(2003-2012) Saab 9-3 Wiper Linkage & Arm Replacement

Рет қаралды 11,706

Күн бұрын

In this video I show how to replace the wiper transmission linkage assembly on 2003-2012 SAAB 9-3's. If this video helped you out be sure to like, share and subscribe! Thanks for watching.
Links for tools:
1.) Pitman arm puller tool used in video = amzn.to/3BG8ROT
2.) Actual wiper arm puller tool that only exited my toolbox to show how un-useful it is for larger modern wiper arms = amzn.to/3sU19wI
Junkyard Adventure KZfaq series and how I get a lot of great parts for cheap: • Saab Junkyard Adventur...
My Instagram @ weakest of weeks: / weakestofweeks
Feel free to contact me at: WeakestOfWeeks@gmail.com
DISCLAIMER: This video, description, and comments contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Пікірлер: 20

@Jonathan-qe8vf 2 жыл бұрын

This has just reminded me that mine has been held together by a cable tie for the last two years! 😂

@WeakestofWeeks 2 жыл бұрын

😄

@vtr0104 2 жыл бұрын

Sounds like it's a bit overdue for its cable-tie replacement, like my front air-shield tape that's holding it together :P

@glicmathan1771 10 ай бұрын

Doing this job tomorrow and this was a huge help! Thanks!

@ianhallam9308 Жыл бұрын

Thank you, saved me bags of time.

@paulgwizdala7768 Жыл бұрын

Excellent how to Video. I have an 09 Saab Conv. and this invaluable.

@boxoffice6455 7 ай бұрын

Thank you, good quality and well explained video

@Espinete87 Жыл бұрын

finally a proper video, with good quality, explaining well everything THANKS! By the way, too much profesionality, if you would see how i open and get the access there xddd....

@philliparthur8672 2 жыл бұрын

Thank you for this video and I'm thinking about taking my shroud off and painting it with some Rust-Oleum trim and bumper paint after a thorough cleaning and light sandpaper and clean my drains

@WeakestofWeeks 2 жыл бұрын

Good to hear from you Phillip! I recommend light scuffing the plastic wiper cowl cover with a scotch brite pad and using something like forever black trim restore: amzn.to/3R4jfHh While you're in there make sure you replace the cabin air filter and clean the 2 drains!

@philliparthur8672 2 жыл бұрын

@@WeakestofWeeks Thank you I will have a good one and a great weekend

@bellfilippi 3 күн бұрын

Great video, so helpful - though I’m really struggling removing the last lock nut between the linkage and the motor, any tips? Did you have to stick it in a bench vice?

@bellfilippi 3 күн бұрын

Turns out the answer was to swear at it a lot and it loosened itself in fear

@AlbanianGoose Жыл бұрын

were you able to just find the caps for the linkage or no? bc its jus the bearing thats broke on mine, i had to use weatherstrip to keep it in

@WeakestofWeeks Жыл бұрын

Simple answer is no. Years ago I repaired one of these wiper linkages with a Dorman kit (amzn.to/3m5z5a1). It required modifying them to fit and in my opinion wasn't really worth the hassle.