I love your tenacity and never say die attitude. Most backyard mechanics would have given up when you found the air leak with the carb. Not you. Congrats on your new acquisition.

I don't know what I like best about your videos; Your presentation, mechanical ability, editing or the pup! Probably all of them!

I believe you will find that coolant line going to that carb is not to keep it cool, it is actually there to warm the carb for better fuel vaporization during cool weather. I use Simple Green HD in my ultrasonic cleaner. Never had a problem with discoloration of any carbs. The zinc content is what causes the discoloration. The FD620 is a great engine. I have two of them. One in my 425 Deere, and the other I put on my Grasshopper. I rebuilt the one in my 425 after I got it. The engine was so worn that I had to have it bored oversize, replace the crank, and even change the carb body out because the throttle shaft was worn so bad. You could push the pistons side to side nearly 1/32”. But the engine still ran fine, was just pushing oil out past the crank seals due to excessive blowby. Tough little motors!

Looks like you could mount a 50 cal on the crane. Welcome back.

Just FYI the coolant that goes through carburetors or through manifold is actually designed to heat them not cool them. The evaporation of fuel creates a significant cooling effect and sometimes coolant is run through to prevent condensation and even potentially ice from forming

I also owned a Steiner it was the 3 wheel, steer in the rear 60in deck with a roller attached. I mowed acres that started out terrible bumps ended beautiful and smooth, I LOVED it cried 😢😢when I sold it due to a life changing illness.

Cutest thing ever you and the dog cruising

The tune at the end is reminiscent of 38 Specials "Hold on Loosely."

You made me laugh when you mentioned Diesel Creek’s new crane, his one would scare the deer away. That’s an awesome side by side setup you’ve got there and runs mint now 👍

When you asked your dog if he liked this new rig, your dog was like “Thank God I’m not a deer!”

I wasn't sure if it was mentioned or not , but the Kawasaki engine also powered the cub cadet tractor aswell.

THANKS for sharing another GREAT VIDEO 🤙🏼 it’s always nice to watch you do your thing, no fluff straight to the point and thorough💪🏽. You take us along as if we’re there watching you at your shop and also great seeing lil buddy and the other dog. THANKS AGAIN 😎🤙🏼 ALOHA FROM HAWAII 💪🏽

Nice Video. Seeing this vehicle with the US flag on it and a guy writing in the comments ,,you could mount a 50 cal on it'' i knew i was in the american part of KZfaq again😂 Grettings from Austria🤙

What a cool little rig! The fella that owned it before you wasn't going to let anything stop them from getting out and enjoying life. It's going to make a great work vehicle for your property.

Love Kawasaki engines! My first John Deere had one I did all the maintenance till I sold it after 20yrs still running fantastic! You do awesome work, I would love to own this very cool ❤

Another job well done my friend!!! I hope you and your family are all in good health!!! Your pup was funny when you asked if he wanted to go for a ride! Thanks for sharing with us, and good luck with the new machine!!!

This guy never ceases to amaze me

The difference between diesel creeks crane and ur machine is that i watch and liked and give a sub, non of that all i did with diesel creek vid 🙃 Nice job u did here, stay humble and honest with what u do. L🖤ve ur vids and skill👌👍✌️

Good job! I could've used that rig and made getting a deer out of the woods a whole lot easier! You'll really appreciate having it the first time you use it! Thanks brother

Been using zep heavy duty citrus degreaser in ultrasonics for years and it does not change the color of the carbs and does a great job.

What I enjoy is your finding unusual items and then make them work. Fascinating. Thanks B Anderson

Awesome job. I can just picture some old boy who's got a life time of building things piecing that thing together. I'm sure he was a hard working man who wore out his body and needed the crane and winches to help him still be ble to enjoy the things he wanted to do. Great to bring it back into working order.

MM77 Approved 👍🏼👍🏼………………………………………………………………………………….Good to see you post a video! ……………………..dare I say it………………………..something else you can fix! LOL 😂 That is a cool hunting rig!

That thing is pretty awesome. Good job on the tune up.

Great video. It's always a pleasure watching. Thank you

Fine Job

Glad you’re back! Really great video once again.

Congrats on finally gotten ur 4x4 mule running and driving good. ask if ur dog wanted go for a ride..

That was a great rehab rebuild that piece of equipment deserves that kind love great job 👍

Another jewl man, Great video.

Wicked fix.👍👏👍

Nice result.👍

fuel cell cleaning? good job bringing her back to life

Love that rig

Cool machine!!

good job young fella

Great work, and doggo is adorable!

Another sweet machine to add to the fleet, great job as always man!

Dang if i lived near you I would gladly pay you to fix up my 2003 Mule 3010. Its the exact same as you just fixed without the 2nd row seating

I really love that machine it’s Great good job on getting it going.

That squeak would have finished me 😂😂. Glad you sorted it buddy. Hope all is well 😊

Salut à toi. Ne prends pas, comparaison, avec Matt de Diesel Creek. J'aime sa chaine, mais sincèrement, je préfère ce que tu nous montres. J'aime voir, une de ces machines, laissées pour compte, reprendre vie, avec toi. C'est toujours mené de façon impeccable. C'est de la mécanique, ce que j'aime. On change ce qui doit être changé, mais on répare ce qui peut être réparé. Et tout çà, en véritable professionnel.

Great problem solving skills. You have a lot of talent. Great job!! Thanks for sharing.

That coolant hose to carburetor is actually for the choke operation. Great channel!

Another great job, not surprised…

Happy Thanksgiving. Love your channel

Bad ass find... great job!

What a awesome utility rig. Great job on the repairs and bringing us a great video. I’ll be working on some of the fun projects here over the winter here also. Look forward to the next upload 😎🇺🇸

Great work Darrell. Love those lights. Nice "will it run" vid and that thing is versatile. Probable make a good log skidder as well. Love that dog. Happy Thanksgiving and Merry Christmas to you and your family.

Love your videos👍. Excellent content, editing and presentation! Looking forward to next one.

Nice one, video and vehicle ;) 👍

That thing is So cool! It would be handy around the farm to move hay bales or engines! Great vid instant Sub!

Like a giant jigsaw puzzle. Another treasure saved from the land of the dead. That is a neat vehicle that seems very useful and also has the added bonus of being less likely to kill you than the last find. I always look forward to your fun videos. Enjoy the new toy!

What a nice Kawasaki Mule 👍🏻, thanks for another great video. Regarts from Holland 🇳🇱.

Little buddy loves it

Your passenger rear taillights out.those mushrooms are prized edible honeys or possible oysters,also prized edible can tell them by cojoined stems branching off one another.true thing running about in woods tires must run over spores and then propagate new growth were atv sits because i had soft open dirt at home were i parked.one week after sitting i found a huge morel mushroom super prized edible.dam right i cooked n ate.not only that but i live in suburbia far from woods that was crazy.better get some doors on there ur dog was gonna jump a few times it looked to cute dont wanna see hurt.anyhow nice save,have fun.snooky pa😊😊😊😊😊😊

Nice rig Darrell, have not seen you post for awhile glad to see a video. Good job buddy!

Another great video, awesome, thank you for sharing, have a nice week end 👍👍👍👍

good job more video s please

A good video.

Another excellent rescue! Again, really like your methodical and well thought out approach to things. Interested in the light, don't see a link...

Anither fantastic will it run video.you bring that mtv back to life again. Now all you need is get yoursellf a nice hunting gears and hit the road with that custom build huntting vehicle. Good luck and keep up the good work. 39:38

I would think that skinning pole might be a problem, if off road, with catching limbs with it pointed forward.

👍

Kawasaki should offer those mods as factory options. They're well thought out, especially the crane. Also, there's something wrong with the audio channel, possibly the mic or low battery. There's a lot of IM distortion on high frequencies and impulse sounds. Very annoying/disconcerting. Consider using a professional on-body wireless mic.

1 day build? Running very well there. Someone gave me a 16hp lawn tractor I need to fix. Probably just carb and a new belt.

Sir I would love to see you working more of your skidsteer and excavated please loved the channel God bless you and family

Great Video. Comparing you videos to diesel creek isn't a fair comparison. Matt is located in the heart of what at one time the steel and manufacturing capitol of the United States. The opportunities that afforded him is great. Think about having US Steel headquarters a few miles away. Most importantly, you're two different people. You have a different presentation style than him. I can relax and watch you videos. Keep up the good work!

Another great rescue! Hope everything goes well. If any parts you need for, plz let us know

I can totally envision the handicapped kill cart rolling through the woods and scaring away every deer in a 5 mile radius.

While it can certainly be used for hunting, I believe it's actually for loading a wheel chair on that bent rack on the back

Great video man, hope you and your family have a happy Thanksgiving bud.

@the home pro will you be doing another video on the Steiner??

👍😊

Be careful with that front bumper. I have a kawasaki mule and I am always bending the front bumper out. Because the mounts are weak

With a bit of strengthening make a great small engine crane 😊

That rack in the rear is trouble.

Esta ala venta

your videos are getting better and better .. good

Awesome machine and great job bro👍😉 fortunately you used a piece of wood instead a 🦌, KZfaq doesn't like bloody things 😂

Personally; I prefer Simply Green myself.

Cool rig! Are you a hunter?

😊😊😊😊😊

Anything with lye is going to react poorly with aluminum. Purple power degreaser is not good for aluminum parts, nor really is normal simple green. Simple green makes a special "aircraft" formulation.

Don’t use Purple Power on anything containing rubber, plastic etc if it is going to set on it for very long at all.

I would remove that low back rack and do some mods to raise it

Where did you find that? Isla Nublar?

Those mushrooms are eatable. Scramble them with eggs!

need link and coupon for light

Mushroom?? Looks like honey fungus. Not a good one..

I cringed when you wire brushed the carb sealing surfaces. That might be your air leak.

👍🏻💪🏻🦅🇺🇸🗽👌🏻

You're name is Darrell? Do you watch Darren?

You will have to buy a lot more crap to even br in Diesale Creak's leage

To many adds.

Whats that music called that started when was power washing?

👍