2005 Chevy Corvette - Refinishing C6 ZR1 Brake Calipers

No video

2005 Chevy Corvette - Refinishing C6 ZR1 Brake Calipers

Рет қаралды 645

Күн бұрын

In today's video - I use left over parts from the Silverado ZR2 - and decide to use the ZR1 brakes on the Corvette. I had a set of front calipers that needed to be refinished - and go though the paint process on them.
The rears - I bought new and had shipped to ‪@latemodelthrottlellc9474‬ to machine them to fit a set of 17" drag wheels. I then refinished the rear calipers as well.
I was able to finish off both sets of calipers with new Corvette logo decals from ‪@GEARHEADdezign‬
Tools/Parts Used:
SprayMax 2k Clear: amzn.to/47OOe1f
3M Scotch Brite Pads: amzn.to/3vTyZH9
Blue Caliper Paint: Blew Me Away Pearl
Caliper Machining: ‪@latemodelthrottlellc9474‬
Caliper Stickers: ‪@GEARHEADdezign‬
C6 ZR1 Front Rotor: amzn.to/3OkyRqp
C6 ZR1 Rear Rotor: amzn.to/3SyIdSa
C6 ZR1 Front Crossover Tube: amzn.to/3SzFGa6
C6 ZR1 Front Caliper Driver: amzn.to/3SyHIaK
C6 ZR1 Front Caliper Passenger: amzn.to/4b8KXNn
C6 ZR1 Rear Caliper Driver: amzn.to/3SkyJs6
C6 ZR1 Rear Caliper Passenger: amzn.to/3HVWh25
C6 ZR1 Rear Caliper Pin Kit: amzn.to/496Agc4
C6 ZR1 Front Caliper Pin Kit: amzn.to/3udtvXq
C6 ZR1 Front Brake Pads: amzn.to/3ud4Z8K
C6 ZR1 Rear Brake Pads: amzn.to/3SbwDLg
Milwaukee M18 Battery: amzn.to/3il6loT
Milwaukee Charger:amzn.to/2YcteUx
Craftsman Hex Socket Set: amzn.to/3vvhJVU
Craftsman Extended 1/2 ratchet: amzn.to/3opxr1q
Craftsman Ratcheting 12MM Wrench: amzn.to/3EuTMQE
Craftsman Socket Set: amzn.to/3z315NP
Milwaukee Charger: amzn.to/3keJTP7
Milwaukee 3/8 Ratchet: amzn.to/3wt7G2O
Thanks everyone for all of your support!
Help support the channel by checking out the store:
www.bonecrrushe...
Send me stuff!
Craig BonecrrusherSS
PO BOX 63
Denver, NC 28037
The Tools I Use: www.amazon.com...
Follow me on Instagram: / bonecrrusherss
Follow me on Twitter: / bonecrrusherss
Like me on Facebook: / bonecrrusherss
This post/video contains affiliate links. As an Amazon Associate, I may receive commission from qualifying purchases made through my links.

Пікірлер: 14

@DownWithit 6 ай бұрын

Good thing about small paint projects... if it screws up you can fix it.... as long as you persevere. I learned a lot about painting from my small projects but I leave the big ones to the pros😅. Good job. They look sweet

@bonecrrusherSS 6 ай бұрын

The clear coat screw up was kind of a blessing - it forced me to redo the bad tape off/paint not matching job. I painted my entire truck bed 2 years ago - but this ended up being way harder!

@GEARHEADdezign 6 ай бұрын

Yeah the file you sent was raster, so I had to recreate it in vector format. Came out looking really sweet with the clear. That'll be on my list for the C6 Z51 fronts with my modified CAMARO logo.

@bonecrrusherSS 6 ай бұрын

Make a video 📹

@snowblindburd 6 ай бұрын

Boner and Woody, collaborating together for great success. Calipers turned out nice!

@bonecrrusherSS 6 ай бұрын

That's a lot of 🍆

@lj5773 6 ай бұрын

It's kinda bugging me you didn't powder coat on such nice calibers, but good job on the paint looks great.

@bonecrrusherSS 6 ай бұрын

No one had the proper decals to send them off - get the powdercoated, the decals added, then a clear layer coated on top. So at that point I am either clear coating it myself - or do the whole job myself. Plus I painted the big brake kit on my truck - and no issues so far.

@lj5773 6 ай бұрын

@bonecrrusherSS it'll be fine. I've painted some when i was young. I never had an issue, and I never put half as much effort into it as you did. Now, I usually disassemble, have them coated locally, reassemble, and order vinyl stickers online for decals. Well, on other people's cars. On mine, I usually go CTS V with the oem silver and just leave the factory finish. You didn't have that option with their condition.