Such a humble guy... and what a terribly terrific video. Shows you everything he does..i wish I could give it 3 thumbs up...

I love this body style of F150s.

I recently inherited my fathers 1998 f150 3dr 5.4 flare side and love it Alan Jackson said it this piece of my childhood will never be forgotten

in the future one small suggestion. Don't pull plastic all thje way off new lights till they are installed prevents scratches. Great video Thanks.

I used Gorilla super glue on a couple of dabs and worked fine...good to know I'm not the only one who broke off the lamp ring. Just make sure to push that light down so it does not hit the frame.

I was happy to see how EASY it was to replace the headlights for this F150. Thanks for this video, I definitely will order the lighting headlights.

Ford actually made a simple design ! sweet ! Just did mine today with LEDs. They look awesome !

Refreshing to see an install that even shows the mistakes, and the repair. Subscribed! 03/04/21

Dude, nice editing skills! Keep it up brother. Thank you for the video.

Great video, I do like when everything doesn't go perfectly because it rarely does in real life. The only thing I would add is to test to make sure the light works before you reassemble it all back in place, shit happens especially with older bulbs.

You ever beat ppl in a race and then have the cops chase the other guy completely ignoring old grampa😂

Thanks for the Video! Installed mine today,on my 2003 F150 and I did the exact same thing you did, same light. I broke the mounting clip when I pushed it in. Had to glue it back on. But, Everything is on now and looks Awesome!

I just copped a 97 Ford F-150 & I'm ready to work on it 😊

I will be changing my head lights after Christmas in my 2002 150.Great video.Much thanks.

This is helpful, despite some of the issues I encountered. Firstly, the three adjusters swivel all over the place at the "ball joint", so trying to get all three into the respective slots took a lot of patience. Also..... the turn/marker light harness can't rotate around (as shown here) to avoid breaking the end off..... once they snap in place (at 90 degrees), that's where they stay. I had to "modify" the metal behind them to create a relief. The three "slots" in the new housing were molded about 30 degrees off from the factory housings...... seems lame. If you're going to go to the trouble of making these housings, why would you not position the slots the same?

IO just put a newheadlights on my 2003 F 150 Lariat in made a big difference in the lights they were the clear lens awesome lights

Thank you so much! Much help

I’m glad I found this video. I wanna get new lights mine are like a very dusty yellow fog now x____x

I got them. They like nice but have to remove the grill to aim them.

Love the truck! Sweet find to get one in such good shape...

looks great, huge difference. now ya need matching fog lights :)

Same thing happen to me when I installed lights I got from American Truck. Same style as yours but in black. JB Weld worked. Strange it was even the same left hand side. Great video by the way.

Love the F150. I have a 2002 F150 4x4. I would clean up the driving lights below . I need to get me a set of those . Mine is not a full 4 door truck but all 4 of my doors open .

Your video made it so simple! Thank you!

jus put em on my black 2003 F150,,, jus wish knew, was available with black trim around, the round part, instead of silver, ,,, otherwise great !! too, when i do headlight's, I wax, with a good UV, rated one, to prevent oxidation again. thx sharing, look's good.

you should have shown the difference between the lighting with the old and new headlights

Fast forward to 5.5 min in. It starts there. Your welcome 🤟

I got some for my 2003 f150. It was a little trouble but they fit but they show crappy so I will get some LED lights for them.

Love the update and cant wait to see the s8.

I am in need of same upgrade. I always wonder about quality of inexpensive auto products at amazon. Great prices ,but don't always know about fit and durability.

Excellent video

The look is great but how are they at night? Same, better, not sure? Great video by the way. Thank you for sharing. All the best. Mitch 🙏

Nice look, but I just did the opposite. In fact, I just received my new OEM style headlights and signals for my 97, to replace the "lightning" lights that my son installed.....My 97 just turned 25 years old, so its now registered with "Classic Truck" plates, so I figured I'd go back to the original look.

Werenyou happy with the light output

These are great trucks I have a 2000 4.2 one owner truck with 85k on the clock.My truck is black do you recommend the black headlights from amazon?btw congrats to your build you made a 407 hp beast it sonds great 👍

Oh, this is an Arts & Crafts show! Don't feel bad, I cracked the rear tail lamp trying to re-install Ford's plastic garbage!

hy ryan i have the same truck i had my truck ship from huston about 2 months ago 2001 triton her name is goldie beautiful leather interior in fact i owen 3 f150 2001 2002 2oo3 i am from the cayman island happy trucking

Hello there, I was wondering what your thoughts were on these headlights now that you've had them a few years. I'm looking at putting the same ones or maybe the Harley Davidson style on my 97 4.6 xl. Appreciate your content, I've had a 10th gen a long time and have been looking for content like this for quite some time!

Update on these lights? Still holding up? How does the illumination compare to the stock lights? Any melting? I like the look of these, but i drive alot at night.

How was the brightness at night compared to the originals

I purchased new headlights with day time running lights for my 2008 ford f-150. Do have anything on connecting the wires?

How have these lights held up after the last year? my lights are so hazed up they might as well be opaque and I am looking to replace them. I wanted to get a 1 piece set of lights but they all look like cheap garbage, especially with the craptacular LED strips they have, but these dont seem to look too bad.

Awesome in spanish too👍

Nice vid thx! Have you considered replacing the fog lights and would you go with an amber so they actually work during heavy fog, or would you go with the clear, will that work just as well in fog? BTW, I have 117k miles on my 1997 f150 5.4 L 4x4 extended cab.

Good Job! -- Great fix 💥🛠

How are they ,far as brightness goes? Alot brighter or minimal?

What’s the bolt size for the head light that hood the turning signals

Looks good but it still has that large gap near fender.

At night how was the light alignment?

This seems pretty similar to my 2004 heritage. Hoping to replace the headlights tomorrow. P.s. 400 sub giveaway? Dude your channel has grown so much!

You still have the truck. And are the head lights still working, one to when you.Bought them. Looking for an update to this vid.

Do you still have the truck? 5yr update.

Helps alot. Thanks

Dont blame the product for breaking. You gotta be easy when installing

how much better are your headlights now? I mean a big difference in the light output from before or no? How are these lights still holding up?

Did you do fog lights with the clear lenses as well? If so, will you paste the link? THANKS!!!!

I think that does look better, however I would really like to find a alternative to the ugly rear tail lights on this truck.

snap the other one too, you know, to even it out 😂

Not sure if this comment section is that active anymore but what is the piece called that surrounds the headlights and grill? Is the whole piece just called a grill? I’m in need of a new one and I’m not sure what to look for

But can you take the lense apart ?,so you can clean it

Awesome 👍🏼

Hi... Did you actually have to do any mods or filing to get those to fit correctly? You mentioned something at the end but did not go into detail. Doing those headlights , the bumper valance with the clear fog lights like you have too but using 11W H-10 bulbs and turning them into daylight running lights . About those clear fog lights, lots of reviews saying they are being melted in the back using the stock halogen bulbs ( one of the reasons for me going w a 11W H10 LED daylight / driving light type bulb, also some comments about water getting in them and peeling reflective material. ) My truck is a 2000 Ford F150 , 5 speed , 4.2 V-6 I have had since it had 11,000 miles on it ...its at about 126,00 now . Putting a clutch in, just put some 16x8 black star shaped after market rims with a +10 off set ( stock is 16x7 , +14 offset ) with 265/75/R16 Mud tires, about the biggest you can fit under there with out scrapping. A little noisier, but my god, the ride is so much smoother now..who would have thought ? . It's 2WD but I like the look and extra 1-1/2 total tire height. Also putting a 2 inch leveling kit ( urethane on top of the springs) as I have a single overload springs on the rear and a 2 inch leveling kit will make it sit nice and even . Also, a 2 inch kit is as big as you can go with out changing the upper control arms out I believe. Mine is the Super cab, not the super crew, and the styleside. Also will be putting the black nerf bar steps , a Walker Bull bar with a set of small oval amber fog lights, and I found a set of after market tail lights , the only ones I liked out of all of the many on ebay. www.ebay.com/itm/FOR-97-07-FORD-F-SERIES-STYLESIDE-BLACK-HOUSING-TAIL-LIGHT-BRAKE-PARKING-LAMPS/202320896530?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

Did you have to modify/ cut out..a section of the housing because mine won't fit on passenger side and i have the identical lights..only having problem w passenger turn signal.. everything else is fine..crazy.. and im stuck

Hey, Auto Detour - How are the headlights holding up on your F-150? Also, did you have to adjust them so that they shine at the correct angle? Thanks!

I just installed the black trim version of these on my 99 F-150, my turn signals work when I flick them on but my sidemarker doesn’t come on at all when headlights are on do you have the same problem because I can’t find any info on these anywhere your the only video on KZfaq with these same headlights

I’m 2 years late, but I’m thinking about buying these for my 97. if you still have these headlights, how is the visibility at night? Are you constantly getting flashed by other people? Is the light just scattered everywhere? Thanks

I don't want to be that guy but how do you want anybody to guess when you put the answer in the title just saying great video

My headlights aren't come out at all

Hey how do you adjust the headlight beams?

Nice video

I couldn’t get my side lamp in can someone show me how to do it I bought the same lights on this video and I have no luck with the side lamps

Anyone have any trouble "popping" the headlamp out?

CA glue

3:10 to skip this guys rambling on

You should have wacht a video on how to do this can’t do shit without braking it first smh

Music too loud! My husband said shut it off too loud!

Really didn't explain anything

I want sout out in u next video

Don't mean to be a smartass but you could easily edit 14 minutes out of this video to make it more watchable.

Intro way to long

First viewer

Sorry video!

As soon as you showed me the two clips I turned off the video because you're talk too much

You talk to much. Just get to it

If you figure, even if you manage to bring your headlight lenses back to a decent clarity and do the clear coat protection your self, you've almost spent the cost of buying a new set..clear coat spray here is close to $20 per can.. So ya..go figure..

Ya, they look nice and impressive but, chinese made replacements area often put together with subpart adhesives and fastening hardware.. they like to paint over things and use potted tin or cast the part which tends to snap in two when factory spec torque is applied.. USA spec made and supported is the way to go.. with most plastic manuf..it gets by.. but I wouldn't trust made in China metals that depends on high torque, weight and High repetitive movement.. Sometimes buying cheaper replacements doesn't deliver.. I would also keep an eye on those new headlamps and watch how soon they start to haze over..I bet thier not clear coat protected..