A simple video demonstrating the replacement of the Rear wheel bearing on a 2004 Honda Civic Si, otherwise known as the EP3. This video is merely a demonstration rather then a full blown DIY.
Пікірлер: 29
@chinmonmon7 жыл бұрын
when you said you where going to rush this, I was thinking it was going to be scotty kilmer fast; but this video was really good and helped me with step by step help.
@pellergin2 жыл бұрын
Best video on how to do this, for those that live on salted roads.
@danielyesluh11394 жыл бұрын
Dont be disappointed with your video it was very informational and had good camera angle that's an easy job shows me what I'm up against mine are humming also! But at 309,000 miles I cant complain!
@hairygreasemonkeys.37837 жыл бұрын
thnx. ur vid gave me good info of wat i have to do on my ep3.
@2005ep3si8 жыл бұрын
pretty good job with the video Brian. only thing id say is to use antiseize or grease so things dont rust together so easily. but thats my opinion
@MP7A1pdw3 жыл бұрын
Dude great video way more detailed then any of the others.
@SoCresentFrestey6 жыл бұрын
Great video. I have the same hum at speed and I'm about to tackle this task. Thank you for posting.
@manuelramos46082 жыл бұрын
So I need to take out my whole shoe brakes & springs to be able to pry out the stuck bearing???
@southernstar43537 жыл бұрын
mechanic friend of mine says they put those screws in the rotor during construction at the factory. to keep the rotor on and stable while its moved up and down the assemly line. who knows, it sounds good.
@bseries88263 жыл бұрын
Hopefully when I do mines this weekend it'll be just as smooth as this video 😁
@blake4u25 жыл бұрын
Brother your NUTS! This was a great video! You helped a tonne! Thanks! Blake
@mohdfaharuddin35648 жыл бұрын
very clear video explaination..good job..
@motoryzen2 жыл бұрын
5:25. music was pretty loud there..I couldn't understand you well. But thank you much for the video . I'm curious if the front is exactly the same AND would I need a torch to heat that sucker up to get it off.
@Glenn77193 жыл бұрын
Gotta do mine soon, its been humming for months now. No play in the wheel and only makes a noise when going over 40mph, i am guessing its dried out. Not 100% sure which side it is, sounds like drivers side. Will get someone in the back leaning into the boot just to make sure.
@benghazi42163 жыл бұрын
Just a thought, why not just leave the brake caliper on the disc and lift it off together? I feel you safe like 10 small steps then, including pumping the brakes after which can be dangerous to forget. Never changed a wheel bearing, but I will try it next week when the parts arrive
@thaik565 жыл бұрын
Thank you for this video! Hopefully I won't need a gear puller and a blow torch!
@dannysautorepair3 жыл бұрын
Great video sir, thank you
@marcopolo71634 жыл бұрын
On my rsx the hub was really rusty and I cleaned it the best I can but the bearing was still really tight going on, used a 32 impact socket and a hammer to tap it on in place, will that cause my bearing to go out?
@screwdajuice2 жыл бұрын
nice job putting music over your voice
@fitbike3956 жыл бұрын
Great job on the video
@gnzlz53734 жыл бұрын
Is this similar to the rears on an acura rsx 2006 type s ??
@MTLJack7 жыл бұрын
Hi, is it the exactly same thing for 4 lugs SiR hatch? thanks
@thaik565 жыл бұрын
Shouldn't be that different.
@olooshun44615 жыл бұрын
can i put this in a 2002 civic lx? i want 5 lugs
@mr.droppinhertz65773 жыл бұрын
Whats the song used at 6min?
@Bovize5 жыл бұрын
Wheel bearing grease?
@bhadz1004 жыл бұрын
What is the nut size of the axle?
@jamesmoua72297 жыл бұрын
what brand did you purchase and how is the performance? thanks
@modifierle7 жыл бұрын
James Moua it is a Timken brand bearing and almost 10k later it is quiet and performs nicely.