Paul Roberts 😆😂.... you seem to be the lucky ones then .... jokes aside it’s been pissing non stop and I know exactly what you mean

Greetings 🍻🍻🍻

I'm a heavy equipment and farm equipment mechanic

It was a heavy old girl that box ., you definitely know your stuff. .,, ✨🍻🍻🍻

thank you 🍻🍻🍻.,, nice time hear from someone that’s actually done this before.

​@@WMCS This is what awaits me, only a Mazda engine, a diesel.

Alexandru Budescu thanks a lot for your review. Much appreciated you have a great day as well

What is the DMF and when in the video do we see it? Cheers.

carles Girona it was a heavy box.... this one wasn’t for the faint hearted.

Daniel Robinson thanks a lot as always for the continued input on the channel ... It was a heavy box ... and the cold day really added to it all. But it ended nicely.

It’s fairly straight forward.., gearbox a bit heavy tho .. maybe an extra pair of hand .. bug hello to Kenya 🇰🇪...

Denis Muriithi no problem my friend .., ✨✨

Thank you!

The main thing is you managed it. Bet it save you a good £900.,,

@@WMCS ha ha.. not sure how much I saved, but I did get a nice new compressor, impact gun, insane amount torque wrench.... Just can't get over you bench pressing the IRD, makes me laugh thinking about it...

Thanks JJ ., I’m sure that day will come 🍻🍻🎄

colintx800 thanks for your support as always.

The box a bit heavy too. But a nice laid out repair tho.

Hope that’s a positive message you’re sending out 😁

Multifunction KÁ Tech thanks for the support on the channel

Mi G 😁😆 oh it’s great and I don’t have to wait in line to have a go on the bench press.

125 SM it was a heavy box. But that cold morning was probably worst than the job itself 😁

Thanks for the review .., it’s not all that bad tho 🤩

About 4-5hrs

Takes ages. Sometimes two days ..lol.

Hi Tim..,, hope it all goes well for you .., one thing to watch out for as well is any air lock in the line will cause the CSC to fail prematurely

@@WMCS cheers mate, what will be the best way to bleed it through

Garry Nutter thanks for that feedback. It was a fairly cold morning... but a great repair. Appreciate the support.

Robert definitely yes. Otherwise you’ll most likely get the dreaded DMF rattle soon after. Especially with the new pressure plate fitted on it.

ghost meister thanks ... appreciate that

seyed rozbeh siros I think i do it more because I enjoy the adrenaline of the job. Believe it or not it’s a real buzz for me tackling these clutches on my own ... especially if the weather is quite stormy ... really adds to the scenery. Thanks always for your positive review

@@WMCS I love your work and by looking at your movies I have repaired my own disk and page 206 and thank you for making these videos available to people💝💝Sorry what country are you from I am from Iran

seyed rozbeh siros appreciate you sharing your experience on the channel forum. Glad to hear the video came through ok for you. We are based in the UK..

Hellooo🍻

Hi Mike. A big thankyou for the membership. You can email me or WhatsApp I can walk you through any point you’re not sure about. 07376369067 Send me a photo of the underside where you’re not sure and we can pick it up from there.

Abis Ismael thanks for your input. Unfortunately I’m not a torque wrench, tape measure and pencil behind the ear mechanic ... but whoever does a repair and feels the need to use torque wrench I highly recommend it ....😁

It states 15 duger dugers on the gun in the manual. I counted 15.1 so spot on.

Roughly about £800...

@@WMCS 5hrs work at least. Well done. You should start to train some young blood up to take over, but help with the heavy lifting as they learn.

Oscar Montero this job was the same as one of the previous... Only difference is one was made in the spring of last year nice and warm beautiful day ... this one has been filmed in 1• Celsius... notice how white the metal is from the cold ... fingers was a bit numb throughout the repair ... Good observation about the use of legs as at that point I’d pretty much lost sensation in all the fingers ... so could only feel the palm of my hand ... But with constant movement the body warms up and the hand is back to normal after about 2 hours .... New bolts came with the DMF, I don’t particularly have much use for a torque wrench purely because I know what I’m doing and can gauge how tight to go ... But for anyone that is unsure a torque wrench is highly recommended... That was quite a heavy box ... the trick is to carry on until it slots in otherwise time and strength are easily sapped .... Thanks a lot for your input and review of the channel.

@@WMCS Woah! 1 Celsius... Freezing cold! So, it was something different. Take care! Thanks again!

You should always use a torque wrench if unsure

🍻🍻✨✨

Malcolm Young thanks for your review and taking time to visit the channel

Send it my way. I’ll get it done for you.

offbeatwarble i always replace like for likes. These use AP from factory. In my opinion I wouldn’t say LUK is the best. But the most known brand. AP clutch are more superior. And never use and LUK in any vauxhall as the CSC are made of plastic. SACHS are great solid brand as well

V4 ************ always great to hear from you... your support is always welcome

@@WMCS time will tell....its not safe either imagine a gearbox slipping on your chest with no one around to help

www.williamsmobileclutch.co.uk

I think it’s because I’ve been doing it for several years now. So I’m confident enough

J.F I don’t think I have. What year did they come out.

They are all the same car all with a common gearbox issue for 1st and reverse the car was produced 2011 to present.

J.F I’ve done quite a bit of the newer ones. I have come across the a few gearbox issues with the end bearing collapsing ... does that sound about right.

marin khan thanks for your input on the forum. I think I can do that for the upcoming videos.

@@WMCS I really like your videos they r very informative , I'm a mobile mechanic and I fix cars by the side of the road as same as you do so if I know the time how long it take . it would help me greatly 👍

marin khan that’s great to hear from a fellow mobile mechanic .... I’ll definitely put in the link the hours. But feel free to message me if ever you require a repair time for any job. Where about’s are you based.

@@WMCS hi I'm based in tunbridge wells , kent . I've seen a lot of your high quality videos and to be honest with u , ur doing a very good job but a word of advice plz 🙂🙂 . when you replacing a gearbox please use engine Beam to lower and left up the gearbox the reason I'm saying that I've learned it the hard way , I have had few time that the gearbox drop on top of me 🤣🤣🤣 , and I'm pretty sure you had it as well 😀😉 . Keep the good work mate 👍👍👍👍

Martin Blackbird it does get like that sometimes 😆😁.... lots of wd40 .. seems to work like magic.