07376369067 www.williamsmobileclutch.co.uk Support the Channel Donate: www.paypal.com/donate?hosted_...
Пікірлер: 196
@richardhemingway60844 жыл бұрын
Excellent video. No silly music, no useless narration, just plain simple, "this is how you do it, watch". Very refreshing.
@Whoopwhoop173 ай бұрын
Cheers, pal. £375 in garage I did it myself after watch8ng your video, and it cost me £72 for a clutch. I already had most of the tools
@alessandrer36164 жыл бұрын
The best mechanic in UK ! Thanks for sharing ! Good job man !
@WMCS4 жыл бұрын
Alexandru Budescu thanks as always for your continued support.
@ronniebarnard1595 ай бұрын
Were is it u live im in the Wolverhampton area looking for some one to do my clutch on the same car 1.6 petrol
@syncrosimon4 жыл бұрын
On a rainy cold day you show true grit, really impressed with your work ethic. Keeping track of all the different bolts on the gearbox to engine mounts is a pain. I have only ever changed two clutch’s and both took all day😫😫 I would much rather give the job to you. Thanks for taking the time to film, not easy.
@Khauff14 жыл бұрын
Not used you before but from your work ethics top job bruv. You even used a thin punch to knock the bolt through preventing damage to threads whilst in the rain. Most people would have just hammered it out without the punch and without care. Well done 👍🏽
@garrynutter8604 жыл бұрын
You sure are some fella, Dedicated working in the rain. Well done mate. Keep inspiring us with you dedication. Thanks
@alanblack95404 жыл бұрын
Not the worst clutch to do........indoors, or on a ramp, or on a good day!! That just looked awful in that weather. I admire your work and work ethic. Your tools and you need a good drying out after that. Thanks for sharing.
@AlphaXX443 жыл бұрын
On German Zafira Boards, everyone is Like "mimimi you cant do this without droping the frame" I did this years ago just Like you... Have to do it again this week. Your Video is very helpful to make it easier for me remembering how its done
@WMCS3 жыл бұрын
Alpha glad to hear this video will come in handy for you..., always more than one way to skin a cat. ✨✨
@hrenmorzovi3 жыл бұрын
На дизельной 1,9 хватит места не ронять рамку? Там кпп 6.
@joshbaker97743 жыл бұрын
Been using this video as a step by guide to o my own clutch, with hardly any previous mechanical experience. Easy to follow and no babbling commenty to confuse things. Thank You
@WMCS3 жыл бұрын
Josh thanks a lot for taking time to leave a feedback. I love hearing DIY mechanic that takes the leap .,, that’s why I made the videos.., good effort.
@derekjust5764 Жыл бұрын
Was a mechanic 30 years ago. I managed to get a ramp and tools. Your video was invaluable in clutch replacement. Even blew minds of mechanics when no need to remove subframe as they had done previously,also had a giggle when they asked me if I required socket to remove driveshaft from hub😂. Only niggly bit was reattached linkage kept managing to put on 360 degrees out😢. Also if this comment helps anyone else on a ramp then do mountings in reverse as in remove top first and install last. Thanks Kevin you made easy work for me.
@WMCS Жыл бұрын
Thankyou for the great feedback. It means a lot coming from a fellow mechanic (not technician 😁).
@derekjust5764 Жыл бұрын
Also got called a technician at one point. Did sound good lol
@Grupa22344 ай бұрын
I have never seen a better and more detailed video. Thank you !!!!
@stephenevans4708 Жыл бұрын
Many thanks for such a detailed video - it gave me the confidence and information I needed to successfully replace the clutch in my Zafira.
@aquahits56743 жыл бұрын
Absolutely my best car fix channel your very skilled person
@richardhemingway60843 жыл бұрын
Excellent video. Gave me confidence to tackle the job myself. I had a knackered gearbox so had to totally remove the old one. Which of course required dropping the whole subframe. Also on the drive, on my back, in the rain.
@WMCS3 жыл бұрын
Richard that’s good going .,, is vehicle back on the road now ..,,
@richardhemingway60843 жыл бұрын
@@WMCS Not quite at the moment. Waiting for the clutch kit to arrive (hopefully tomorrow). Then I can start re-assembly.
@stephendarbey54114 жыл бұрын
Great video. I always thought the Subframe had to be dropped for the Zafira. Put me off completely until now.
@dannzx4 жыл бұрын
great video, as always rain or shine just getting the job done 🔧👍
@sorineldeaconu388 Жыл бұрын
Eres el mejor mecanico que haya visto hasta ahora , felicidades . Me gustan todos tus videos .
@oscarmontero57244 жыл бұрын
5k subscribers. Congrats!
@danielefrancavilla3 жыл бұрын
Thank you so much!! From Italy!!! The rain must have been most annoying!!!
@WMCS3 жыл бұрын
😁✨🍻🍻🕺🏼
@tonyn98584 жыл бұрын
These videos are so helpful mate. Thanks, tony Leics uk
@stefano40174 жыл бұрын
too much respect for tou bro👍🏾💪🏾 thx 4 sharing!!!
@user-cs6us5px1s4 жыл бұрын
another 45mins of my day set aside to look and learn
@ramonv-h57193 жыл бұрын
Your way of saying thanks is different. Hey we lucky yo have this man posting videos to show us what he knows. Knowledge sharing on KZfaq with good and safe methods used that's my kinda channel. 👍It helps us who look for the video, I love Knowledge and the benefit of visual learning for my self do wonders for my memory. Reading it and then applying it can be a bit more tricky at times.
@Lily_mae__2 Жыл бұрын
Great video. Got to do the clucth on mine soon. only ever done a ford focus before. My only thought is lining the clutch not an issue. i used a tool for the focus.
@marcinmorris4 жыл бұрын
Woow...did you ever have like a nice weather? Man outstanding job ;)
@user-bf5pu5ue3b4 жыл бұрын
just wonderful. great job. I will do it soon. thank!
@russats90292 жыл бұрын
I love your videos, and how you take the time to get the camera in such positions where the viewer can see in detail what you are doing.
@WMCS2 жыл бұрын
Thank you.
@Tim88nrw3 жыл бұрын
Good work 👍 and Thank you for another lesson: everything can be possible 😉
@starskstarsk26824 жыл бұрын
Good job m'y friendster !
@jameswilson22966 ай бұрын
Mant thanks. have just used this method to change the crankshaft oil seal. Needed right angled drill to put self tapping screw into old seal so it could be pulled out. Used plate with holes in to press new seal to place using old flywheel bolts
@ramonv-h57193 жыл бұрын
Hey I wanted to thank you for filming horizontally. Thank you also for posting the video and not putting any lame copyright free music.
@WMCS3 жыл бұрын
Don I really appreciate the support and your feedback.., thank you.
@ramonv-h57193 жыл бұрын
I FORGOT to sub yesterday. I saw your reply and I had to sub after that. Your videos has been helpful to me and my desire to do all the repairs maintenance, and modification. I look forward to when you start yo get the Go pro and harness to film from POV and with professional craftsmanship like yours 🙌 👌 Only thing I had a hard time with was how dark some segments got. The bright lighting would be so amazing and would make your production value moving up the ranking to be on par with your mechanical technician knowledge. Big 🧠
@ramonv-h57193 жыл бұрын
@@WMCS Your most welcome Kevin, it helps to be the best mechanic in the UK. Sun shine, rain or, snow don't even slow you down.
@christopherwilding1878 Жыл бұрын
Fantastic video , just had the whole clutch replaced on my zafira 1.6 at the cost of £650 at a garage very expensive but i needed to get it done as i would be lost without a car. 👍👍👍
@derekjust5764 Жыл бұрын
Clutch is 200 trade price
@christopherwilding1878 Жыл бұрын
@@derekjust5764 "£200" but then the labour is the expensive part but you make it look so easy lol. 👍👍👍
@amilzekria66352 жыл бұрын
this was so satisfying to watch😊
@Mattd252 Жыл бұрын
Great video. Very easy to follow. I didn’t envy you working in the rain like that. I’ve been there as well but not for a job as involved as changing the clutch 😂
@WMCS Жыл бұрын
I’ll definitely take a cold day over a rainy day Matt. I’m sure you know exactly what it’s like to have the constant drip that always seems to land right in the eye. 😁
@scottsimpkins9993 Жыл бұрын
Top vid pal respect to ur hard work in rain .. do more vids on other things as well be good ..
@subutay20114 жыл бұрын
thanks brothers for videos
@WMCS4 жыл бұрын
subutay2011 you’re welcome. Thanks for the support
@4642mati4 жыл бұрын
Super film 📼 i pozdrawiam
@hamzamohammad98592 жыл бұрын
Hey Kevin. Your work is inspiring me to start Woking on cars myself . One question . Does ur clutch alignment tool fit in there properly even if you don't take the gearbox fully out or do you have to do it without the tool . Thanks
@simonadventures37272 жыл бұрын
Clutch replacement in the rain? Respect!
@simonadventures37272 жыл бұрын
Do you by any chance know if replacing the clutch your way (without removing the heavy frame underneath) works with an Astra H 1,6 Petrol/5 Speed too? As of what I heard it works with some engine/gearbox combos while it doesn't with others ... Cheers!
@fredbreuer5504 Жыл бұрын
Amazing job conducted in this rainy land of yours! I wonder how many managed to align the clutch plate in the center. If I may I would suggest you get rather high quality jack stands. Other than that keep up your amazing work!
@techmc_232611 ай бұрын
Thank You so much . I thought that i have to take of all the front chassis
@timmiskin37502 жыл бұрын
Great video as always. I'm looking to replace the gearbox on my 2006 1.6 zafira. Is there enough room to drop the box completely without dropping the subfame?
@sudinebabz86514 жыл бұрын
Très bien 👍🏽 super !
@TheCrackentone3 жыл бұрын
Thon boy knows his onions... Lol... A master at work.
@waynenewcombe81843 жыл бұрын
Impressive 👌cracking footage too👌
@emilianobouzo82634 жыл бұрын
Is It the f17/5 gearbox? Could you give me the reference of the clutch? Thanks and amazing job.. i thought that need remove the subframe. I've got an Astra with the sale engine
@oscarmontero57244 жыл бұрын
Really good! No gearbox drain this time and no tool for clutch center needed. Interesting! Your tray for tools seemed to be a swimming pool... Hope good weather comes soon. I still like more the old intro. Thanks for the video!
@WMCS4 жыл бұрын
Oscar Montero good observation... these gearboxes doesn’t have a drain plug. If the correct level of oil is in there it shouldn’t spill out. It stays down in the gearbox sump. As you’ve pointed out no clutch tool required due to the flywheel design. The clutch sits inside the flywheel and the pressure plate slots in and centres itself with the 3 side slots. Thanks for your continuous input on the videos. I’ll try and come up with a more retro intro for next season. 😁
@bquadrat46282 жыл бұрын
Great! My next project!
@mustaphab34394 жыл бұрын
hey kevin you are top and you are addicted to see all your videos. Question: with which product do you clean everything?
@WMCS4 жыл бұрын
Mustapha B it’s any simple solvent. But I use brake cleaner mostly as it’s readily available from my local part shop.
@michaelduncan59482 жыл бұрын
Great video, the only thing I didn't see you do, is line the new clutch up?
@stuartroberts253729 күн бұрын
Very good video step by step ive got to change clutch on same engine wasnt looking forward to it thought the subframe had to come out how long did it take in total ??
@carlesgirona90634 жыл бұрын
Good job although from what I see time has not accompanied him. thanks for sharing.
@WMCS4 жыл бұрын
carles Girona thanks for the support. It was a bit of a wet day. But not bad enough to stop a day’s work. 😁
@talat034 жыл бұрын
Très bien
@user-ll6wv8wg8s9 ай бұрын
THAT"S THE WAY TO DO IT
@bernarddavies41455 ай бұрын
I'm planning to do the cluch on my zafira next weekend. Im thinking "obviously " or not . The oil lost from the gear box when pulling the drive shafts must be replaced, surely?...How much and how do you go about it. Thank you for the video. Sure, it will come in very useful.
@countryofblindness13514 жыл бұрын
thunk you
@roarkrutherford55833 жыл бұрын
Brilliant video Kevin, really clear and helpful! I'm doing my clutch this week after problems selecting gears. Adjusted and greased the linkage, checked gear oil level, no improvement, but can get all gears by matching engine to road speed with the accelerator pedal (e.g. not using clutch pedal). Workshop manual says i need to support engine and remove subframe for access, but you had enough clearance not to do that?
@WMCS3 жыл бұрын
Definitely sounds like the pressure plate. I’ve never really had any reasons to remove subframe. The video will guide you. Let us know how you get on.
@roarkrutherford55833 жыл бұрын
@@WMCS Fitted the new clutch today, plain sailing except i couldn't prise the clutch fluid pipe off the bellhousing - didn't realise there was a spring clip on it, until i watched your other video on a 2007 1.6 Zafira where you approach it from underneath and the damn clip is clearly visible! Thanks for what you do Kevin, great videos and so generous of you to take the time to make and post them.
@grzegorztulisz91964 жыл бұрын
kozak
@mechanick10003 жыл бұрын
oh the memories of working on your back under a customers car in the pissing rain
@WMCS3 жыл бұрын
Do you miss it. Tell the truth now 😆😁🍺
@mechanick10003 жыл бұрын
@@WMCS not one bit lol
@cogotepao3 жыл бұрын
Nice job Kevin; looks like the rear main seal is in bad condition.
@castrolgtx50644 жыл бұрын
Nice one Kev👌 why didn’t you use your clutch alignment tool??
@WMCS4 жыл бұрын
Springer spaniel these flywheel takes the clutch without hardly any movements. And the pressure plate slots in. So they are already aligned once they are in place. Good observation...thanks for your input.
@andy_v44434 жыл бұрын
excellent
@danielkeens82294 жыл бұрын
Love your videos, were do you get and what make are your orange gloves 👍
@joeharper17104 жыл бұрын
Sure they are würth
@connornisbet2 жыл бұрын
Hi doing much clutch on axle stand turns out worst idea ever lol but keep on doing it. I need you help see the wee silver guides I can't get both to line up can get the left side to line up but not the right side any tips for putting the box back in thanks realy stuck
@nicknix394 Жыл бұрын
Hi Kevin, great work. Is this the same process for a Zafira A (2003) 1.8? No need to slacken/remove the subframe?
@WMCS Жыл бұрын
Exactly the same.
@train49054 жыл бұрын
An absolutely superb job sir.blooming well done in those wet conditions. May i please ask you,were did you buy the black rubber interlocking ground Matt's.a great idea.thankyou.
@WMCS4 жыл бұрын
Stephen Allen thanks for the feedback. I get them from Halfords. Worth every penny
@train49054 жыл бұрын
@@WMCS thankyou loads Kevin.much appreciated.
@Brad-lt6mr4 жыл бұрын
Didn't fancy doing the crank seal?
@MrMegaOliwer4 жыл бұрын
What sort of cleaner are you spraying?
@joshuamorton5101 Жыл бұрын
Hi kev few questions what socket star head do I need an spanners size mine is a zafira 55plat petrol 1.6 and how much is that part
@properjob79704 жыл бұрын
Hi thanks for your video, just like to ask would the gear linkage need re alignment? Thanks Darran
@WMCS4 жыл бұрын
Hi Darran..,, on this vehicle model it doesn’t. They are fixed length..,
@traconitide3 жыл бұрын
What liquid you use for cleaning the gear box? Thank you very much for you good work!!!
@WMCS3 жыл бұрын
Hi David .., it’s only brake cleaner .., any solvent will work just as good.
@Amigo-hl6ht3 жыл бұрын
Super film 👌👌👌👌👌👌
@cornelisemail60704 жыл бұрын
Its the first time i see gear oil dripping out?
@ehsanabbas24864 жыл бұрын
Hi you did not drain the gear oil why?
@nourmaw49734 жыл бұрын
👍👍👍👍
@maxov7007 ай бұрын
Hi Kevin, thanks for the video. I've the Z18XER, little bit different but the complexity is the same I think. How about the Flywheel ? Some people says is not necessary to change it cause is a "normal" one and not a dual mass. My car have 310 000km (Astra H GTC)
@WMCS7 ай бұрын
That’s correct. Replacement not required.
@oliveromsberg19763 ай бұрын
What is the liquid used to spray the clutch? That is rinsed off?
@jeffersonelias74472 жыл бұрын
Would it be similar for the Astra H 2006 1.4 petrol? Your help would be much appreciated. Best regards
@SuperBC10 Жыл бұрын
Quick question. When you tapped the inner part of the driveshaft/cv joint to remove it from the gearbox, what were you tapping exactly? Was it the circlip that helps hold it in place? Thanks.
@SuperBC10 Жыл бұрын
To answer myself, I just looked again and it must have just been a tap on the driveshaft as the circlip is way too far in to get at. Thanks for this vid. Am gonna tackle this job myself soon on my Zafira A 1.6. Still going strong at over 180k and 24 years old. Not bad for a car that most people would have scrapped a long time ago.
@WMCS Жыл бұрын
That’s correct.
@bigearedmouse172 жыл бұрын
Can I book mine in Tuesday Morning about 9am ?
@hrenmorzovi3 жыл бұрын
На дизельной 1,9 хватит места не ронять рамку? Там кпп 6.
@ESSA203 жыл бұрын
Hey Kevin, just wanted to ask dont you use the clutch alignment tool?
@WMCS3 жыл бұрын
Hi Essa.., sometimes if the spot is tight then i finger it in place ..,,✨✨
@WMCS3 жыл бұрын
Check the repair in the next 5 mins.., another example of finger alignment ...
@cornelisemail60702 жыл бұрын
With my Astra H 1.6 when I remove the hydraulic pressure bearing the gearbox oil dripping fast out.
@youbreakemwefixem72094 жыл бұрын
Pulling gearboxes on your back, in the pissing rain...there's gotta be an easier way to make a few quid! That said, I like the floor tiles. Good idea. Beats lying on concrete!
@youbreakemwefixem72094 жыл бұрын
@@patrickhickey8647 young man's game! I'm a little bit older 😀
@marijanmarijan10734 жыл бұрын
Hello Kevin please have some space music in the background, My Laguna is waiting for you as an exercise model
@surachai434 жыл бұрын
What model Milwaukee do you use?
@scottsimpkins999311 ай бұрын
Does it matter if fly wheels turns as undoing bolts like in this vid.. thanks
@WMCS11 ай бұрын
As long as it’s not turning opposite to the engine rotation
@diyandamyanov26993 жыл бұрын
Hi Kevin, thank you for the video. I tried to replace the clutch, but i have difficulty to re-insert the gear box. How do i align the clutch with fingers? Or if there is any trick ? Thanks again.
@WMCS3 жыл бұрын
Very unlikely it’ll be the clutch that’s misaligned. There is a plastic lug fixing the top bell housing to the coolant pipe. Most likely that’s in the way of the gearbox mating back .,,
@diyandamyanov26993 жыл бұрын
@@WMCS Thank you Kevin, i'm going back to continue, will write on the outcome. Have a goog day.
@diyandamyanov26993 жыл бұрын
Hi Kevin, i finally assembled the car. The gear box was not fitting because the disc was not aligned. I didn't buy SACHS, but i bought from autodoc cheaper version - Ridex. The clutch disc is actually 7mm smaller in diameter, hence more movement and misalignment. I positioned in the center and then tighten up the pressure plate bolts. The gear box fitted easy. I had problem removing the air, till i figure out the reservoir has to be full to the top. Unfortunately, the new clutch is slipping in the same way as the old one ... Do you have suggestion what might be the cause? Thank you for your help and willingness to share knowledge and experience.
@diyandamyanov26993 жыл бұрын
Hi Kevin, I found my mistake, after engine number 20KC2905 the clutch and slave cylinder are different and i have ordered the wrong one. Now i'm ordering correct kit and this weekend will be clutch exchange again. Thank you again for your video, help and sharing knowledge and experience
@560smr4 Жыл бұрын
Could I as how much you charged for replacing the clutch. As I have the same zafira and the clutch is on its way out.. Thanks james
@WMCS Жыл бұрын
www.williamsmobileclutch.co.uk
@thpxs05544 ай бұрын
Great job, take off the bare minimum to get the job done, but I didn’t see how you centred the plate ? Did I miss something.
@WMCS4 ай бұрын
If you subscribe you can access channel playlist for more detailed repairs. 🍻🍻
@kylemclachlan11764 жыл бұрын
How do you keep track of your tools to save you losing them? Any tips ?
@WMCS4 жыл бұрын
Kyle Mclachlan I keep them in the tray. And after the gearbox goes back in i start putting them back slowly.
@kylemclachlan11764 жыл бұрын
@@WMCScheers 👍 have you lost any tools in the past ?
@WMCS4 жыл бұрын
Kyle Mclachlan maybe back in the day ... but all tools are accounted for at the end of each repair. They are all in Slotted trays so it’s easy to spot any missing ones.
@Amigo-hl6ht3 жыл бұрын
Hello, Mr. Opel Zafira 1.6 2000 petrol, the clutch can be replaced in the same way
@WMCS3 жыл бұрын
Yes exactly the same way.
@marinalexandru57142 жыл бұрын
How much it is replacing a cluch?
@spencerburrows35254 жыл бұрын
What is the liquid at 16:07 onwards you are spraying in?
@WMCS4 жыл бұрын
Brake cleaner.
@divierteknia4 жыл бұрын
Good mecanic, but usually bad weather... More difficilult work. Didactic videos !!
@WMCS4 жыл бұрын
Divierteknia weather was not great. But repair was successful.... thanks for the support.
@mac80503 жыл бұрын
Hi do you reckon its possible to remove the box without dropping the subframe ?
@WMCS3 жыл бұрын
Definitely.,, I’ve done it many times. Especially with the M32 box. All you need to do is slacken the opposite subframe and you’ll have enough room to pull it out.
@mac80503 жыл бұрын
@@WMCS do you mean slacken the rear of the subframe? ill be doing it on an astra H ? thanks for your vids, there very helpful.
@WMCS3 жыл бұрын
Remove gearbox side completely. Then slacken the driver’s side about halfway out. What’s the engine size of your vehicle.
@mac80503 жыл бұрын
@@WMCS 1.6
@user-ox4eu3xi3s4 жыл бұрын
hey, is that a clark jack similar to the sgs 3 ton ones you can get for £70-80? my jacks bust and need a semi decent one for not to expensive . just checked your website and the amount of 5 star reviews you have! clearly do a good job inc the things people don't see like cleaning up ect.
@WMCS4 жыл бұрын
you tube thanks for the review. Much appreciated. This jack I’ve been using for about 5 years now it’s a 3 tonne sealey pro. So are all of my tools. Don’t cost the earth but keeps going. They sell for about £90 with trade discount from euro car parts. I try and keep my work professional. Always tidy. Not a drop of oil on driveway. You’re right you can’t see that in the video. If I’m taking someone’s hard earned cash I make sure that they get a good service in return including being polite.
@tonyn98584 жыл бұрын
@@WMCS I've had my Sealey pro jack for 25 years now mate. I've not had to change the seals yet great jack. Tony DIY mechanic.
@WMCS4 жыл бұрын
tony n honestly that jack has been through both world wars 🤣😂😂.., still going strong. It’s a proper lump of metal tho ..,
@user-ox4eu3xi3s4 жыл бұрын
@@WMCS you should do a tool box tour! always interested in seeing what tools people have / use, some times reminds me of an item i need to pick up my self haha
@WMCS4 жыл бұрын
you tube I’ll try and do a small tour this weekend
@jimspiers43424 жыл бұрын
Hi Kevin are rover clutches easy ? Great work m8
@WMCS4 жыл бұрын
jim spiers very easy and very straight forward. What river is your one.
@jimspiers43424 жыл бұрын
@@WMCS it's a rover 45 1.4
@Dinger1544 жыл бұрын
Bloody hell mate, be careful you don't wreck your health working in conditions like that.
@connornisbet2 жыл бұрын
What's the tool your using when separating the ball joint at the axle
@WMCS2 жыл бұрын
A chisel
@connornisbet2 жыл бұрын
@@WMCS that's the name was sitting there absolutely brain dead