This video is designed to address a high idle condition found in many ford rangers and other vehicles.
Пікірлер: 198
@kingdomairjmm29113 жыл бұрын
Thank you for all you do I watched a video of your on how to remove the heads and replace them. I was faced with this job and watched you 3-4 times and said I can do it. the job was on a truck that a brother in the lord sowed to us and the truck is still running fine today around 5 years later. God bless you pastor. Jon M in Missouri
@resurrectionauto6703 жыл бұрын
That's awesome. Glad to lend a hand!
@hirampabon25218 жыл бұрын
Man your the # 1 explaining how to do this job by troubleshooting with common sense.Thank so much. May God bless you and your family.
@resurrectionauto6708 жыл бұрын
So glad it helped! The OBDII reader is very valuable. Best of luck with your truck and God bless.
@hirampabon25218 жыл бұрын
Thank you for ur response.God bless u all.
@Dooky_Shoes5 жыл бұрын
Great vid. Gave me a little extra knowledge while working on my truck
@charley1243 жыл бұрын
Thanks to people like you it makes other peoples life easier, thanks for your help its been frustrating trying to figure out this issue , just wish you lived next door that would be great - thanks
@resurrectionauto6703 жыл бұрын
Glad to lend a hand Charley. If I lived next door to you, I'd fix it for free
@chuckg1002 жыл бұрын
I don't know who you are but I've just stumbled onto your page to find out how to clean/or replace the air intake valve and are learning so much more. Thank you so much. 👍
@resurrectionauto6702 жыл бұрын
Glad to lend a hand!
@brucel.60786 жыл бұрын
Another great video! You do a great job!!! Thanks!
@nathanmayo19187 жыл бұрын
that's a super clean engine! good video.
@kcomst5 жыл бұрын
Great summary of idle issue causes and solutions. After searching for awhile and reading a mass of confusion over sources of high idle, this made it all clear. Thank you and God bless. I say this as a free man worshipping God out of love and appreciation for all he has done for me, contrary to what I deserve.
@resurrectionauto6705 жыл бұрын
Thanks for the kind comment!
@jorgetamayo12547 жыл бұрын
Very helpful. Thank you.
@barkerjames19803 жыл бұрын
Love the idea for the improvised smoke machine! I am going to make one. I work on diesel pickups for a living,and have needed a smoke machine occasionally, but never could justify the price.
@resurrectionauto6703 жыл бұрын
That's great. Glad to help out!
@barkerjames19803 жыл бұрын
@@resurrectionauto670 I appreciate it, and God Bless!
@edwardfarmer42303 жыл бұрын
Great video. Thank you.
@davidtorres16969 ай бұрын
Lots of information Pastor not sure where to begin thanks for the mechanical wisdom God bless
@resurrectionauto6709 ай бұрын
Glad to lend a hand!
@joshtyson99123 жыл бұрын
This actually helped a lot thank you. I didn't have any carb and choke cleaner so I used wd40 and it worked fine for me
@jessewoodsonjames66698 жыл бұрын
THANK YOU,irecently purchased a 2000 ford ranger that was idling high,sure this will help,THANKS,ALAN W
@resurrectionauto6708 жыл бұрын
+alan white Glad it was helpful. I would start by cleaning the IAC first. It only take a couple of minutes and can only help. Best of luck to you.
@MrLike2surf5 жыл бұрын
Thank you pastor, for making this VERY informative video. It addresses my 2000 Ranger high idle. And, as a believer, I like it even more. I will be going to see your other videos.
@resurrectionauto6705 жыл бұрын
Thanks for the comment Jim. Glad to be helpful!
@JBlake-moon-shdo Жыл бұрын
I know this is way out if date. I really just want people to know that the device that he referred to as the throttle position sensor is actually the DPFE which controls the EGR valve. The throttle position sensor is located opposite the side of the throttle body as the throttle cable.
@charliepatterson93212 жыл бұрын
Dang . My 02 edge 3.0 v6 is not set up like this . The problem with that is this is the best explained video regarding a high idle on cold start only issue. I've changed all sensors and ran out of money for the pcv value. I must say it's quite possible the Teflon coating is gone . I did spray carb cleaner and found no leak . I do like your smoke machine. I did mess up and turn the screw . Put it back by bring the clean threads to the edge of the dirt . Do a video on an 02 edge lol 3.0 v6 auto . It doesn't mean to be a sinner , it's trying to follow the right path yet it's difficult living on the edge 😆
@johnolsson41593 жыл бұрын
Very informative video well done. Thank you.
@resurrectionauto6703 жыл бұрын
Thanks man!
@donaldp75205 жыл бұрын
Well done young man.
@papakluge72 жыл бұрын
Great video thank you
@MyTaylorb5 жыл бұрын
Great video. My 2003 Mazda B3000 RPMs go to 3000 when I change gears and when I first crank it up.
@resurrectionauto6705 жыл бұрын
Glad it was helpfulful!
@outfittersexpress3 жыл бұрын
This was a great video, very informative. I would like to ask that on your next video, if you do one, that you show how to test each component to prove if it is bad or not, before they chase parts. Titus 2:7-8
@sillygirl31307 жыл бұрын
pretty engine. nice and clean
@1800cc-Dead-Meat6 жыл бұрын
reason, you "Silly Girl" is because he is a clergyman and probably lives in a house provided by his Church, maybe very close by. IF he worked a REAL job like the rest of us his Engine would reflect that .... LOL
@sauljapuntich5 жыл бұрын
Yknow...there are plenty of pastors who work "real jobs" alongside pastoring. And a parsonage is a thing of the past. Maybe he likes maintaining what he owns. Anyone who cherishes a vehicle will tend to do that.
@jst31n4 жыл бұрын
Carburator cleaner is safe to test for vacuum leaks as long as its done shortly after starting a cold engine. Spray it on hot exhaust manifold and you'll probably have a fire.
@speedysteve91216 жыл бұрын
Very helpful. Thanks, pastor. Christ is in our midst!
@resurrectionauto6706 жыл бұрын
Speedy Steve Glad to be helpful!
@elricond.l.f16704 ай бұрын
Great video thankyou for that🙏🏽. Im not sure if you have stumbled onto this problem but, i have a 99 ranger 2.5l. Cleaned the throttle body, changed the idle control valve, air charge temperature sensor, filter and now my truck accelerates when i turn it on for like 5 seconds then idles normal, then i start to drive, as im coming to a stop, i put it on neutral (its stick shift truck) to slowly stop, but it keeps sounding like the motor is accelerating for like 5 seconds as well. And as soon as i come to a complete stop, it idles normal. Its concerning to me because it didnt do that before i did all that i did to it. Thanks in advance for your time!!
@superdeluxeeeАй бұрын
Thank you 🙏🏼
@turdfurgeson1643 Жыл бұрын
Vacuum leaks are evil, that smoking cigar trick is genius.
@Scolio6 жыл бұрын
I had an 86 crown victoria as my last car and its idle would dip and come back constantly, surging if you will and all of the lights would dim with the idle. I changed the IAC and it ran like a dream after that
@encryptorEJ5 жыл бұрын
I wonder what the 2 thin coolant hoses stemmed off the main lines (to heater core) are going to? Mine just wrap around the PCV Valve, which I don’t think is necessary.
@light24bulbs3 жыл бұрын
Gosh this is a good well thought out video. My ranger 99 only idle's high when it's rolling and that goes to a good idle once it comes to complete stop. Apparently this is to make shifting easier while you're driving around but it's so high that it cant engine brake at all and it's just not good. Can you recommend which of these things to check first for that problem? Nevermind it's a vacuum leak for sure! My vents only EVER blow out of the defrost. So that's it for sure
@m.c.582 жыл бұрын
Damn man, what do you use to clean up your engine and make it look so clean? Great video btw.
@kerrymercer49775 ай бұрын
Hi just found your channel. Got a question, I have a 1995 ford explorer 4.0. When I connect the plug to the AIC the idle increases to 2000 2500. disconnect the AIC and the idle drops back. I have replaced the AIC but still the same problem. Have not checked for a vacuum leak but I don't think that's the issue as all vacuum controlled devices seem to work fine. BTW love your channel, you are very good at explaining things. Got any thoughts or suggestions would love to hear them. Thanks
@scotthummel42484 жыл бұрын
Ok, good info. If you have a vacuum leak, you should get a P0171-P0172 code bank one and bank 2. Which the maf sensor will cause as well. (4 cyl will just be P0171) but gotta love that homemade smoke machine! Did your ranger throw a code for the dpfe switch?? You would think it would for egr valve issue. Also, with my ranger i have found that aftermarket parts dont carry the same values as OEM so if it is available, i would use the motorcraft brand. Just saying. God Bless you sir for the informative video! Maybe one day you and I should do a collaboration video! SCOTT THE CAR GUY
@lenadial46785 жыл бұрын
Hi God bless u. We have a 1989 Ford Ranger 3.25, we are having a problem with a high idle. Any help is appreciated.
@michaelpennington818610 ай бұрын
Did a great job explaining
@resurrectionauto6709 ай бұрын
Glad to lend a hand!
@robertprudhomme9298 Жыл бұрын
That was the best video on car repair I have ever watched. Thank you. As soon as the parts store opens this morning I'm going down to buy the analyzer you spoke of. Just curious, how would a plugged air filter affect the idle on my 2003 Ranger V6? Praise the Lord
@resurrectionauto670 Жыл бұрын
Glad to lend a hand
@robertprudhomme9298 Жыл бұрын
Well I went to the auto shop this morning to purchase a can of MAP cleaner, as you recommended. On a whim, I purchased an air filter as well. I bought this truck used a while back and, when I got to figuring, realized "a while" equated to over 3 years. Funny how time speeds up when you get older. Anyways, I've never changed the air filter and, considering how many dusty roads I drove on this summer, I realized a new filter was long overdue. To make a long story short, I changed the filter as soon as I got home ( took a while for the dust cloud from the old filter to settle) and planned to clean the MAP later today when I got home. Imagine my delight when I fired up the motor and, after a minute, its idle settled down at a nice 800 rpm instead of the 1100-1200 rpm it's been idling at for over a year. Thanks again!
@miguelalonso26034 жыл бұрын
hi Pastor, I have the exact same pickup as the one on this video, when I turn it on and is idle for 15 mins it kind of vibrates weird, not so bad and extreme, although not normal, may you guess what might be causing it?
@michaeljohn89054 жыл бұрын
I work on outboard engines and I’m we have to do link and sync s on the IAC,s and Throttle body’s and f they are not In sync you will have a bad idle. I’m guessing that a high idle would not be indicative of a high idle but I thought I’d ask about it. We used a connect so we could read the output of the IAC in milli volts. My question is there a manual written way to do this ? I’d imagine that my 4 stroke engine Yamaha would be similar. It was an older one similar to this trucks age. Anyway Im looking for a manual that will show me this operation any help would be greatly appreciated. Thanks. Ps My truck idles at 2000 and then it settles down but now after it settles down it will stall out. I haven’t done anything to the truck yet I’m just doing my homework. Thanks again. I appreciate you making this video.
@G-S-DАй бұрын
The anti diesel screw. Also the throttle plate spring can get weak, can cause an idle issue
@zero2blur7 ай бұрын
Hello. I picked up a 2000 Ford Ranger V6 3.0L with Idle around 1700rpm. Then I cleaned the MAF and bought a new IAC. Temp sensor on the intake doesn't seem to fit very well, that could be a problem. I have not checked the TPS. I removed the throttle body and cleaned it with air intake cleaner. The new IAC works better and idles about 1200 without AC on. When the AC is on, then it rises up to 1500 and won't go back down, even when the AC is turned off again. I touched the IDLE Adjustment screw. :O But I put it back like you showed. 4:15 ERG?... you mean EGR? I might need to replace that. What do you think?
@paulgarcia26253 жыл бұрын
I put a new tpm sensor and a iac sensor and took off my throttle body and cleaned it up and reset my computer by putting my battery cables together and it worked great for 2 days and now its back up to 1500 rpm..can it be my maf sensor I didn't replace yet?
@zacharyfunk2176 жыл бұрын
Where does it talk about setting your throttle body adjuster screw if it is not where it should be?
@flilguy2 жыл бұрын
@1:01 what is that tube next to the sensor? Mine is getting dry rotted and I am having issues with a very high idle when it is cold. I had the idle air controller replaced in the summer of 2020. It will go to almost 3000 rpm when it is cold for a few seconds. It does this when I first start it cold and never did it until now. It also only does it when it has been set for a few hours. This all started when the weather got below 25 F degrees. The AC and heater work well so the vacuum on that end is good. My Ranger is 21 years old and it's starting to nickel and dime me too much. In this economy it's that's $250 for this $500 for that. My brother-in-law is a mechanic and I still can't afford it even when cuts me a break.
@CR8VEАй бұрын
If you're idle air control was installed a quarter turn too much it'll actually want to hold your throttle body open a little bit also causing high idle.
@terryweekly45107 ай бұрын
It's not an ERG valve. It's an EGR valve . Emission Gas Recirculation valve.
@jeffanderson83844 жыл бұрын
Great video, Thanks. My truck revs when under load - going uphill or rapid acceleration and while it still pulls, it loses a majority of its pulling power. I will try to diagnose with these suggestions. If you have any other suggestions I'd appreciate hearing them. Thank you.
@resurrectionauto6704 жыл бұрын
Thanks for the comment. Best of luck with your repair
@bruceporter89785 жыл бұрын
Very good video
@resurrectionauto6705 жыл бұрын
Thanks Bruce. Glad it was helpful.
@2thewilderness5 жыл бұрын
What happened to the days when you could just turn an idle adjustment screw? If the idle is low, what do you recommend?
@resurrectionauto6705 жыл бұрын
Free America That is hard to say. I would begin by cleaning the IAC. .
@2thewilderness5 жыл бұрын
Will do, thanks.
@georgiastockton77105 жыл бұрын
2000fordrangerkeeps blowing fuse # 10 no air tail lights turn signal any sugestions
@ctbale1 Жыл бұрын
Power steering pressure switch stuck on will make it idle high. But not on the 4.0 because it doesn't have one
@351cleavland8 жыл бұрын
My high idle was coming from 2 places-after replacing my EGR Vacuum solenoid valve my idle lowered AND one of my exhaust manifold bolts had snapped thus causing an exhaust leak. The EGR solenoid was working but "lazy" as many sensors are want to do after years of service. Ford exhaust manifold bolts from the early 2000s are known to be of a poor quality, as are many of the Big 3 manufacturers. They can and do often break through the heating and cooling of normal engine operation.
@resurrectionauto6708 жыл бұрын
Thanks for the comment and good information.
@djmajiktuch826 жыл бұрын
Hey thanx for all the info on high idling but my ptoblem is when my ac is on i get high idling. Normally with no ac on it idles at 780 790 rpms but once the ac is introduced it kicks up a little but as I accelerate it kicks up to 1500 rpms and stays that way. Any idea why it does that? Thnx.
@mcfriedchicken19726 жыл бұрын
juan's Dawon have you figured it out yet?
@ckreitlein7 жыл бұрын
Mr Garner, My 1996 Ford RANGER 4.0 LITER ENGINE starts up, idles fine, then the idle slows and all is well. As I drive and the engine warms up, the rpm speed starts to increase on its own, up to perhaps 2500 rpms - really racing. I have to apply the brake to go slower. If I shut off the engine, it will not re-start....something that has never happened before... it always started easily. Do you have any idea what my problem might be? Thank you.
@resurrectionauto6707 жыл бұрын
Chris. Great question. Honestly, I'm not sure. I would buy the OBD II reader I mention and look at the telemetry of the engine. It seems toe me that the computer is getting false information from a senor. I'm sorry I can't be of more help!
@ckreitlein7 жыл бұрын
Westley, I have the obd reader, but it is not giving me much to go on....lean mixture and stuff.(p0340, and P0171) Not identifying a bad sensor....However, just a while ago I took off the whole MAF housing/sensor with the other wires and guess what.....started the engine and it ran fine for a long time....restarted each time at the right rpm, etc. never sped up. So tomorrow I am going to buy a new MAF and hopefully that will solve my problem...will let you know....thx Chris
@resurrectionauto6707 жыл бұрын
Thanks for the update. I look forward to hearing if that fixes it.
@ckreitlein7 жыл бұрын
Wesley, My truck is running very well now...not perfect, but much better than it has in two years. I changed the MAF and that made a big improvement, but the truck continued to refuse to start when warm. I then changed the crankshaft position sensor on the bottom from of the engine, by the flywheel pulley - in part because it was easy to get to, and finally I changed the idle air control sensor on top of the engine. All of that seems to have done the truck. It idles great, better than in two years, and it starts up perfectly every time. I still get a code p-0340 which is the camshaft position sensor, and I would change that too, but it is too difficult to get to...I would have to pay to have it done....must remove the intake manifold I think to change it, and that is more than I want to do. At any rate, I drove the truck all over yesterday, stopping a lot, etc and it ran great. Just thought I would let you know in case other's had questions.
@resurrectionauto6707 жыл бұрын
Chris Kreitlein Fantastic. Glad it's running better. Good job on the repair!
@michaeljohn89054 жыл бұрын
Man this was a good video. God is good.
@resurrectionauto6704 жыл бұрын
Thanks for your comment. Glad to be helpful!
@johnpatmos17223 жыл бұрын
Thank you. Clear explanations. Comprehensive. Jesus is Lord!
@mcfriedchicken19726 жыл бұрын
I have a 02 Ranger 3.0L that sometimes has a high idle only after I drive and put it in Park. I have to restart the truck for it to reset the RPMs to normal. Also, not sure if related or another problem, but it has a small vibration on start up, almost like a misfire. It's not a constant vibration like a bad motor mount will give you. I have changed plugs, wires, ignition coil, fuel filter, air filter, PCV valve and have cleaned throttle body, IAC valve and MAF sensor. Still shakes. No CEL. Any ideas what I could be dealing with?
@bryandunn48862 жыл бұрын
I know this is old, but did you ever find that problem out, mine does exactly the same, replaced about the same also
@mcfriedchicken19722 жыл бұрын
@@bryandunn4886 if you’re referring to the high idle in park then no, unfortunately. The problem is very rare that it’s impossible to diagnose so I just learned to live with it. The other issue came from an exhaust leak in the manifold gasket.
@bryandunn48862 жыл бұрын
Yes the high idle, other day I cleaned the iac even that it ain't that old, then i sprayed a little bit of seafoam intake and valve cleaner in the little vacuum hose that runs to the canister on the left side facing the engine, been 3 days with out it doing it,don't know if it lubricated something, or loosen some gunk loose, but also has not got back in the 90+ degree weather, maybe something to try , I'll see if I can get back here in a few weeks with update
@ScoundrullonYouTube10 ай бұрын
I'm a little late to the party since this video is 7 years old but I have a 1996 Ford Ranger XL and I just replaced the IAC valve but now as I'm driving if I let my foot completely off of the accelerator I noticed that the car does not decelerate it remains at the same speed for about 4 seconds and then it lets off, I did not have that problem before I swapped the IAC so is there any explanation to that? Anything I can try that I haven't tried already?
@Imhim90710 ай бұрын
Is it still doing it because usually after you replace it it takes a couple drives for the trucks computer to start working with it and learn how to do it right again because it was used to a faulty iac
@DJMoore-0016 жыл бұрын
Can you tell me what the idle speed should be after all this?
@resurrectionauto6706 жыл бұрын
D.J. Moore Good question DJ. I would think a good idle speed would be around 800 rpm
@DylanC8284 жыл бұрын
Sir, if you could answer my question it would be amazing. I have a 99 3.0 4wd, that idles at 2k unless I unplug the iac, then it quiets down to normal. I have replaced the iac and it hasn't made a difference. What could cause this problem? Did I get a faulty iac or is something else wrong? Thanks
@resurrectionauto6704 жыл бұрын
Good question Dylan. I suspect you have a vaccum leak somewhere on truck. Best of luck with you repair.
@troymays63004 жыл бұрын
U have to reset the idle speed on iac to do this codes have to be cleared an the u turn key on for several minutes without the motor started n then off n then start motor that's so it knows where the iac's position
@stephenbeasley99134 жыл бұрын
At 4:15 you called the EGR an ERG. It's an Exhaust Gas Recirculator.
@L8NiteCoffeeSips Жыл бұрын
When you attach the hose to the intake, do you have the vehicle on?
@joebird1400 Жыл бұрын
Lol...yes
@notgray884 жыл бұрын
amen bro
@ddk53274 жыл бұрын
Thank you for this video if you cleaned your throttle body with throttle body cleaner and it started to idle high how do u coat the throttle plate again ? Please help !!
@resurrectionauto6704 жыл бұрын
Good question Devin. I wouldn't worry too much about using throttle body cleaner. It's more likely that you have an issue with the IAC or a vacuum leak.
@ddk53274 жыл бұрын
Resurrection Auto thank you !
@martystevens39696 жыл бұрын
A bad CTS can cause high idle. Warm the engine first. Check the oil and radiator first. After replacing parts, recheck the codes.
@resurrectionauto6706 жыл бұрын
Marty Stevens Thanks for the post Marty. What is a CTS?
@martystevens39696 жыл бұрын
Resurrection Auto Coolant Temperature Sensor. If your CTS is acting up, it can cause the engine to run rich or idle too high. They go bad slowly and gradually causing your car to use gas. A Actron CP9690 code tester tests live, graphing, smog readiness test, record, oil light turn off, and MORE! It has cables for OBDI for Ford G.M., Chrysler and 2 Toyota. It has a cable for OBDII. It has a cigarette lighter cable. It comes in a black pouch with instructions. You can get a battery adapter to hook up to the cigarette lighter from EBAY. It can check sensors with the engine off like MAF, IAC valve, EGR open percent, RPM'S, oil pressure, coolent temperature, fuel pressure, vacuum, oxygen sensor voltages, charging system voltages, etc. The Snap-on Vantage does a whole lot more! It can show wiring diagrams of sensors, check ignition voltages, It can check codes. It's better than a code tester to REALLY find out what's wrong with a car. It's advanced for a beginner. It'll show tune-up specs. It'll show your plug firing voltages and can easily pick out a bad cylinder. The spike will be high or too low. It's a All-in-one IF you understand the readings. I would've bought one instead of my Actron CP9690! The cost is a little bit higher. EBAY has it.
@resurrectionauto6706 жыл бұрын
Marty Stevens Thanks for that information! I didn't know that.
@TheDeadbirdy6 жыл бұрын
How about "CRC Throttle Body Cleaner"?
@Niafi114 жыл бұрын
I have High Idle on mine, and throttle Sticking, but the o2 Sensors are smoking.
@MrWd25285 жыл бұрын
I have a 98 2.5 ranger with no A/C and idles around 1000 rpm. Could the mere fact that i do not have A/C cause the idle to be where it's at? Thanks.
@resurrectionauto6705 жыл бұрын
Good question. No I don't think that would cause the high idle.
@ericclaption49593 жыл бұрын
The first alright you got a engine almost as clean as mine
@mbrian19727 жыл бұрын
I have a 1998 ford ranger 4×4 with a high idle I fixed some of the vaccuum hoses that was bad still didn't fix the idle, I'm not getting any air blowing out of the front vents at all the air only blows out of the defrost could there be a vacuum leak under the dash or could the no air coming from the front vents be a blend door motor problem
@resurrectionauto6707 жыл бұрын
Great question Brian. It's almost certain you have a substantial vacuum leak. If you purchase the OBD11 reader, you can actually read the vacuum pressure on your phone That will confirm the problem. The smoke test may be the best way to actually find the leak.
@mbrian19727 жыл бұрын
Wesley Garner I had a mechanic think it might be the idle control valve the high idle is only at start up then after it runs for a minute the rpms settle down, what is the link to order the ob2 scanner
@resurrectionauto6707 жыл бұрын
I purchased one similar to this. www.amazon.com/gp/aw/d/B011NSX27A/ref=mp_s_a_1_10?ie=UTF8&qid=1481240114&sr=8-10&pi=AC_SX236_SY340_FMwebp_QL65&keywords=obd2+scanner
@djmajiktuch826 жыл бұрын
8 ball I had the same issue with my 2001 ford ranger 3.0 truck come to find out it was a small hose (on mine it was cut I have no idea why) that is connected to a black,softball size ball that's attached to the fender. That ball should have two vacuum lines comming out of it. one line should go straight into the fire wall and the other should be attached to a vacuum line supplying vacuum. These lines are very thin and made out of plastic and can become brittle in time.
@dodgeplow3 жыл бұрын
@@djmajiktuch82 The "softball" is the vacuum reservoir.
@danielwhite4825 Жыл бұрын
The ERG? I think you meant the EGR valve there....yeah I think I'll just move on to the next video
@jamesshaw49544 жыл бұрын
I had the same problem it was the idel air solenoid
@barrybrandonio4183 жыл бұрын
The temperature sending unit to the computer can cause a high idle too
@resurrectionauto6703 жыл бұрын
Good comment! Thank you
@raym25038 жыл бұрын
Mine does all that but only when I'm driving an changing gear , but when I come to a complete stop the idle goes back to normal . Any help is highly appreciated
@raym25038 жыл бұрын
Its almost if I had the cruise control in gauged when In gear . But as soon as I press the clutch the idle goes sky high . Its getting annoying cause people think I'm trying to race them lol
@resurrectionauto6708 жыл бұрын
I did some research on your symptoms and found that a service bulletin was posted by Ford concerning this issue. Apparently some models may have a faulty connection at the throttle position sensor. See this forum for more information: www.therangerstation.com/forums/showthread.php?t=53507 Purchasing the OBDII reader would also help as you could read the TPS. Hope that helps!
@raym25038 жыл бұрын
thanks Wesley
@user-hh4hc2lt6e6 жыл бұрын
Ray M - hi, did u find out what it was? My 2000 ranger has the same exact problem u just described. Trying to fix this before selling it. Any help is appreciated, thank you
@UpcomingJedi6 жыл бұрын
Driving A truck is the higest form of existence bar none even if one prays to a rock.b
@MegaCyberleader5 жыл бұрын
more important things thant trucks n idls. God, I love this guy hahahaha.
@woxwell36843 жыл бұрын
What could cause a 3 minute high idle after start up, summer or winter, everytime a warm engine sits for 10 minutes on a 2007 ford ranger 3 litre v6. Once it drops to normal, around 750 rpm, it stays there. It is only at start up is does this. Scan tool shows nothing.
@resurrectionauto6703 жыл бұрын
That's a great question. It's not a vacuum leak. I would check the Throttle body sensor and MAFsensor
@aranzamendez20152 жыл бұрын
Thanks. God bless.
@ctkelley187 жыл бұрын
Is this the same for 2005 ford ranger edge?
@resurrectionauto6707 жыл бұрын
Caleb Kelley Good question Caleb. The Ranger was virtually unchanged from 1995 to 2011. Most of the info in this video should be valid for your model.
@ctkelley187 жыл бұрын
Awesome thank you, I'll give it a shot!
@Heavyhearted442 ай бұрын
When I push clutch in I get high rev rpm about 3500 rpms
@johnjacobjinglehimerschmid3555 Жыл бұрын
What should the rpm's be? I'm constantly at 1100 to 1300 rpms.. Warm or cold.
@ctbale1 Жыл бұрын
650-700 ish
@johnjacobjinglehimerschmid3555 Жыл бұрын
@@ctbale1 Guess it's off to the garage to check my setpoint. Frack why can't it still be a simple turn of a screw on the carb.
@ctbale1 Жыл бұрын
@@johnjacobjinglehimerschmid3555 yea, been trying to get mine down to normal for years. Its at 950. I've tried everything except for pulling the intake manifold off. I would just ignore it except for I have harsh down shifts because the torque converter stays locked up and I'm hammering on my transmission.
@johnjacobjinglehimerschmid3555 Жыл бұрын
@@ctbale1 Yeah bought my ranger last 6 months. 122k on it and soon as I got it felt the hard shifting up / down ... One garage said meh .... it's normal for trucks. Got a stuck torgque converter clutch stuck and had the transmission and converter rebuilt /replaced. Still shifts hard, imo. Reverse I can hear it bang on the rear diff or it's. Driving my shifting is meh to ok. Sometimes it hits hard those seem to happen if I accelerate and then ease up right at a shift point .... then she hits hard. To say the least I'm so not happy with this truck. My 2nd foray into Ford land in 55 years. I'm sad I stepped out of my anti ford box.
@robertblunt95176 жыл бұрын
I have a 95 Ford Explorer 4.0 it don't do it all the time but every once in awhile you get in it try to crank it and it don't want I don't it goes that goes dead it's only happened to me twice since I got the truck about 8 months ago but I had to just wait and keep messing with it and then finally catch up with his self and run
@robertblunt95176 жыл бұрын
It has a pretty good high idle when it's just sitting
@austinjohnson2655 жыл бұрын
Do you have to have it running to check codes?
@resurrectionauto6705 жыл бұрын
No. But the key has to be on the run position
@austinjohnson2655 жыл бұрын
@@resurrectionauto670 thank you. I ordered a good scanner to use not only on mine but others too
@deaconwhitson13 жыл бұрын
LOVE the first comment!
@bigsparky88884 жыл бұрын
ERG...AHEM...EGR(Exhaust Gas Recirculator) freudian slip...is ok...
@bootyman2343 жыл бұрын
I know right? lol I had to see if anyone else was annoyed enough to say anything about it before I did =)
@dariendudley97163 жыл бұрын
I unhooked the IAC until I can get replacement seems to run ok better than pulling up to light pushing in clutch and engine idling 6000 rpms minutes plug it in wow 100 miles a hr. Mind these truck are nothing but junk to me
@tuffyseger28315 жыл бұрын
ahh how do u get to church if your truck wont start yeah im upset cant get to to church
@bigsparky88884 жыл бұрын
Bummer...ask 4 a ride...eh???
@gtenthusiast985 жыл бұрын
When I start up my ford ranger it has an AIRY SOUND and so when I speed up and shift the air sound is gone, btw it’s an automatic it sounds like a diesel when it’s not, only happens when I’m driving slow Why is there an airy sound? And how do I fix it? Note: it’s at 206,000 miles😂
@resurrectionauto6705 жыл бұрын
It's hard to know without being there. You might first check for vacuum leaks. Best of luck with your repair!
@gtenthusiast985 жыл бұрын
Resurrection Auto thx man I appreciate it
@SimmoneOrganWorks5 жыл бұрын
@@gtenthusiast98 It could simply just be your fan. On my Ranger (3.0) its the same way, sounds like a diesel on startup and revving/accelerating below 2500rpm when cold. Does it get any quieter when the engine is at operating temperature?
@gtenthusiast985 жыл бұрын
Zacoon it does get quieter at normal temp, thx for your help man
@jimh62036 жыл бұрын
Just bought a 2006 ranger from a christian pastor. He boasted about the new spray bedliner he just had installed 1 month before. And how he had them spray it extra thick. 3 weeks after buying it, needed to change the third brake light bulb. Bed felt extremely spongy when I climbed in. Turns out his extra thick bed liner was to hide the fact the floor was rusted out. After further checking, found numerous things that he doctored up to get it to sell. Now I have a spotless dent free super low mile pile of junk.
@resurrectionauto6706 жыл бұрын
Jim, I so sorry for your experience! That is just terrible. Please let me know if I can be helpful with any of your repairs.
@scottfreeman7275 жыл бұрын
Hello jim h-if you ever find a PERFECT Christian-all of HIS - hungers and thirsts for the righteousness that we'll know only when we step into HIS eternity-
@kenberscheit4804 жыл бұрын
now we know what makes vehicles "smoke" they have a nicotine habit , so simply find the cigar and remove it to stop your car from smoking???? its an EGR valve as in Exhaust Gas Recirculation valve and it cuts emissions and helps the engine warm up
@garrybailey793910 ай бұрын
Thanks for your video very interesting on the car part. P.S. Trinity came from Babylon! Hosea 13:4/ Isaiah 45:22/ Exodus 20:3
@todddyke46934 жыл бұрын
Transmission problems with rangers
@pokey9999913 жыл бұрын
EGR , not ERG valve! D A!
@ronaldcannatella10792 жыл бұрын
I’m a born again Christian too with a 99 ranger xlt. God Bless you sir
@resurrectionauto6702 жыл бұрын
Great to hear!
@noshynosh3249 Жыл бұрын
So clear an explanation but I can't take that squealing in the background. I'm out.
@chrisdavis78835 жыл бұрын
egr not erg
@resurrectionauto6705 жыл бұрын
Thanks for the correction.
@chrisdavis78835 жыл бұрын
@@resurrectionauto670 no problem brother
@bootyman2345 жыл бұрын
Amazing how you can be so pragmatic with a vehicle yet so emotion driven with your belief system. Jesus may not ACTUALLY have existed!
@resurrectionauto6705 жыл бұрын
Thanks for stopping by my channel Anthony. And thank you for the comment. Your objection is answered well in this article by Dr William Lane Craig. You might check it out sometime. www.reasonablefaith.org/writings/popular-writings/jesus-of-nazareth/the-evidence-for-jesus/ Nonetheless, Best of luck with your repair!
@johnsaunders48366 жыл бұрын
Great video but I have to say so you mean to tell me you can only be saved and enter the kingdom of God through Jesus by acknowledging Jesus you have indigenous people all around the world that has never heard of Jesus Christ so you mean to tell me they’re going to hell help me figure that one out I believe everyone is saved already if you want to call it that
@resurrectionauto6706 жыл бұрын
John Saunders John, thanks for the comment and great question. I won't prent like I have all the answers but historically Christians have responded to that question in a couple of different ways. You might check out the work of William Lane Craig on his website Reasonable Faith. Either way I hope the automotive portion of the video was helpful.
@theoptimist78077 жыл бұрын
you dont need religion just understanding and treat people with love i dont need a god to teach me to love another human. i love myself and all human life but i will never worship as i was created a free man not a slave . if thier is a god that would punish me for not worshiping him instead of seeing that i am a loving human spirit than i rather suffer for what i believe than being forced to do something i do not believe..
@halfstep677 жыл бұрын
You won't find no greater love than Jesus willingly sacrificing His life for you so that you may inherit eternal life, You were born a slave to sin, sold under bondage.. Only through Jesus Christ can you find freedom. God is not going to punish you, you are willingly rejecting His FREE gift of eternal life. Your punishment is self inflective. God has never sent anyone to hell, people go to hell because they choose to. Your self-dependent good deeds is not satisfactory. But trusting in the finished work of the cross is satisfactory. Jesus did the work for you since you are incapable of doing it yourself. Trusting and believing in the death, burial and resurrection of Jesus Christ according to the scriptures is what is required to actually be saved and have real freedom.
@resurrectionauto6706 жыл бұрын
Thanks for the comment. You raise a number of good questions about Christianity and I do respect you position. CS Lewis addressed some of these concerns long ago in a piece entitled "Man or Rabbit?" Here is a link to a KZfaq reading kzfaq.info/get/bejne/jp-WhZSnuN6ydYU.html Perhaps you will find it helpful. Either way, I hope you were able to get you vehicle repaired.
@charlesspangler42866 жыл бұрын
I thought I was living a good life and I tried to like and love everyone around me. But then I met Jesus and everything changed. I cannot explain how much happier I am today than I ever was before. I now know what true love really is. Jesus love me enough to give his life in order that I may be saved and have eternal life. And talk about loving my fellow man I have never felt like this before. It is wonderful. Everyone should at least give it a try and I can tell you right now your life will totally change. John 3:16
@basanistes3596 жыл бұрын
The burden of proof is on you. No proof of god has ever been given.
@resurrectionauto6706 жыл бұрын
Thanks for the comment. There are several reasons to believe God exist including the cosmological argument, the moral argument, the teleological agrument and the ontological agrument. William Lane Craig has done a nice job articulating each of them. You might check out his website Reasonable Faith. Hope you were able to get your truck fixed.