Рет қаралды 80,970
Here's a 10% off discount code: 10VEACWH
www.amazon.com/gp/mpc/AHIWWLT... - Promotional Link
amzn.to/3AmSrIO - Headlight Assemblies used in the video
amzn.to/3le3gsp - 240 Pcs Push Type Retainer Clips
amzn.to/3Bm15bQ - 190 Pcs Car Retainer Clips - with tool
amzn.to/3ag2Ona - MILWAUKEE 2457-20 M12 Cordless 3/8" ratchet
Just a quick video showing how I replaced the Headlight Assembly on my 2007 Honda Accord with aftermarket replacements from Autosaver88. The retainer bracket didn't line up perfectly, but you will see in the video that you can make it work. Removing the bumper cover completely was not necessary. Removing the top piece and lowering the bumper cover for access was much easier than I thought it would be.
I would recommend getting some replacement plastic clips ahead of time.
I didn't need to adjust or aim the headlights after installing them.
Tools needed:
Philips Screwdriver
Flathead Screwdriver
Clip removal tool (if you have one)
10mm socket and/or socket wrench
Vice grips to hold the bracket in place to mount the lower outside bolt through the metal bracket.
Thanks for watching!
-Dan the Fix it Man
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Song used in the video:
"Ego Push" by Birocratic
As an Amazon Associate I earn from qualifying purchases.