

@MusicMemor 6 ай бұрын

Thank you! I appreciate the support and I'm glad you like the flashcards 😁

@LifestyleDJ 4 ай бұрын

This guy's voice is ASMR. Lovely tutorial !! TY!

@MusicMemor 4 ай бұрын

Thanks!!

@ALWAYSFINO 2 ай бұрын

Thank u so much for this videos ❤🫡

@MusicMemor 2 ай бұрын

You're welcome!

@syntheticfauna 6 ай бұрын

Is too much to ask for an indepth master class on arrangement , clips, FX channels, bus and other tips to complete projects? That would be awesome!

@MusicMemor 6 ай бұрын

I've created a few videos on arrangement on this channel and one video on clips. As for FX channels and bussing, I'll probably get to those at some point. And, I don't want to shamelessly plug my new course, but I do want to say that my course goes into all those topics and more to help you complete projects learn.musicmemor.com/maschine-accelerator-2

@niellseen 6 ай бұрын

Very good Maschine tutorials 😊👍

@MusicMemor 6 ай бұрын

Thank you!

@zhukmy 6 ай бұрын

Thank you so much!

@MusicMemor 6 ай бұрын

You're very welcome!

@SeanMadden Ай бұрын

Another fantastic video. I just converted from a Mikro MK2 to the MK3 and while I'm very familiar with the Maschine Software, I try to touch the mouse as little as possible as it's just not as "fun" for me to produce or make music with the mouse and clicks. Learning how to do as many things as possible on the hardware is super important for me to really enjoy the process more and this video is yet another great display of how to do that. Thanks again, keep up the great content!

@MusicMemor Ай бұрын

Thanks for the comment! I agree with you. It's more fun and tactile to create as much as you can using the controller.

@Stephan326 Ай бұрын

will your videos benefit me if I am using mikro mk3?

@MusicMemor Ай бұрын

@@Stephan326 I believe they would. The software at least will be the same between the mikro and MK3/Plus, and I frequently discuss the software

@Mu1974 6 ай бұрын

Awesome Video, Bookmarked!

@MusicMemor 6 ай бұрын

Thank you! 🙏

@hvhvgitaar 6 ай бұрын

Another excellent video, thanks! I find that using the controller (I have an MK3) very quickly becomes a lot faster than the computer screen and mouse. Keep up the good work! I love the Maschine platform except for the way it deals with Audio. I record guitar and vocals as Audio, along with midi for drums, bass and other virtual instruments. Arranging the Audio (using clips) in the song mode remains clunky, but maybe you have tips on how to make that more frictionless?

@MusicMemor 6 ай бұрын

That's great! I find that to be true as well. Hmm what part about it is clunky to you? This could help me narrow down thinking about a solution

@alinaa7871 3 ай бұрын

Thank you for the amazing tips! By any chance do you know if there is a force legato function in Maschine? I am used to using a hot key for this in the piano roll in Logic, which is super useful for pads and chords, and any sound where I would like one note to end exactly before the next note begins. But in Maschine I have to manually adjust each note which takes ages. There must be a way to do this but I couldn't find any info online. Would really appreciate any advice!

@MusicMemor 3 ай бұрын

I don't think there's a way to do this unfortunately. I've run into this issue too. The quickest solution for me has been to highlight all the midi notes in a pattern and drag the length of them all at once

@alinaa7871 3 ай бұрын

@@MusicMemor thanks for the reply! That's a shame

@gball3110 6 ай бұрын

Is there a way to see the position of a midi note at a more granular level than 1/16th?

@MusicMemor 6 ай бұрын

Yes, you can do this by adjusting the step grid resolution. I do this in tip 7 of this video if you want to look there

@Two-Vees-In-a-Van 6 ай бұрын

Some excellent tips Brandon, thank you, much appreciated. Any idea why I get the message N/A Master quite often when editing events? The message appears on the top left screen and I cannot edit or move around the events, no idea what I have done but get it often and no one seems to know what it means or how to clear it, Hopefully you are the one that knows. Great vids, just subscribed, thanks

@MusicMemor 6 ай бұрын

That's odd. I've actually never seen that before personally. I'm not seeing anything about it in the Maschine Manual (from Native Instruments themselves) either. I wish I could help

@Two-Vees-In-a-Van 6 ай бұрын

@@MusicMemor Thanks for trying to help Brandon. Yes it's a strange one, the Midi is imported from another project/workstation so it may be the Maschine is getting muddled with external created Midi notes. When moving around the patterns and editing all goes well for a while until seemingly at random the problem occurs. Once the message/error appears it is impossible to edit any event in any pattern, effectively editing is blocked for the whole project. The only way I have found to proceed is to save the project, load any other project, then reload the original project and all is well again and I can edit again. (sometimes just reloading the original project works too). Very strange and extremely frustrating as it can happen quite often. I posted a vid showing the problem on FB if you are interested, let me know, thanks again. Just off to look at your vid tutorial course now, that sounds interesting, thanks again

@MusicMemor 6 ай бұрын

@@Two-Vees-In-a-Van Yeah, that is strange. Idk if this would work, but maybe you could copy all the MIDI notes and paste it into a new soundslot in a new group.

@Two-Vees-In-a-Van 6 ай бұрын

@@MusicMemor Thanks for the suggestion Brandon, sadly it's effectively what I am doing as I have one pattern that is the full midi "dump" and copying this into a new pattern in each group, deleting all midi "lanes" leaving only the Midi for that group/Pad/Channel. So group A Pad 1 is Midi Channel 1, Group B Pad 2 is Midi channel 2 etc. Only 4 Midi channels so only 4 groups and of course each midi speaks to a different sound on the ModX. Works fine apart from this darn problem Grrrr! Appreciate you time to help. Had a quick look at your course, Can I see a fellow programmer at work lol (Retired IT here). Quite like the way you have structured the flash cards as that would be extremely useful, most people tend to look for KZfaq video's when they need to perform a specific task and spend ages doing a "hunt the video" that happens to cover what they want. You have neatly captured this into a "how do I " question and a video answer snippet, neat job. I shall probably purchase in a couple of weeks when my pension pops into the bank lol. Thanks again

@MusicMemor 6 ай бұрын

@@Two-Vees-In-a-Van Ah sorry that is such a headache! If i ever come across this issue myself, and find a solution, I'll be sure to share it with you. And thanks for the interest in the course! You hit the nail on the head on why I created the flashcards. In addition to their use case for memorization, using the search bar within the flashcard database can help you find answers to individual questions, rather than having to watch an entire video on one topic. 😁