2006-11 Honda Civic 1.8l check engine, VTec valve replacement/detailed

Рет қаралды 20,671

3 жыл бұрын

Check engine light-Code p2646 and p2647
0-1:52 Diagnose
1:52-5:02 Step by Step to remove.
5:02-7:20 Step By Step replace/reassemble.
7:20-End Test drive

Пікірлер: 27

@DominickAmorosano 3 ай бұрын

Excellent video. Step by step instructions are fantastic.

@AdnanKhan-lu9yh Жыл бұрын

A very good teacher. 👍 You should make more videos and start a course to train DIYs in your school.

@juliocs5483 Жыл бұрын

Can’t wait to replace mine!

@MrHuck 2 жыл бұрын

Just put a gasket on mine. Taking the cowl off first helped a lot. Last weekend put gasket on valve cover and check valve adjustments. My issue was oil leaking. Hopefully I’m good for a long time.

@garyusaraga3267 Жыл бұрын

I had mine with the same problem and code. First i resetted by OBD2 scanner then came again. I unhooked battery cable but still the same code appear. Finally I removed the VTEC assembly, replace the filter and thoroughly clean the inside with throttle body cleaner. So far so good until now.

@themaxilove9265 Жыл бұрын

Congratulation Man, you are the best

@brentjodrey5114 Жыл бұрын

excellent video.

@rolannandlal4369 Жыл бұрын

Thank you for this video

@HaHa-yq8hi Жыл бұрын

Thank you so much!!

@evaserrato341 2 жыл бұрын

Nice thanks

@stangbang100 2 жыл бұрын

This helped a ton! I'd removed the vtec valve due to a bad oil leak and replaced the gasket and reinstalled..next day noticed first that cruise control wouldn't work, then car would stutter while accelerating. Long story short I just forgot to plug one of the sensors in.

@danielpinacarballo3337 Жыл бұрын

This comment made my day I feel your pain brother

@ottoniellucas5872 2 жыл бұрын

Thanks bro for this video You help me thanks 🙏

@mikethompson3534 8 ай бұрын

Thank you 👍

@danscreativespace 2 жыл бұрын

I’m getting a p2647 code on my 04 Honda Civic but my engine is not equipped with a vtec solenoid. The code is reading a stick rocker arm. Any ideas on this?

@angle12-h9k 2 жыл бұрын

My code was the same I changed the whole assembly and my check engine light is still on any thoughts?

@meronheedo 2 жыл бұрын

4:20 Thanks for the tip about using a 6 point socket on the bottom bolt. I had been using a 12 point socket and it kept slipping off due to the weird angle. I wasn't replacing the whole valve--just the gasket--but your video was very helpful for that part in particular.

@cristianledesma7482 2 жыл бұрын

I was going this blind I put all three bolts back in cause I couldn’t reach the bottom one with out taking the cover he took off at the beginning. I’m try again

@brentjodrey5114 Жыл бұрын

how do I get it off ugh

@EddieTee321 Жыл бұрын

Would this engine be considered a SOHC vtec engine?

@ericksandoval5201 2 жыл бұрын

Hi, I just did that But I replace just the gasket And check engine still on Any suggestions..?

@lagostech4864 2 жыл бұрын

You need to change the valve

@lafete6863 10 ай бұрын

Do you have to change oil after replacing this thing ?

@ivanxva 5 ай бұрын

My mechanic recommended not to unless you check the oil level with the dipstick and it clearly looks to be pretty minimal.

@Oszysr 2 жыл бұрын

Would you please provide the estimated time it took you to do the complete job? I will have to take the car to the mechanic to get this done and want to have a +/- idea on what he will charge me. Thanks, greats video.

@Omegax34 2 жыл бұрын

I could be wrong but if the part is around 200 and it looks like a 1-2 hour of work depending on the mechanic. I’d range cost to be 400-500

@iprophecy6768 2 ай бұрын

Yup, never ever get a non OEM part for these 8th gen civics. You will pay for it. If you gotta replace anything, buy it directly from honda. These cars do not react well to aftermarket shit.