is it just me or are real analog gauges just 200x more satisfying to look at vs the crappy digital displays they use nowdays?

Great straightforward video.

dont forget to mention 07 classic Silverado

very in-depth. good video!

I have same set up with the fogs included. Had it for over a year and love it. Auxbeam is good quality light

I've got a 2007 Classic, and I installed low beams the other day. Not enough clearance. I ended up having to use a dremmel and cutting out holes behind them in the plastic to make them fit better. The head sink was just too large. I also had to remove my grill in order to put the headlight directly in instead of wiggling it behind the grill. They are a tight squeeze, but they do work. I still had to force them to get them in the hole I made, but once in place, they fit with clearance. And yes, your low beam driver side should sit slightly lower than the low beam passenger side light by design. It is this way on all vehicles to illuminate road signs on the passenger side, and to keep from blinding on coming traffic on the driver side. I'd noticed it before, but not thought much about it until I installed LED's.

Thanks buddy

Did you have any problem with the plastic behind the high and low beams melting?

GR, it's been a year, those bulbs still work? I've only seen this vid, what headlight assembly is that you upgraded to? they're good fit not loose, lights not melting them at all?

I was able to replace the flasher on my '06 Sierra a few years back without removing the knee bolster. Just had to reach quite aways back. I wish vehicles still had a flasher unit, instead of using resistors. The flash rates are now controlled by the BCM.

If you only concert the front to led, will you have that issue??

Those sound just like the 3" tips

I bought some other brand turning signalof led bulbs and there not working properly .

Did u have a 194 bulb in your taillights? I didn't see it on yours.

Very nice!!!

The requisite silverado steering rattle

Nice video man should’ve went with led switchback for front turn signals and just need the 4 high mod

Where did u get the headlights??

hows that radio working out? I just purchased a super clean 2003 2500hd, unfortunately it has a couple of blown speakers and the radio doesn't even have a tape or cd player lol. I like the stock look of those updated Bluetooth radios.

How many videos b4 you upgrade to a Gopro with a head mount so you can use BOTH HANDS!!!

I cannot find a replacement led 194 to fit in my marker light hole on my 2006.

Hello Grayson, did you add the CANBUS driver for the Auxbeams?

I got some leds and they are to big in the back to put back on the high beams. Should I just cut it out the way??

You know you dont have to take the dash apart to replace that flasher. I did mine in just 1-2 min. I just went under the dash and just pulled the flasher out by hand.

Hope you can answer this please. I have a 2005 Silverado. My friend gave me a pair of SynteticUSA 9006 LED bulbs but they hit the radiator support cross member when I try to re-install the headlight assembly. Did you have any interference issues with the Auxbeam bulbs? I really hate to start cutting up my cross member.

I love how that truck sounds

Did u drill hole for the headlights

I was gonna say watch out for the over zealous MPs to pull you over for using your cam while driving. Then I noticed where you are actually located, and I assume you are SecFo so then you don't have to worry about it!

I just replaced all of my lights last night and had the novita flasher, but when I put the rear turn signals in, all of the turn signals will stay on constantly, and when I try to use the turn signal, it doesn't work.

Great installation video but kinda shaky video but anyways....why don’t you do a 6 high mod.??

where did you pick up all your led bulbs?

Have LED bulbs for both low & high beam. The low beams work fine. Issue is when I engage the lever for high beams they do not come on. If i hold the lever in they stay on. Any help on what I can do to resolve this. Thx

Grayson where did you get the led bulbs for the tail lights and turn signals?

So how are they holding up? Still working?

gah...fuck that I'm not tearing my dash apart for this!

Do you blind the oncoming traffic with those LEDs in your stock headlights ? I heard you need to buy aftermarket projectors so when you put LEDs they dont blind oncoming traffic.

A dashboard led conversation would look better on your truck...

Hello, Grayson, we are from Alla Lighting, and we are specialized in auto led lights bulbs, are you interested to test our premium quality led bulbs? if so, please let us know, thanks in advance.

Dude ! Get a tripod, or a camera person. While doing it one handed you either miss the shot, or risk breaking something

Should've have just put in all led tail lights.

$30 = tripod for camera

My h.i.d are twice as bright, I have the 5000k. Dumb those leds and get h.i.d

buy go pro at least..changing lights are easy why waist the time making a video