Thanks for showing exactly the locations of the lift points.
@Sellthoseflippingcars14 күн бұрын
Your welcome, thank you for watching
@kuzuya9375 ай бұрын
Helpful and quick like all videos should be
@Sellthoseflippingcars5 ай бұрын
thank you for watching!
@JohnJames.2 жыл бұрын
Thank you sir, about to do brakes on wife's van , wanted to be sure , you're doing a great job
@Sellthoseflippingcars2 жыл бұрын
Thank you John! Getting comments like yours makes it all worth it thank you!
@Saint696Anger Жыл бұрын
Came here to double check where I'm lifting on van and was correct however i messed up my pinch welds when I was a teenager 😂
@Sellthoseflippingcars Жыл бұрын
No worries brother, who doesn't? Lol 🤣 thank you for watching and make sure to subscribe for more DIY Auto
@RogerPEzell9 ай бұрын
Thanks a lot for taking the time I wasn’t sure I needed to look at the front of the new brakes. I really appreciate you taking the time.
@Sellthoseflippingcars9 ай бұрын
You are most welcome! Thank you for watching and subscribe for more Auto content! Thanks again Roger
@RenegadezFaith Жыл бұрын
Hey bro, just wanted to say thanks for the info. Been turnin wrenches since I was a kid and have been jacking up vehicles wrong this entire time. Thank God I never fubar-ed them. I like how you are actually looking out for the people to help save them money. Righteous bro.
@Sellthoseflippingcars Жыл бұрын
That is what it is all about brother! I am glad you were able to learn something, as mechanics we learn something new all the time, its just who we are! Have you ever tried recording some of your repairs?
@bevybaby1000 Жыл бұрын
Double welds are damaged and rusted!! Jack punches through the van. Boohiss!!! Thanks for the video!
@Sellthoseflippingcars Жыл бұрын
Yes that is why this vehicle is in the junkyard......I was just showing you the location, not showing you what the double welds should look like. Thanks for watching!
@fxm57152 жыл бұрын
Thanks, dude. Exactly the info I needed.
@Sellthoseflippingcars2 жыл бұрын
You are most welcome! Thank you for watching, dont forget to like and subscribe for more DIY auto!
@derekatwood62362 жыл бұрын
Thanks! Had a hard time figuring out where to put the floor jack.
@Sellthoseflippingcars2 жыл бұрын
You are most welcome! Thank you for watching Derek!
@wonderingwildling2598 Жыл бұрын
Definitely lifted on the sub frame and bent it, still have an inch clearance on the control arm but wish I didn’t do it before WATCHING THIS VIDEO! No biggie, Now I know for next time, Thanks brother! 🪬💪
@Sellthoseflippingcars Жыл бұрын
You are most welcome brother and sorry to hear about the little mishap. Thank you for watching!
@Frijoles272 жыл бұрын
So helpful! Thank you 🙏🏻🙏🏻🙏🏻
@Sellthoseflippingcars2 жыл бұрын
you are most welcome! I am glad you enjoyed the video and found it to be beneficial!
@preciousjames4 ай бұрын
Purrrfect. Thanks dude 🙏🏼
@Sellthoseflippingcars4 ай бұрын
You are most welcome! Thanks for watching!!
@DavidWCot7 ай бұрын
Thank you Sir🍻🍻🍻🍻🍻
@Sellthoseflippingcars7 ай бұрын
Your welcome! Thanks for watching!!
@artleap10 ай бұрын
Thanks!
@Sellthoseflippingcars10 ай бұрын
You are most welcome! Thank you for watching!
@jaydeecamp422510 ай бұрын
Helpful. No more doubt now
@Sellthoseflippingcars10 ай бұрын
Glad to be of assistance! Thanks for watching!
@addaamanderrsoon40309 ай бұрын
Great video, thanks for explaining and the finger icon is huge.
@Sellthoseflippingcars9 ай бұрын
Your welcome! Thanks for watching
@tiffanyrodrigues331110 ай бұрын
Sweet and simple
@Sellthoseflippingcars10 ай бұрын
I'm glad you enjoyed the video! Thanks for watching Tiffany!
@eagleriver900 Жыл бұрын
thanks !
@Sellthoseflippingcars Жыл бұрын
You are most welcome!! Thank you for watching!
@kennysmith8037 Жыл бұрын
Your a life saver thank you
@Sellthoseflippingcars Жыл бұрын
You are most welcome Kenny! Thank you for watching and stay tuned for more DIY Auto Repair here on the channel!!!
@jimisnotunique Жыл бұрын
great video. thanks
@Sellthoseflippingcars Жыл бұрын
You are most welcome Jim! Thank you for watching! Stay tuned for more DIY Auto Repair here on the channel!
@mediocrefloridaman Жыл бұрын
Great job!
@Sellthoseflippingcars Жыл бұрын
Thank you!!! I am glad you enjoyed the video, make sure you subscribe for more DIY Auto Repair!!
@ggsmith489062 жыл бұрын
Thank you for this. Question, where is the lift point / stand point(s) if one is doing work on the rear axle? Say, replacing a leaf spring or installing a trailer hitch (which usually mounts to the rear leaf spring bolts)... Some axle repairs require the axle assembly to hang freely so you can't jack up or put jackstands under the rear axle beam itself.
@Sellthoseflippingcars2 жыл бұрын
You are most welcome and great question! You will use the most rear part of your frame when doing any rear axle work. When installing a hitch you will be able to use the rear axle as your jack stand point. Thanks for watching!
@user-ok8bi8zc4i5 ай бұрын
Can you show me how to remove a gas tank from a 2006 Dodge Grand
@Sellthoseflippingcars5 ай бұрын
I do not have a 2006 year specifically but I do have the 2000 Dodge Grand Caravan and this will give you a great idea of how to remove your fuel tank from your 2006 Dodge Grand Caravan. Hope this helps and thank you for watching
@kyttenhinson3963 Жыл бұрын
Thank I was stuck @ i got the tire off
@Sellthoseflippingcars Жыл бұрын
Are you good now? Let me know if you have any questions Kytten and thank you for watching!!
@socallone Жыл бұрын
Correct You're supposed to lift at the frame
@Sellthoseflippingcars Жыл бұрын
Thanks for confirming!
@jwykert5132 жыл бұрын
What points of contact are recommended for a lift?
@Sellthoseflippingcars2 жыл бұрын
A hydraulic lift? You will place those under the side rails on the side of the vehicle.
@charlesh-bey564 Жыл бұрын
I'm sorry I asked you a question about my 2007 Dodge Grand caravan I wanted to know how to replace the red leaf spring bracket and Pushing
@Sellthoseflippingcars Жыл бұрын
That is a great idea for a video Charles!!! I will see if I can find a 2007 Dodge Grand Caravan to do that video on. Stay tuned for more DIY Auto Repair here on the channel!!