2003 Maytag Performa PAV2360AWW Repair Part 1: Disassembly

No video

2003 Maytag Performa PAV2360AWW Repair Part 1: Disassembly

Рет қаралды 1,752

Күн бұрын

In this part I disassemble, and inspect the machine to access the failed bearing. Not a difficult job, just time consuming. Should be the same for many of these one belt Herrin platform machines.
It appears most parts are discontinued for these Herrin machines. Go ahead, and get parts while you can!
Parts, and tools I used:
W10219156 Hub seal, and bearing kit, or MAYTAG 21002237, Use OEM, the aftermarket is junk.
Y056016 Center Seal Grease
DT22002922 Suspension Spring Removal Tool
DT22002898 Seal Nut Removal Tool
35-2968 Spanner Wrench
Optional, to go back to older design setup:
21001533 tub nut, and seal. NLA, difficult to find.
12001598, old tub, and bearing kit, NLA, difficult to find.
Spin Bearing p/n: 35-2205
I had to mix, and match on my machine to make the kit work.
Thanks for stopping by to watch, please like, subscribe, and ring the bell!
#diy #fix #repair #maytag #performa #herrin #pav2360aww #2003

Пікірлер: 13

@jaykay18 Жыл бұрын

Man, what a job to disassemble that! Even a pro couldn't do it that well.

@dynatrak Жыл бұрын

Now if I can remember how it all goes back together!

@RollingTardis Жыл бұрын

Super job on disassembly! I would be subbing the bearing for a ceramic hybrid.But that is just my idea. 😜

@dynatrak Жыл бұрын

Thanks! I'll have to see if ol' Doc Brown can swing by to take me back in time, to get that done. Perhaps next time this service needs to be done, I can have one on hand, and ready to go!

@lauravintson7753 Жыл бұрын

Much appreciated, keep up the great videos

@dynatrak Жыл бұрын

Thanks, will do!

@toyota-eh3ub Жыл бұрын

Am I right thinking this washer has a plastic inner tub? Never thought Maytag used them but it sure looked like one. I only thought the 2000’s GE washers had them, which I thought was a pretty good design, being impossible to rust, dent, or coating to chip off.

@dynatrak Жыл бұрын

Yes, it is a plastic inner tub!

@amazinginterstate95ownbtcp84 Жыл бұрын

Nice work but would you able to get a 3rd washer if you have enough room like portable direct drive or belt drive washer that is smaller only if you have enough room

@dynatrak Жыл бұрын

Thanks! No more room for additional machines.

@amazinginterstate95ownbtcp84 Жыл бұрын

@@dynatrak alright, you can upgrade the inner tub into stainless steel tube to make it look nice and shiny

@dynatrak Жыл бұрын

@@amazinginterstate95ownbtcp84 Plastic tub will be staying. That's an unnecessary upgrade.

@amazinginterstate95ownbtcp84 Жыл бұрын

@@dynatrak well alright but thx for the video stuff I use to have that Maytag model HAV and it broke because it had several leaks and it replaced by amana topload washer