2002 to 2010 F350 Front Clip Swap

2002 to 2010 F350 Front Clip Swap | EASY DIY!

Рет қаралды 70,627

Күн бұрын

Today, I describe how exactly I got my 2008-2010 Front End Conversion done to my 2002 7.3 Powerstroke. Now the swap has been done for about a year already, but I never physically showed my viewers how I did it until this video. So that said, enjoy the video and hope it is a helpful guide to installing this front clip with no purchased kits or brackets, but as a 100% Do It Yourself project. Should help for the swap on your 99-07 Superdutys!
----------------------
PLEASE NOTE: I am not responsible for how you do you front clip swap on your truck. This video, while meant to be informative and helpful, is the way I DID IT, so I am not responsible for anyone else's conversions but my own, so use your discretion in doing so.
-----------------------
Go Check Out My Last Video On the Gauge Cluster Swap in My 7.3:
www.youtube.co....
-----------------------
If you're new to the channel, welcome!
Click HERE for my DASH SWAP videos:
www.youtube.co....
www.youtube.co....
www.youtube.co....
www.youtube.co....
------------------------
SUBSCRIBE to my channel to stay tuned on more updates of my build!
------------------------
Track: Royalty Free Music - No Copyright 100% FREE - Limitless - Trap Instrumental
www.youtube.co....
CopyrightFreeMusic Channel: www.youtube.co....
Track: FIFO - DOPE TRAP BEAT | No Copyright Trap BNB Prod.
www.youtube.co....

Пікірлер: 86

@leroyroutt4791 4 жыл бұрын

Love the 2008 to 2010 front end look. . HATE the crappie 6.4 engine that was under the hood. You have the best of both worlds!

@Jimmyziggy 4 жыл бұрын

Leroy Routt Couldn’t agree more, exactly my thinking!

@leroyroutt4791 4 жыл бұрын

@@Jimmyziggy 6 liter, good engine after you spend $9.000 dollars on bullet proofing / 6.4 lost cause / first Gen 6.7 liter had turbo issues and you have to pull off the cab to R &R the turbo / current Gen 6.7 is really strong and very reliable BUT if have issues, still it's off with the cab. I have friends that own 7.3 trucks and they run as good today as they did when they were new. . Now THAT'S BULLETPROOF. By the way, I also really, really like that 2010 dash in your truck, that looks super nice.

@robertpaulson208 4 жыл бұрын

@@leroyroutt4791 well said

@LightGesture Жыл бұрын

My 08 looks better than the 2010. Or i guess, the later model. 🤷🏾 i have a 115k mi 6.4 in hoping will still last me. He's been a reliable truck.......

@StrelkosChopShop 2 жыл бұрын

Definitley just saved me a ton of headache trying to figure this out, about to tackle this swap on my 02 CCLB dually, thank you! Next is the dash swap so ill be checking that video out as well.

@silentkashful Ай бұрын

No cutting the frame for the headlights? That's genius! Am i right?

@wrentypecyborg6965 Жыл бұрын

Unbelievable video maybe the best real diy tutorial ive ever watched

@Keen-dp3ri 4 жыл бұрын

Dope brother I have a 2000 Ford F-350 I love the 2010 front clip but Im going with the 05-06 front clip I have been looking for awhile now

@Jimmyziggy 4 жыл бұрын

Keen 1031 Thanks! I’m also a fan of the 05-07 front clip, it looks nice!

@user-ek9rv3df9n 3 жыл бұрын

Спасибо друг.Я как раз сейчас делаю такой же проект.Твоё видео очень мне помогло. Спасибо и удачи на дорогах!

@ryancollins3227 16 күн бұрын

Did you take any videos of your build brother?

@LuisGonzalez-th5fv Жыл бұрын

I have a 200f ford f450 and i still dont know what problems this engines have it has now 250 thousand miles and runs perfect. 6.4

@lilcruzn69 Жыл бұрын

Saving hundreds of dollars Thanks for sharing

@mancinas7.387 4 жыл бұрын

Thanks man really save alot of money

@Jimmyziggy 4 жыл бұрын

Edward Lopez183 You’re welcome

@chiefexecutive 3 жыл бұрын

Such a cool update!

@emnauelcruz8739 2 жыл бұрын

Best video I ever see my friend

@colten.fuston 4 жыл бұрын

You should do a repaint

@Jimmyziggy 4 жыл бұрын

One day.... got some more things to do first tho

@strokenobs___181 2 жыл бұрын

I got the bumper brackets off the 6.4 I got my bumper and brush guard from I’m thinking if you cut off the old 99-04 bumper bracket then notch the square frame the 2 inches you need you could bolt on the 6.4 bumper bracket onto the 99-04 frame I checked with my old tow hooks and the holes in the 6.4 bracket does line up with the holes on the 99-04 frame drilling a hole and bolting the bumper with no bracket did work for me but when I put the brush guard on it’s pretty flimsy so I’m driving to figure out a more sturdy way to do it I don’t think the mcnasty bumper bracket would help to sturdy it any either

@adarianlherisson4182 6 ай бұрын

Good job

@lilcruzn69 Жыл бұрын

I’d like to see the trimming of the front bumper

@danielcoleman9976 Жыл бұрын

Great job

@Dylan-yy2dl 4 жыл бұрын

Hey man, I'm doing the swap with no mcnasty kit. Doing washer spacers like you did. Is there a template I can print out somewhere for cutting where the headlights go? How did u know where to cut it?

@Jimmyziggy 4 жыл бұрын

Great question, for that part i used the mcnasty video and just eyed up where he cut and then got it close and then tested if my light fit in there. If it needed more i trimmed a little more until it was perfect

@keithnoneya 4 жыл бұрын

Thumbs up! I always wondered what it would take to do a front clip swap. Thanks for sharing. Best Wishes & Blessings. Keith Noneya

@brantphilcox9861 3 жыл бұрын

Hey did you use the 08 hood latches were it pivots and bolts to the cab? Or did you use your old ones

@ricardomaldonado2847 3 жыл бұрын

I do everything and work perfect in my truch tanks

@omarzowila 4 жыл бұрын

I have seen a 2000 Ford Excursion that has been converted into a 2010 Ford Excursion

@Jimmyziggy 4 жыл бұрын

Omar Zowila Yea the excursions are pretty neat!

@robertpaulson208 4 жыл бұрын

Great content sir

@Jimmyziggy 4 жыл бұрын

Robert Poulson Thank you!

@robertpaulson208 4 жыл бұрын

@@Jimmyziggy i just picked up a 99 f450 black snatch truck . looking to do an 08-10 conversion . so i will need hood fenders front bumper . hood latch wiper assembly . seen some parts trucks in my area i was thinking 1000$ for all those parts mabe 1500$ tops

@Jimmyziggy 4 жыл бұрын

Robert Poulson Sweet! That sounds awesome it’s gonna really good!

@Jluna369 2 жыл бұрын

Sweet Are you still have the other parts ?

@terrywatson6866 3 жыл бұрын

Did u cut the frame like mcnasty says to?? Can you show pics of where u cut the frame for the bumper?

@JR-gq2xr Жыл бұрын

Why exactly change anything with the wipers.?

@ryuuginseyia5247 Жыл бұрын

where do you get the body panles?

@mrchadwick40 2 жыл бұрын

Thanks man I see we think a lot a like

@KN_SBR89 2 жыл бұрын

How do you wire up the headlights to work? Is there someone that makes a wire harness adaptor from the original plug in?

@lucasdibenedetto1647 3 жыл бұрын

I thought I was the only one to lazy to do my brakes so I put a video grip on the line but he has one too on his driver side

@Jprittyboi 3 жыл бұрын

Iiiiiiic

@leroijr407 3 жыл бұрын

I did the same front end on my 06 f350 dually. When i release the hood lever in the truck, the hood does not pop. I have to have another person pull up on the hood as i hold the lever. The hood bar is latching on the latch straight also. Without the hood locking it, it releasing sounding hard and fast. Just with the weight of the hood, it is not strong enough to pop up. Any ideas??

@Jimmyziggy 3 жыл бұрын

Have you adjusted your hood stops? I had to screw my hood stops all the way out

@splashfrank4945 3 жыл бұрын

Can I get some pics?going to be doing it with a 04 dually

@ammoandy507 3 жыл бұрын

Do you have to do anything with the headlight wiring?

@TonightWeGrill 2 жыл бұрын

How much do the front clips usually go for?

@notcertified7920 2 жыл бұрын

Need a dash video

@JMRRebuilders 3 жыл бұрын

I imagine you sold the clip you have in the basement has been sold if not let me know. We are about to do the same thing. I noticed you dont have the hood pistons. Do you have a way to get them installed?

@Jimmyziggy 3 жыл бұрын

Yea i sold it. I didnt do hood pistons but at some point i want to fit the 08-10 ones in there

@sundbergkyle 4 жыл бұрын

Zachs kits are nuts. Better then that...

@abumuhammad40 3 жыл бұрын

Is ur truck 2wd or 4wd.wat lift do have

@usvcrescuecrew9563 3 жыл бұрын

How long did it take to do

@christophermapes3229 3 жыл бұрын

Notice you didn’t add the hood strut. Have you added it and what did you use?

@Jimmyziggy 3 жыл бұрын

I still never have. I plan to use the 08 one when i get to it haha. Have manually lifted it for these past two years so it’s a habit haha

@stryker0040 4 жыл бұрын

Hey bud, where are you located? I have an 02 as well and I’m looking for a front clip. I wasn’t planning on going newer than 07 but if you’re close I’d be interested in the burgundy clip.

@Jimmyziggy 4 жыл бұрын

Forrest Schell NJ. Burgundy clip is already long gone, but I have a white clip for sale now

@tomcase3269 4 жыл бұрын

How much for the white clip?

@angelsanchezmkiv 4 жыл бұрын

What size square tubing you use for the hood latch? And did you trim the headlight panel for the headlights to fit?

@Jimmyziggy 4 жыл бұрын

angelsanchezmkiv i believe it is 1”. and i removed the header panel and did trim the metal behind for it to fit

@justsendit8462 3 жыл бұрын

Do you still have that spare front end

@justsendit8462 3 жыл бұрын

I have a 04 that it would Mach perfect with

@leroijr407 3 жыл бұрын

Do i need the bumper brackets?

@Jimmyziggy 3 жыл бұрын

If you want to get them it’s a plus. It’s possible to get one bolt on each side through but 4 bolts is definitely better with the bracket kit

@joseorozco6526 4 жыл бұрын

Hey bud...what size of the square tubing you used as the spacer for the hood latch?

@stringfellowhawk1063 3 жыл бұрын

Looks like 1/2”

@sfpl0879 2 жыл бұрын

Looks like a 1x1

@ReqnBTW 4 жыл бұрын

When are you painting it?

@Jimmyziggy 4 жыл бұрын

Reqn I’m not sure yet, i might eventually wrap it but not sure on that either. it’s not one of my main focuses at least for now!

@ReqnBTW 4 жыл бұрын

King Shaka Customs ya how much did you buy your whole front clip for ?

@Jimmyziggy 4 жыл бұрын

Reqn I think like 500 dollars or something close to that i was able to get some of it off a parts truck and other stuff on ebay or facebook marketplace

@ReqnBTW 4 жыл бұрын

King Shaka Customs thanks!