2004 YZ250 Build

Рет қаралды 56,786

Күн бұрын

Hi everyone!
Here we have a really low hour clean 2004 YZ250. The bike is 100% stock down to the tires!
The owner of this bike thought it would be a perfect candidate to do a Chad Reed tribute build. Not a "replica" as the parts are nowhere near the same.
Hope ya'll enjoy the video!
Main Parts list include:
- Pro Circuit motor modded for C12
- Lightspeed carbon fiber throughout the entire bike
- Race Tech Gold Valves
- GYTR top triple clamp
- Raptor Titanium footpegs
Video:
Intro/Breakdown 00:00 - 00:56
Motor 00:56 - 05:03
Frame 05:03 - 5:53
Suspension 5:53 - 11:10
Wheels 11:10 - 13:22
Brakes 13:22 - 15:34
Carburetor 15:34 - 16:31
Building 16:31 - 25:08
Walk Around 25:08 - 26:17
Startup 26:17 - 27:13
Ending 27:13 - 28:49
Work was done at Moto Scrub in Ontario, CA.
Instagram: @moto.scrub

Пікірлер: 62

@dtha70 Жыл бұрын

You keep finding at of these cherry hardly ridden stock bikes I HATE YOU lol. Makes life a whole lot easier.

@whiteman3075 Жыл бұрын

Ryan’s bikes are coming out sweet! I just bought a pro circuit 250 top end off him today.He told me about this channel and I’m now binging on these builds. Most people don’t realize the man hours this takes. Iv done my own and can tell you it’s cheaper to buy a new bike a most causes but the labor of love is what you do it for. Keep up the great videos Johnny.

@TheSlim93gt 7 ай бұрын

Im glad to see a Chad Reed replica. Tired of all the cookie cutter McGrath look a likes. I've always wanted to do a Doug Henry works 4 stroke (white plastic, red graphics, AL tank) but with a 2 stroke. Kind of a middle finger to what that bike started.

@ankrapek12 9 ай бұрын

you dude deserve more recognition, keep it up, people will eventualy share your amazing work!

@MotoScrub 9 ай бұрын

Thank you!

@Jamo29 Жыл бұрын

Legit talent right there!! Bike looks amazing, super clean 👌🏻 Love the cookie cutter Factory Yamaha look of yesteryear mixed with trick parts 😍

@73rlight Жыл бұрын

Great videos! Please keep them coming.

@rickystephens7253 10 ай бұрын

All around awesome job bro!💯

@birel_dd2 Жыл бұрын

Top work Scrub 👌👏💎

@TNTMOTO Жыл бұрын

Nice build. Very clean look.

@stihlms Жыл бұрын

Nothing beats oem plastic. We try to use oem everything on our bikes.

@dougbotha8768 2 ай бұрын

Good looking bike.

@dustinrichards8401 Жыл бұрын

Clean!!

@MANBEARPIG111 Жыл бұрын

I have a super clean 04 yz250 i cant wait to build it out a little more.

@MotoScrub Жыл бұрын

Thats awesome, make sure to share so we can all see! 😁

@zachliter619 Жыл бұрын

You make me want to learn more on suspension work. It one of my least favorite things to during my builds.

@mikedillon3119 Жыл бұрын

very classy and period correct looking refresh nice 👍🏿

@MotoScrub Жыл бұрын

Appreciate that! That era was too good looking to mess with it 👍🏻🤘🏻

@badboycash1 Жыл бұрын

You started with a super clean bike to start with out of someone's collection no doubt nice build tho you finished it well

@Haljo Жыл бұрын

Where did you learn all this? Dude you are amazing!!

@andymclain2574 Жыл бұрын

Dayum! U gotta do this to my 1994 Cr250🤘 badly

@leandromilanezsoares2798 11 ай бұрын

Muito top ai sim parabéns

@Thepianobird Жыл бұрын

I have to say you have a nice taste in mods. Especially the Race Tech gold valves and PC head work.... The only thing I might have done more is some gear micro polishing and cryo treating. And some Ti hardware, but it looks like you might have some already.

@bielbills Жыл бұрын

Outstanding work! What a beauty!!! You need an Andreani vacuum suspension pump to proper bleed the air from the rear shock to avoid hydraulic cavitation.

@zsoltpolgar5867 Жыл бұрын

Nice job...

@MotoScrub Жыл бұрын

Thanks!

@TWITCH772 2 ай бұрын

Hi, I am amazed at the results you get in the parts washer. Looks as good as ultrasonic cleaner. Do you have a solvent you recommend?

@Goffens 3 ай бұрын

Great build but were can i get my hands on GYTR top triple clamp for my 2004 do you have a part number?

@AbcAbc-ox6pg Жыл бұрын

I have the same bike, I restored it to 100% OEM new condition, it took me one year of work.

@MotoScrub Жыл бұрын

That's awesome, lets see it!! I'm sure everyone would enjoy looking at a nice OEM build 😁

@juicedelco Жыл бұрын

What ratio did you run? Looked really lean, unless it wasn't 5gal.

@bump2007 Жыл бұрын

Nice build. Where did you get the fork guards? I ordered a set from them over a year ago and still havent received them.

@MotoScrub Жыл бұрын

All the parts were given to me by the customer but I believe they were purchased directly from Lightspeed...

@nickwukmir9853 Жыл бұрын

Last of the good frames.

@rclmxshift Жыл бұрын

When you add the gold valve to the rear shock, are you shimming it to the stock spec? Bike turned out sick looking.

@MotoScrub Жыл бұрын

Both the fork and shock were revalved while installing the Gold Valves 👍🏻

@positivecarry07 Жыл бұрын

Yo Moto Scrub - Maybe you can ask your followers if they have a 98 or 99 YZ250 for sale? I’d love to see a McGrath tribute.

@Logan-tf6nk Жыл бұрын

Sweet build! I'm curious how you do these types of builds all the time. Are these for yourself or customers. Keep up the good work!

@MotoScrub Жыл бұрын

Thanks! They are customers bikes besides the 2006 RM125 an 2004 KX125 ^^

@ishy5462 3 ай бұрын

What foot pegs were the new ones?

@robertwaynereoo3636 Жыл бұрын

If you don’t mind me asking mate, what jetting specs do you have? And how many turns out is your airfuel screw? Plz

@MotoScrub Жыл бұрын

Used the jetting specs directly from Pro Circuits website. Main 175 Pilot 48 Stock Needle (N3EJ) Needle Position 2 Air Screw 1 Good luck! 🤘🏻

@robertwaynereoo3636 10 ай бұрын

@@MotoScrub cheers mate thank you so much do you mind if I asked what fuel ratio you running it at? Please

@cristinegutierrez9893 Жыл бұрын

Want that so bad 😭😭

@zoulou6700 Жыл бұрын

Good evening ! great video ! where did you buy the frame protectors and the carburettor hoses please?

@MotoScrub Жыл бұрын

Frame protector - 3M brand, 4inch grey grip tape, purchased in big rolls. Then custom cut. Honda hoses - part number: 95003-07008-60M Good Luck! 👊🏻

@pedrofernando176 Жыл бұрын

✌👍🤙

@MotoScrub Жыл бұрын

✌🏻🤙🏻

@DanielRuiz-cr6gq Ай бұрын

Buena reconstrucción pero la has desgraciado quitandole el manillar original una pena...

@joaopaulocordeiro6954 Жыл бұрын

Befora was a museum/ colection pieace

@justinkimball1399 Жыл бұрын

is it for sale and if so how much

@juicedelco Жыл бұрын

What's the ball park on somthing like this?

@Thepianobird 7 ай бұрын

you can build that bike for 4 or 5 grand. Im doing one right now. I got about 35 sank into it.

@GavinBose Жыл бұрын

Where did you get your subframe bolts?

@MotoScrub Жыл бұрын

The top portion of subframe is the OEM bolt. The two lower bolts are from "Bolt Hardware". 👍🏻

@GavinBose Жыл бұрын

@@MotoScrub thank you

@johnbecker5213 9 ай бұрын

this makes me think about how much better Mcgrath is than reed.

@MotoScrub 8 ай бұрын

Thanks! ❤️

@user-kj7uy5lj2x 8 ай бұрын

Eliyte Indonesia ra mikir wong lugu lugu Indonesia dilibatke utekke ...oas kui elite utekke mbok kei senjata oersng karo irael cino pas podo ngeyel e soal e

@leandromilanezsoares2798 11 ай бұрын

Muito top ai sim parabéns