Really? No disrespect to Jackman but I've been researching screen printing for about a year and this is what I'd call "average" as far as home built screen printing gear (1 color)> There are many videos out there with much more engineering put into these things. Again, with no disrespect to Jackman. Looks like it works fine for him.

@@creepybunny255 link to such videos?

Jon!! I love your videos! I met you a couple years back at Long Beach ISS!! Glad to see you again!

Hello there! Nice to see you here too. Thank you. I'm very happy to know that. Thanks for watching ;) I'll be at ISS Long Beach this January again.

+TheOwenRawk eh people will make an excuse for anything! lol

Or, they can try purchasing a shirt press instead and pay $250! Basic tools used here, you can use a cheap jigsaw or have them cut some of these pieces at Lowe's. If you don't have wood shop tools, this isn't the kind of project on which you can embark anyway!

@@ManyaP64 a handsaw can cut that piece of metal?

@@teddyblankenship782 It's called a hacksaw. They are $4.94 at Walmart. Just pull it back and forth. I've used one for over 40 years.

I think he used it to space out the two pieces attached to the plywood

Tshepzinto ! Try span screw on the spring, and strengthen^^

***** send me a medium than

16x21", the size of the plywood platform

+Ivan Mantia there aren't any plans for this but I might put some together since there have been a few requests.

Ivan Mantia

+shahid mitchell where are you located? It probably won't be worth the cost of shipping unless you're close to RI

Ill buy one if your still intrested

Jackman Works what is the shipping cost to send to Kennewick wa... just curious. Nice work by the way.

I don't :)

Lamborghini Live but you HAVE to line each color with the first ....thats where it becomes a mess with only1

It can be done rather easily. I recently learned that if you use a piece of clear plastic like transparency film, you can tape that down, and do a print on it, then use the print on the plastic to line up with the previous print, flip the film over and print on the paper or t shirt and repeat.

Jamie Ryan Downey. are you talking heat transfer stickers?

No no. I mean...you tape a clear piece of plastic or mylar down that can be flipped out of the way (I personally have taped it to the right side. So after you have laid the first colour down, you set up the second screen and you do a print of the second colour on the plastic. then, put the paper under the plastic and register it the image that is on the plastic, then you flip the plastic out of the way once it's lined up and then print on the paper...because the plastic is taped down it will not move and the image shows you exactly where the screen is printing.

Look for angle iron

Can I buy that? Let me know, thanks

haha didn't end up making plans for this one but if I did I'd charge $20 ;)

Jackman Works can you make one for me

Available on his website.

@@ManCrafting No it's not. All I found was a link to this video but no plans or way to purchase an already built version :(

@@michelebeers8411 Things change...

Do you have a drill and a skill saw? You'd be surprised what you can create with just those 2 simple tools, give it a shot!!

OK, you are right. It can be done with simpler tools. How bout $150 in tools then? Or you could just borrow them.

Exactly! Don't sell yourself short. You'd be shocked with the stuff I built when I was a kid just by borrowing my fathers corded drill and jig saw.

you can rent all those tools from home depot

I had a neighbor I called the borrower. He painted his entire house borrowing the tools he needed. He rebuilt the surround on his front door entrance with borrowed tools. He took down 2-3 75 ft trees in his yard borrowing chainsaws. He had party's at his home with borrowed tables and chairs and other things that many people can't live without. So I imagine, this entire build could be done for $20 or less if your patient and find/recycle wood and aluminum.

Don't let excuses be a reason for inaction! All you need is a saw and a drill for this one.

ChevyChafes its worth it. I had the same mind set but I went to ask family and friends if I could borrow the tools for a couple hours and so I made my own a little different from the video but I made one that works and well now I have a small business making $100 to almost $400 a day, making t-shirts for people.

Just 1 color Dave, or do you swap screens for other colors?

gruff madness what I do is make different screens

for example I wanna put a face on my shirt I make a screen with the shape of the head only color white then I let it dry then wash the screen and add the skin color. I get another screen to make the shades or any other details then at the end I have another screen with the outline so I use black or whatever other color you want. That's how I do it