2007 - 2011 Honda CRV Backup Camera install

Рет қаралды 85,398

Күн бұрын

Parts used listed in the description below!
Watch a full tutorial as a 2008 Honda CRV will have a new backup camera installed to an aftermarket radio installed previously. This camera provides additional safety and visibility when reversing.
This video applies to Honda CRV models for years 2007, 2008, 2009, 2010 and 2011. This video also includes camera wiring, radio removal, installation, and testing.
Click here to see the radio install on this CRV:
• 2007 - 2011 Honda CRV ...
Click here to see a helpful backup camera tutorial video:
• Car Backup Cameras Exp...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Backup camera used in this video (Amazon Associate Paid Links):
*License Plate Camera Kit: amzn.to/3wgX9az
Radio install Parts Used (Amazon Associate Paid Links):
*Dual DCPA701 Double Din Radio: amzn.to/3jzm2cF
*Pac HONK817 Double / Single Din Dash Kit (non-paid): www.ebay.com/p/1100615358
*Metra 70-1722 Wiring Harness Adapter: amzn.to/3sqmSO3
*Metra 40-HD10 Antenna Adapter: amzn.to/34UkvGo
*Pac SWI-RC-1 Steering Wheel Control Module: amzn.to/3xsDxzQ
*RCA Cable Adapter: amzn.to/3EYZmvx
-Alternatively- If you want a "plug and Play" harness, use the Crux SWRHN-62B Radio Wiring Harness Adapter. This replaces the need for the Metra 70-1722, Metra 40-HD10, Pac SWI-RC-1, RCA cables: amzn.to/3vXBfIp
*Dual USB Flush Mount Adapter: amzn.to/2URnTA0
Disclosure: As an Amazon Associate I earn from qualifying purchases

Пікірлер: 48

@ProvoBeastAudio 2 жыл бұрын

Parts used linked in the description of the video!

@daniellesashania7936 2 жыл бұрын

How much is your price for installation ?

@robjodipayne2361 Жыл бұрын

Awesome video, thank you so much. Made it really easy for me to install the camera on my daughter's CRV.

@nintendaholic1 2 жыл бұрын

Thank you so much for this video! Followed it step by step along with the double din install and it’s all running smoothly!

@samuelmitgang1963 5 ай бұрын

Amazingly well detailed video. Couldn’t have found a better one. Thank you.

@JSICycles 2 жыл бұрын

Great video. I will use to change out stereo and add reverse camera to my daughters 2011

@Nimbus12 4 ай бұрын

Dude, that hole under the headliner is a NIGHTMARE

@Nimbus12 4 ай бұрын

It helps to remove the screws under the trunk light lens.

@benchristensen1526 2 жыл бұрын

Look, this video is great, and came at a perfect time for me. Just wish steps weren’t skipped in the footage. Trying to route the wire through the paneling now and I’m having to guess where the clips are and what needs to be removed

@amauris1522 Ай бұрын

Thanks so much for the great and detailed information. I thought that when you say that fishing the wires on the back was the hardest part, it was you exaggerating, but you were not wrong 😢

@matmanscott Жыл бұрын

Well done explaination and video!

@coelmiller7726 2 жыл бұрын

Well explained, thank you

@user-wg6kn5gk8v 9 ай бұрын

Great informative video. Just changed the rear camera with second hand one in under an hour. Saved ££££ on garage costs.

@deadtrollzzgz3472 5 ай бұрын

Hey if you don’t mind me asking since you done this already what do I connect the ground wire to? Because in the video he says connect it to the negative but I seen other say connect it to metal part

@aakudev 6 ай бұрын

Thanks! Only issue is I have had these sort of multiple ones being taken away, way easy to unscrew and snatch away.

@skywalkerallday4953 2 жыл бұрын

Question not for this video, but was doing first car big 3 install and was wondering if the ground for the engine could be on any of the existing bolts

@rueqi3335 Жыл бұрын

Thank you for your video. I follower your guide lines step by step to install an aftermarket backup camera with a build-for-2011 Honda CRV android head unit. I was so happy I had a backup camera to my old car now. But the next day, when I was trying to reset the android unit, the camera screen went black in reverse gear. Would you please advice? Thank you kindly. Happy New Year!

@majhoolmaroof2065 5 ай бұрын

THANK YOU ..THANK YOU ..THANK YOU

@Techgeniusideas 2 жыл бұрын

Great video

@davidbarnes2736 2 жыл бұрын

Hello! Am I seeing this correctly? You need to connect the trigger wire to the power (using reverse light like you) AND connect the other end trigger wire to the purple wire off the radio? Do we have to have both ends connected?

@tessynha Жыл бұрын

The rubber where you passed the cable. Where did you buy and water first come inside the car?

@platinoef332 2 жыл бұрын

I got the situation that I had to replace just the camera and now it’s not working because maybe I got to reset the screen. Have you posted something about it?

@davidmoschkau7439 Ай бұрын

Thanks for your video. I followed it but my camera doesn’t seem to work. I did not pull a power wire all the way to the radio as my system says it’s integrated into the video wire. There is a red tail wire at the end of the yellow video cord that connects to a wire on the radio. How should I troubleshoot this to figure out what’s wrong?

@lect0n7 Ай бұрын

My 2011 Honda CR-V’s aftermarket head unit is getting a Raspberry Pi connected to Video 1 in & it’s gonna play retro games…

@MarinoPortorreal 2 жыл бұрын

Great video! How about the security pin code when you change the battery? Can you change it via the new stereo?

@ProvoBeastAudio 2 жыл бұрын

The security pin is only for the OEM radio, becomes irrelevant when replacing with a new radio. The pin is included with the factory radio in the user manual. If missing, call the dealer.

@Crazyexperience19 22 күн бұрын

I was trying to do it, however after the steps i decided to stop, it will talk me like the whole day.

@naeemhallim3655 Жыл бұрын

Where you located

@musicman940 2 жыл бұрын

Does your phone charge when plugged into the cable for Apple / Android car play?

@ProvoBeastAudio 2 жыл бұрын

100%

@dammcarl 11 ай бұрын

what type of wire did you use to extend the power for the short power power cable?

@slappomatthew 10 ай бұрын

any roughly 18-14 gauge stranded wire should be fine. its nice to use red and black to keep the power and ground straight but color really doesn't matter as long as you dont forget.

@mj3432 Жыл бұрын

Hi. What gauge is the red and black wire?

@ProvoBeastAudio Жыл бұрын

18 Gauge

@poxcr 2 жыл бұрын

Why didn't you paint the bare metal left after drilling the pass thru hole? That spot will be prone to rust.

@alekseyshurtygin2042 2 жыл бұрын

I am about to start the same project. Was wondering if its ok to leave the hole as is without applying anything to prevent rust. Is there anything specific that I should be using?

@unclefreddy2009 Жыл бұрын

I’m not sure it would matter much but you could apply some primer there if you want. He puts a rubber grommet over the drilled hole which will protect it.

@chocc4564 Жыл бұрын

does the ac still works?

@ProvoBeastAudio Жыл бұрын

Yeppers.

@servingourlord Жыл бұрын

Doesn't make sense, looks like you joined both pig tails to the power but if you did that you can't run the video to the front. Also at the front you mentioned a red wire a thick one and that wasn't showen in your beginning parts.

@KentQuickstad Жыл бұрын

I'm slightly confused by your question. On my camera, at the head unit (front) I connect the red wire to +12V ignition wire of head unit, and connect another wire (pink) to the head unit's reverse trigger wire. Then I connect the yellow RCA into the head unit camera in. At the back of the car, I connect the positive pigtail wire (it's red for me) to the reverse light positive, and the other pigtail wire (black for me) to the reverse light ground wire. I didn't join the red power + reverse trigger into a pigtail like he did for this video. Instead, I'm grabbing the trigger from the reverse light wire, and grabbing power from the ignition + off the head unit. Hope that helps.

@alabbssi7188 2 жыл бұрын

Hi sir I need honda CRV 2007 full option car install LCD screen send Ur no mob please

@ProvoBeastAudio 2 жыл бұрын

Not sure what you are asking...

@RaduGiurgiu 2 жыл бұрын

@@ProvoBeastAudio Hello! He ask for your phone number sir...

@phimonline3215 Жыл бұрын

Another question Do I need to connect a little red wire at yellow plug at camera to the red positive wire that connects to reverse light ? Do you think because I didn't connect it that cause a short circuit in my case? Thanks for your time

@phimonline3215 Жыл бұрын

Sorry to ask a question I followed your video to connect android unit for my 2009 honda crv . It worked great but only one part was hooked up the power and ground to reverse light as you showed in this video but whenever I start the car and put into reverse the fuse number 10 with 7.5 amp under dash will be burned out right away and all my dash light off, no power windows either and car can't start , shift gear stucked in park until I replace new fuse again. I have to remove those two wires I tapping into reverse light and everything will work fine again. Any idea that cause this problem. One more thing my tailgate light has some kind of pulse brake device tapping ino it. The 7.5 amp fuse that burned out is meter fuse. Thanks

@ProvoBeastAudio Жыл бұрын

Sounds like a short somewhere. I’d recommend visiting your local audio shop for assistance

@phimonline3215 Жыл бұрын