2004-2020 Ford F-150 Four Wheel Drive Inoperative DTC P1867: Transfer Case Shift Motor Replacement

Рет қаралды 597,893

4 жыл бұрын

In this video we walk you through the procedure to replace the transfer case shift motor found on Ford trucks with electronic four wheel drive.
These are the Parts and Supplies I Recommend:
Permatex ATF Sealant-
amzn.to/2NPnbwP
Ford F-150 Transfer Case Shift Motor-
2004-2008:
amzn.to/30Q02Q6
2009-2011:
amzn.to/2NWQgX7
My Company BSG Automotive offers Auto Repair services in the greater Chicagoland area.
Website:
www.bsgautomotive.com
Facebook:
/ bsgautomotive
Catch up with us on-
Facebook: / fordtechmakuloco
Twitter: / fordtechmak
Instagram: / fordtechmakuloco
My company KZfaq Channel- BSG Automotive providing repair advice on makes and models other than Ford: / bsgautomotive1
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user and BSG Automotive (hereinafter “FordTechMakuloco”) makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. FordTechMakuloco shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by FordTechMakuloco and therefore, FordTechMakuloco does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge FordTechMakuloco or anyone affiliated with FordTechMakuloco, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

Пікірлер: 731

@Lonewolf3165 4 ай бұрын

I’m a 40 year Factory Trained Master Tech myself (different car lines) and I have to say that this is the guy to watch if you have Ford repair questions. His approach to his work is top notch and he doesn’t talk too much and make things complicated. Straight forward good advice and technique. Like I said, I’ve been doing this for a long time and when I want information on my Fords before I tackle something I check this channel first. Thank you FordTechMakuloco for all your videos.

@all-ininvestment9835 2 жыл бұрын

Garage wanted $600 to do this. I paid $185 and did it myself in about 15 minutes! Works perfectly again! THANKS SO MUCH!!

@magdump7380 4 жыл бұрын

When the shift motor on my 2000 Ranger failed I found that problem in motor was that the springs be hind the motor brushes had corroded and failed. I replaced them using springs from an Edelbrock carb. Back in business for free.🤘

@LiilTyweezy 4 жыл бұрын

u cannot dislike this man video he makes no errors

@turf7empest 4 жыл бұрын

Tyrell Williams so agreed!

@LiilTyweezy 4 жыл бұрын

@@turf7empest the dislikers are other private shops throwing salt because he putting us on game

@boobizzy4173 4 жыл бұрын

Tyrell Williams i totally agree brother!

@davidnation4437 4 жыл бұрын

Lol, I was seriously wondering how 14 people gave this a thumbs down

@Todjcam 2 жыл бұрын

Hands down best repair videos/instructions I’ve seen so far! Thank you 👍🏻

@clarkkent4991 2 жыл бұрын

Man I tell you. You really empower folks with knowledge. Confidence! Can’t thank you enough.

@stephenlutz123 4 жыл бұрын

If you have a Ford, this is the channel for you!

@countryman6412 3 жыл бұрын

100000000000% agree thanks to this channel I'm a 98 f150 5.4 4x4 beast lol man I learned so much about 4x4 and motor and trans. Stuff much respect to this channel✌✌✌✌👌

@donaldbean6291 3 жыл бұрын

I dont even own a ford but I love watching a true master at work.well I say I don't own a ford but I do have an order for a new bronco

@marcsongaudin8429 2 жыл бұрын

Definitely, I have a 2007 ford f150 I bought it last year with 200000 mileage that's how I know this channel and by now I know a lot about Ford. So I save lots of money on repair it.

@scottyakoubian9238 2 жыл бұрын

Agreed! This guy is pretty amazing!

@merza16465 2 жыл бұрын

Agree I'm from iraq and this is tj e best chunel for Ford 👍😊

@randydeshong8161 2 жыл бұрын

Perfect tutorial! Was easily replaced and correctly done to torque specs. Working like new!! Thanks!!

@charlieboutin3341 2 жыл бұрын

I love watching people that know what they’re doing..love doing it..and share what they do. I’ve never seen anybody better at it than this young man. You’ve helped me immeasurably with my ‘09 F-150. Thank you so much!!! 👍👍👌

@jhansen17 3 жыл бұрын

Great step-by-step directions. I followed the instructions provided in your video and completed this repair on my truck. Thanks!

@jestofreestone1 4 жыл бұрын

Man you make fixing my Ford fun. I don’t even have this problem (yet) but I’m ready to kick ass myself when I do! Thanks for what you do. I enjoy learning more about my F150

@Watchout1010 3 жыл бұрын

Fun? Wait for the timing misery!

@JeffBlondeau 4 жыл бұрын

You are the very best. Always well video'd, with clear explanations. I'm admittedly a guy who doesn't even know where to put in blinker fluid but you give me hope. I appreciate your extensive knowledge. I can only watch and wish that I could competently do all this cool stuff. Watch and Learn. I am.

@armedmariner 3 жыл бұрын

Love this guy. Great teacher. Efficient videography. Clear explanations. Great tips on procedures. Teaches me a lot about my truck. Thanks so much. This is why KZfaq was invented.

@turf7empest 4 жыл бұрын

Thanks Brian for doing such a great job with the work on my 2009 F150!

@clarkkent4991 2 жыл бұрын

Truly a wealth of knowledge and a sharing person. Sharing knowledge is everything!!! Thank you!!!

@wheatoncloud 4 жыл бұрын

Swapped out my rear shocks last week, and did the transfer case motor today. Nice and easy just like the vid. I really appreciate all the vids man, keep them coming. I need my 07 FX4 to keep going as long as it can!

@sergechabot2385 4 жыл бұрын

I wish you were here in Canada Brian I would give you all my Repaire work on my f-150. Great videos. Thanks

@brandonnapier2117 10 ай бұрын

I can't thank you enough for this video! I'm not very mechanically inclined but, this video helped me change my actuator motor with ease. Thanks again!

@redeye1773 4 жыл бұрын

YOUR VIDEOS HAVE THE BEST DETAIL AND INFORMATION THANK YOU..GOD BLESS

@stevenfuchs2548 4 жыл бұрын

FordTechMakuloco in the morning smells of Victory!!

@philheath4739 3 жыл бұрын

you are the man it make things easy when you watch someone that knows what they are doing.

@fourstarrjim 3 жыл бұрын

Good info! I had to replace the shift motor on my 98 Ranger, and this info was extremely helpful.

@reedvending2384 4 жыл бұрын

My 94 ranger i just took the cover off the locating part. I cleaned the contacts and fingers then re assembled and has been working fine for over 10 years now.

@yep5689 Жыл бұрын

My wife came home with a 06 F150 4X4 yesterday and gave it to me for my Birthday so yeah there are a few things wrong but great truck can’t believe I haven’t switched to ford earlier

@devindesanto711 3 ай бұрын

Great guide - got my truck fixed without a hefty mechanic bill. Thanks so much!!

@hevychevy87 4 жыл бұрын

Thank you for making these videos! Wealth of knowledge!

@livergen Жыл бұрын

Outstanding Sir, thank you so much for sharing your valuable knowledge. So many of us out here have no problem working on our vehicles and turning a wrench every now and then, But most often were just not sure where to start or what the process might entail. Information is always extremely valuable that's for sure, but when you give your time that is the ultimate gift someone could share, thank you sir.

@MomThemeatloaf89 4 жыл бұрын

Love the videos, always my go to if I get hung up on something!

@UploaderNine 4 жыл бұрын

Yes another great educational video. I own a 2012 Raptor and this is my Ford tech. If i lived in ChiTown Id be showing up to the shop weekly.

@cleenlivin 4 жыл бұрын

You would make a great instructor for high school or tech school. Thanks again for the information.

@Squat5000 4 жыл бұрын

You couldnt have published this at a better time. Mine just got stuck, so thank you for the info!

@vicp2645 2 жыл бұрын

Thank you for making this video. My 2011 F150 gave me an error when trying to shift into 4X4 drive. Took it to the dealer and they wanted $552 to fix this very issue. I bought the part and fixed it in 15 min. This saved me hundreds. I can’t believe they wanted to charge (rip me off) me like that. Thank you!

@jasonlarsen3515 Жыл бұрын

Diagnostic time plus parts

@Phillyfan803 6 ай бұрын

What was the error message you we’re getting? I have a 2011 ford f 250 and I the message I’m getting is shift delay pull forward then followed by check 4x4

@vicp2645 6 ай бұрын

@@Phillyfan803 I don’t remember honestly. I paid ford to diagnose it then bought the part and fixed it.

@EricGonzo1023 3 жыл бұрын

Excellent info and guide to do this replacement. Replaced it my 2011 F150 Lariat with 260K mile. I found two things to add. 1-My new motor/actuator had weak plastic for the cable retention clips (in fact one side of it BROKE when inserting into the tab). I re-used the one from my prior motor/actuator and also zip tied it for extra security. (Would hate for it to dangle and get hung up on something and rip the cable). 2-I found that inserting the separate "Blue" wire BEFORE re-inserting the red retainer clip into the new shift motor makes inserting the blue wire into the connector MUCH EASIER. Thanks so much for the video and excellent guidance. What a low cost fix for something that I thought was going to be a major dealer item.

@lacrognon1 4 жыл бұрын

you are the best reference with ford . Amazing and very qualified. thank you

@kevinstanard3696 4 жыл бұрын

You make a very professional and informative video thank you.

@MartinHernandez-xh3wv 2 жыл бұрын

Thanks Ford man for this video and I sure did save some money and now my F-150 4x4 is working

@stephenyoung4433 Жыл бұрын

Thank you and instructions are concise and easy to follow . . . replacing this part was a snap!

@Noneofyourbiz71 4 жыл бұрын

DUDE” YOUR DA MAN !!!! 👍🏽 thanks for the vid buddy !

@richardl.993 4 жыл бұрын

Wow! That was painless, even I can do this. Thanks for the video.

@antwan8901 4 жыл бұрын

Damn good video! Easy step by step. Hope I never have to change one out but if I do I'm confident I can do it myself. Awesome!

@jimkrynak5410 3 жыл бұрын

Hi, can't thank you enough for the excellent videos you put out! Jim.

@kurtevans2055 4 жыл бұрын

Another great video. I just completed this on my '08 F150. Only took about a 30min.

@joelbell1360 3 жыл бұрын

Did that fix her ? My 08 f150 is not doing anything when I shift into 4 high or 4 low. I replaced iwe solenoid and have vacuum down at both hubs.

@larryaustin6977 2 жыл бұрын

Thank you for your excellent videos. Very helpful and educational.

@thearrow5793 4 жыл бұрын

Very important information and easy to fixed....thank you ..👏👏👏👏👏👏👏👏👏

@thomaspeterson8659 4 жыл бұрын

Another great video. A DIY job,as long as you watch this video.👍👍

@mmwrangler 2 жыл бұрын

Thanks for the great in-depth explanation makes for a real time saving instal . FYI the part is up to $300+

@ozzstars_cars 4 жыл бұрын

Another excellent tutorial Brian

@AverageGIJoeOutdoors 2 жыл бұрын

This is why I hate all the newer electronic gizmos that are suppose to make our lives better and in the end make them worse.....LOL.....

@do201 9 ай бұрын

Thanks for the video. It makes it very easy to do the job. I was able to align the spline of the transfer case to the new motor by plugging the motor in and turning the 4 wheel hi/low switch. You may have to start the engine to get the motor to turn. Anyway I'm back in business.

@clydemobleyjr30 4 жыл бұрын

i have a 1990 bronco 2 mine went out. keep up the great work

@khalidkfy7368 4 жыл бұрын

You are an honest and expert man and give the finest details in maintenance you are 👍

@williamdyckman9704 4 жыл бұрын

Thanks, own ford 150, helpful advice !!

@RingZero 4 жыл бұрын

I had this motor go bad on my Chevy trailblazer a few years ago. Replaced it with Dorman part and had been functioning well so far. 18 yrs on the truck now

@isalmankhan1 4 жыл бұрын

Thanks for sharing Bro👍 very important stuff to learn from you

@paulwinder8163 Жыл бұрын

Did mine today. 2011 XLT with 200k+. Your channel is awesome. Thanks buddy.

@jameshoben2950 Жыл бұрын

Napa gave me the wrong part. Do you know the part #. I have 2011 xlt.😎

@paulwinder8163 Жыл бұрын

@@jameshoben2950 I used a non-OEM part, Dorman 600-105. Has worked as expected.

@JohnTheMexicanic 8 ай бұрын

Did you have any problems with your hub actuators? My 4x4 failed a few months back but after that I started to have a vibration on my passenger side. All suspension is new. Not sure if the 4x4 not working is causing this issue

@paulwinder8163 8 ай бұрын

@@JohnTheMexicanic I’ve sold the truck. Worked great though.

@expfighter5112 4 жыл бұрын

Great simple video! NOW I need one on the 4.0L V6 standard annoying Oil Leak problem on a 2003 Ranger! :)

@Chris-Fennimore 4 жыл бұрын

Great video. That motor and the vacuum hubs are the reason I opted for the Manual 4WD in my Super Duty. Its Been working great for me for 12 years now.

@bradjenkins932 4 жыл бұрын

Yes and you have neutral.

@turf7empest 4 жыл бұрын

009to090 I understand but I need to be able to switch in between frequently without stopping.

@bombardier3qtrlbpsi 4 жыл бұрын

I must be lucky then!! I have a 2007 f150 410000 km have not changed that motor on the transfer case yet. Touch wood. Great job thanks for sharing.

@MeltingRubberZ28 4 жыл бұрын

My 07 F150 is currently stuck in 4L

@chieft3357 4 жыл бұрын

Again, thanks much for the info video. It doesn't look like a hard job but if you have not ever seen it done, I'll bet it would give one second thoughts about fixing it. 👍👍👍

@clinnyboy 4 жыл бұрын

This video presentation helped me immensely. Clear concise explanations with great video shots. I bought the part, followed the instructions, everything went smoothly and it worked perfectly once done. One addition; I did pray before hand; Jesus is a great 2nd pair of hands.

@hughmackellar7941 4 жыл бұрын

As a owner of a 08 Super-Duty, thank-you.

@AntonioClaudioMichael 4 жыл бұрын

Very helpful video doing this on a 2005 ford excursion

@joelgarcia6294 2 жыл бұрын

I really like that he is calm and his work is very very clean and he informs you of every little detail but he's real clear on everything thank you

@Burrkilla 4 жыл бұрын

Another great video. Keep em coming.

@williambendell1582 2 жыл бұрын

Your the best out there, keep up the good work. Thanks,⭐️⭐️⭐️⭐️⭐️

@kylespindler963 2 жыл бұрын

Thank you so much I fixed my f150 and saved some money!!!!

@ricardorr5496 3 жыл бұрын

Thank you for this usefull video. Many greetings from Germany.

@lbaker3602001 Жыл бұрын

Big thumbs up 👍 Bought a 2002 Ford Exporter 4x4 Sport trac year & a half ago.

@donc9751 4 жыл бұрын

Great video and info!!! Thank you so much!!!!

@davestewart9146 4 жыл бұрын

Great information, thanks Brian 👍😁

@rockwasequim5924 5 ай бұрын

Best info on this part that I have seen. Thanks

@yoteoboth8449 4 жыл бұрын

Very , Very helpful! I would not suggest moving to California, however, wish you were here.

@tom8592 4 жыл бұрын

Give me a simple floor shift any day. Keep it simple. Great video.

@MeltingRubberZ28 4 жыл бұрын

Yeah wishing mine was that way

@1nhman 10 ай бұрын

Great instructional video, thanks for posting.

@ralfsautomotive 4 жыл бұрын

The Bracket is something alllllot of younger mechanics would not pay attention to, great tip on pushing it into position first.

@zmodem4619 4 жыл бұрын

Great video! I have an '04 F350 4x4 (6.0). I just gotta share this fun ride. First, I'd like to note that I _have not_ solved my issue. I thought this t-case motor going bad was my issue when my 4x4 wouldn't engage (the light wouldn't even come on on the dash when I selected 4-hi or 4-lo). Anyhow, I replaced the motor, and turned the truck on and tested it and VOILA, it seemed to work. Well, the plot thickens. Now, if I turn the truck on and immediately select 4, I can get it into 4 hi or lo, and hear the t-case motor engaging. But, if I drive it long enough in 4x, and then decide to put it back in 2, it will not shift back into 2 no matter what (fully stopped, in either neutral or park). Vacuum line fills, and doesn't turn on or off intermittently, and the vac line seems good. Setting the hubs to either auto or manual works fine after I engage 4x with the internal switch/through the t-case, so I'm getting vacuum on auto, and good lock on manual from the hubs. So, I found out that I have to turn the truck off and then back on in order to have the actuation take place. If I'm driving for a while on the highway and decide to pull off somewhere that requires 4x4, I need to pull over, completely turn off the truck, then turn it back on (ON only, or cranking it over) before I can switch over. Same goes for being in 4x: I need to stop, turn the truck off, then turn it back on in order to disengage. Strange. All of my fuses are fine under the dash, and the relays under the hood are brand new and they switch when I test them manually with a test light. Go figure, I'm stumped, and three shops have been stumped as well lol. Meh, turning the truck off and back on is no big deal at this point, but it's a mystery to be sure.

@MeltingRubberZ28 4 жыл бұрын

Interesting. My F150 is now stuck in 4 low. Pulled a stump out and now it won't switch. Dash doesn't light up 4 high or 4 low anymore either

@zmodem4619 4 жыл бұрын

@@MeltingRubberZ28 Wow! Yours sounds like a seized T-Case, but if the dash light turned off, that means the relay is telling the computer that the T-Case is in the correct position. I finally solved my issue, it was a loose connection AT the T-Case motor. When the truck would get "hot", the terminals would expand and slide away from contact. When it cooled off, the terminals would shrink and make decent enough contact for the relay to talk to the T-Case, and vice-versa. Your issue could be hub & or vacuum related. Check for vacuum leaks. Jack up the front, check to see if your hubs are locked by spinning the tires. See if the front shaft spins freely or if it's locked. If the hubs are locked, then you know it's a hub/vac leak (usually manually unlocking them will work, or you can unplug the vac from the reservoir near the vacuum pump on the passenger side to remove all vac pressure). The light not being on is why I aim the solutions more toward a hub seize, or a vacuum issue. The light is controlled by the computer, which gets its information directly from the relay sent from the T-Case. You could check the two relays under the hood on the driver side. They are two identical black relay switches (almost perfect black squares) under a black plastic cap which looks rectangular. They sit near either the driver side battery, or more toward the driver side firewall (around the outer edge of the DEGAS/coolant overflow bottle). Check the relays, or swap them, and see which one is bad. Good luck!

@1hjehje 4 жыл бұрын

Another excellent video ... Thank you!

@mikecont9742 4 жыл бұрын

Absolutely great video.So informative.....

@carlosescamilla2779 3 жыл бұрын

Good man ur an excellent teacher

@mikechiodetti6737 4 жыл бұрын

Thanks Brian for the info. I've worked a few Ford 4WD problems, never replaced the motor. The vacuum system and the 4LO switch. ( the switch turned on the 4LO indicator in the the cluster. These trucks were 2003-2004 models)

@DanielGonzalez-xw8ct 2 жыл бұрын

Do u know if that’s why I’m having problems reversing left or right on 4x4 ?

@ElanTuna69 Жыл бұрын

Thanks for the video. This helped on my 2016 f150 with the 2.7 . That wire is a pain and the clip is white not red. Noticed my oil drain plug is leaking , I doubt the dealership changed the o ring on it last time, was down half a quart , only been about 1800 miles since it was changed.

@MrPami9899 4 жыл бұрын

Great video as usual 👍👍👍

@rickcrain8685 3 жыл бұрын

Thank you for your videos, you're awesome!

@fourstarrjim 3 жыл бұрын

Thank you: you’re a life saver!

@etubrutus3501 4 жыл бұрын

Excellent! Excellent! Instructional video.

@axelbart7470 4 жыл бұрын

Great information thank you Brain

@RobHokie88 Жыл бұрын

Thanks. It worked like a dream. 2011 w 177k

@uw8850 4 жыл бұрын

Well done. Keep up the good work.👍

@MigityMigityMike 4 жыл бұрын

Aight Brian, there’s nothing wrong with mine yet but Imma buy one cause you’re never wrong and I might as well be prepared for when there is

@pocos2571 2 жыл бұрын

Fixed it. Thanks for this video!

@stitch1960 6 ай бұрын

Thanks for the vid bro. 😎 saved me 2 days of trouble shooting. Lol

@robertsalay7312 4 жыл бұрын

You're a good man.

@nicholassmith4172 3 жыл бұрын

Great video. Very helpful.

@carthrasher8022 4 жыл бұрын

Another great video! Thanks!

@leedress2187 4 жыл бұрын

Nice easy repair.. thanks..

@scottmcphail1787 4 жыл бұрын

Another great video. Can you make more on the 2000-2003 trucks?

@KarlChristofferson Жыл бұрын

wow fantastic. youre a good teacher

@jonathanandrews1407 4 жыл бұрын

Ooooo Brian your my HERO 🥰

@narcisomurillo194 Жыл бұрын

Thank you so much for your video it help me a lot I save a lot money ❤

@darylhagle8565 4 жыл бұрын

Thank you for the videos !