Going to try this on my own , 65 years old and still doing my own work , what doesn’t kill ya will only make ya stronger, great video,

I just did this today. Thanks to this video there was no hidden issues. Very straightforward thank you!

Very impressive how you do this job on the driveway!

There is so much I'd like to say about the quality and detail of this vid but really .....FANTASTIC sums it up nicely. Your abilities are truly under rated. Just about to start on the wifes car over here in NZ. Cheers Kevin

i like your video no talking , plain works. watching from Philippines

Eine super Anleitung für meinen Swift 1.3 AMT, nun habe ich den Mut es selber zu reparieren. Werkzeug und Hebebühne ist vorhanden. Mach weiter so, das gefällt mit gut👍

This video was a God send. Thank you. I had to replace a rusted out subframe too and this gave even better access.

Another top video as always Kevin! Good to see your still keeping busy!

Love how he's just doing it 💯💯💯 taking mines out tomorrow

I finally got round to doing the clutch swap last week and got into some positions I never thought possible at my tender age😂. Thank you Kevin for this detailed video, without it I'd have been lost. Anyone else thinking of taking it on there's a lot to do before the clutch housing comes off but follow this step by step video and you too will achieve your goal 😊. Now where did that last bolt go 🔧

For a small car , they are a pain in the arse the Suzuki Swift , have done a few of these Kevin , a ridiculous amount of bolts for such a tiny car , not nice to do , saw that leg kicking up there Bud , great video and great camera work as usual , keep up the good work and stay safe 👍😎

👍🏽 the clutches warrior 👏

Fantastic video no need for commentary,you let your work do the talking First class

The work you do is super and it shows sincerity

So much work involved I was gonna try do my niece's clutch never done one before. But after watching this I might send it to a pro I'd be able to strip it down no problems but put it back together is another story

This is what I was looking for ... Thanks .. Greetings from Poland👍💪💪💪🇵🇱

whoaa!! Bravo my friend...BRAVO !! even watching the whole video made me tired... i can't imagine the amount of effort and consistency it takes for guys like you to replace the damn clutch : ( BTW, i own a same Swift...and it needs clutch set replacement now : ( ....

Bonjour Kevin,je me suis abonné à ta chaine ,et que dire !! tu es vraiment au top ,le travail que tu fait est vraiment impressionnant et tu gères (sur le bord de la route si on peut dire)+++++++++++++++++++++

Thank you for this guide. I did my 05 swift today without any problems thanks to this

I've got to do my daughters swift soon, all looks straight forward. Thanks for posting.

Ahhhh my Friends....the n'est mechanics of the Europe.... thanks you for this clip

Great video. Half way through ours so far. My old shoulders arent up to he-man lifting the gearbox back in like you have, but i cant get it to work on the jack either.

اتمنى لك التوفيق والنجاح في كل ما تريد، كل الفديوهات رائعة ولها تصوير دقيق لكل المعطيات... شكرا جزيلا على كل المعلومات المفيدة عبدالرحمان من الجزائر

even with this amazing video, i still wont attempt this,, great job !!

De los mejores videos que he visto en en toda mi vida en KZfaq, Gracias! Saludos desde Perú

Le mec est bon il fait ça en presque 1heures les yeux ferm. en tout cas merci cette video m'aide beaucoup pour réaliser la meme operation

A TRULY excellent video presentation. Could not be better. Thank you.

Really interesting watching you do that👍 surprised to see that the original clutch was a exedy clutch.

Made it look easy. The kind of job I think I'll do in no time, then it ends up taking 12 hours over two days...

Ate q enfim saiu video !!!

Your video is really helpful and made the job easier. Thanks Kevin

Excellent DIY Video...Greetings from India..

Thanks for the detailed video! Got to do this on my girlfriends Suzuki this weekend on the “driveway”. Good to know I don’t have to move the subframe or anything! How many Nm was the torque on the pressure plate? Three ugga dugga’s and a sinch with a 1/2 inch? Perfect! 👌

Hi, I've not done a fwd clutch before but feeling pretty confident after watching this, thanks! I'm replacing the clutch in a 1.3 Ignis, have you done one? Do you know if there are any differences, aside from the battery tray and a cable clutch?

Top man! Thank you for your work!

Thanks for the informative step by step vid, just finished one of the same.

Thanks for the video! It’s exactly what I needed to change the clutch in my wife’s car. I’m assuming a wheel alignment is required after this right?

Hi Kevin! Very good straight to the point video. I was wondering if you remember where you bought the angle attachment for your impact gun and also the clutch plate holder you use?

Respect Bro Üdvözöllek Magyarországról 🇭🇺😉🙋🏻‍♂️

Too bad you havent checked the rear main seal behind flywheel. Btw also how did you block the engine from spinning when you were torquing the bolts on clutch pressure plate?

Thanks. Much appreciated. All went well. Well detailed video. Thank you

So impressed , what a first rate video.!

Great video and looks straight forward to follow. I have to do our swift next week and just wondered how much gear oil did you top up with @51:40 Thanks in advance and keep up the great work 🙂

Gracias! Master.pura calidad Grande maestro. Desde chile , Chileno de corazón, 8_2021

Hope youre well kev, not been able to watch as many vids as id like too as super busy at work. Keep it up👍

i need a new clutch in my swift... whats the cost not including the clutch and where are you based? thanks

Awesome work mate! Thanks for sharing, I’m replacing the clutch in my M16a, first time doing it so see how we go. What was the tool you used when putting the new clutch in, Cheers from New Zealand 🇳🇿

Excellent video for DIY mechanics :D

Awesome video ...... Hi just a question I got my daughters clutch replaced and the clutch pedal is still the same as it was before the replacement clutch kit went in, The pedal takes up about 3/4 of the travel up from the firewall and it starts to grab, and to me that doesn't feel right as it should take up about 2 inches off the ground ..Is the thrust bearing not adjusted properly or something else as the workshop said its correct the way it is ..Well i don't think so cause it another year it would be slipping again as there isn't enough free play to travel on the kit for adjustment ..Thank you

Hi Kevin,thinking of doing our Suzuki Liana hatch back.Just wondering about how long did it take you to do the job?.So I have an idea of how much a mechanic would take.And also if i did it im sure it would take 4times longer.Cheers.

great video, very helpful!

Hello what kind of grease fat you use the red oke you did use is on the Volkswagen transporter t5 2.5 tdi nice work you do always

Excellent video,top technician!

Muy bueno tú vídeo abrazo grande desde Tucumán Argentina.

Sin duda un fenómeno,podrías decir referencias del embrague,gracias por tus videos me an servido para hacer embragues,un saludo

Nice. Is there lot of rust underfloor of thats years Swifts?

Bonjour tu utilise quelle produit pour le nettoyage de tes pièce continue comme ça pour tes vidéo

It's great how you do this and video it all. Only question from me is what about using a torque wrench to correctly torque all the fixings. I don't see you doing this anywhere so how are you managing this?

Üdv! Nagyon profi vagy!

Excellent video, helped me lots. Are the exedy clutches any good?

Cool, il faut continuer comme ça 👌😉 J'ai pris pour habitude de remplacer les joints SPY à chaque fois. Qu'en pensez-vous ?

Geiles Video 👍 muss ich diese Woche auch machen gute Anleitung😂👍

During this operation will you also touch the air conditioning compressor??? After the mechanic redid the clutch on this Swift model, I noticed the noisy air conditioning compressor during loading, audible especially in low gears. As soon as I turn off the A/C everything disappears.

bon travail bravo comme toujours

Excelent my friend very good video thanks

For this car, can leaking oil from gearbox cause clutch not to release fully or not engage into first gear?

Thanks for sharing such a useful video

Wow, nice work...but I still afraid to it, especially reattached gearbox to the engine...looks very hard to align to fit in.

Good job!!!!!Bravo

Fantastic!! 🙏

Do you have to pay a core charge up front on them clutches first? Then return the old ones for credit back on them. Or do they even want the old ones back..Just wondering as I noticed you set up your work schedule for the week. In advance...

You think the zs32c (2012) 1.6L sport engine is about the same thing? It has a hydraulic clutch.

Very nice and detailed video. Thank you bro

Hey Kev, I have recently changed my clutch on a Suzuki SX4 1.6 liter petrol, and now when I keep the clutch pedal pressed for a few seconds it hears from the gearbox like a whistle sound. Do you have any idea what's the reason? thanks, and all do respect for your work man❄️❄️❄️❄️

Hi I put a new clutch my Suzuki swift it’s hard to get gears only when I pull pedal a few times it goes into gear external slave cylinder give both?

Hey Kevin what fluid did you pump into the bell housing. Am new to clutch replacements.

Thanks for the video.

Gracias maestro

Hey kev have you ever done a clutch on semi automatic 2010 pug 3008 diesel? It's got a normal single clutch. I got one in and the book is telling me to remove the engine.

Hello Kevin, Nice video as usual. Is there a chance you do a Peugeot 208 in the near future ? Thanks.

Good video. Concise

The best

Hey Kevin what were some systems that made you realize the clutch needed changing ?

which is best clutch for swift LUK vs Exedy vs sachs ? if price not issue? just need strong reliable clutch and best quality !

Going to do same on 1.3, hope this is the same.

Hola amigos me gusta tu video un saludo de madrid ,

which degrease you use to clean? it's so good! Thnks

Лучшее видео в мире

How many hours did the job take ? Now i´m motivated to try this on Swift IV 2013 :)

Fantastic, grt!

Thanks good information 👍👍👍👌👌👌🇮🇳🇮🇳

Why didn't you out grease on the input shaft/release bearing sleeve ?

top video

Thank you so much 🙏 great video.

Bravo Kevin

Hello my friend .good job

Nice work 👌👍👍💪💪💪

It's amazing

do you mind telling me what impact gun that is as it seems to do the job lol i had to change the sump on my swift without one and i think its time to invest in one lol

I noticed you didn't get the flywheel machined?? You werent worried about clutch shudder?? Im getting my clutch replaced in a short few days time, same car but im letting the mechanic do it. He said "gotta have the flywheel machined for warranty purpose anyway and he doesnt want the car to experience clutch shudder on take off. He the expert so i just pay for it.