2008 - 2012 Honda Accord 2.4L PCV Valve Replacement!

Рет қаралды 22,456

Күн бұрын

Welcome back everyone! In this video, Bob shows how to replace the PCV Valve in a 2008 Honda Accord. This guide can also be used in some older Honda vehicles with the 2.4 liter, 4 cylinder engine. Let us know in the comments what you think! Thanks for watching!
Products used in this video:
PCV Valve - amzn.to/3KQMaxx
17MM Deep Socket - amzn.to/3KAU6BY
Deep Socket Set - amzn.to/43joQ2V
Some other items to consider:
Ryobi electric ratchet: amzn.to/3uD4dPp
Ryobi Battery and Charger: amzn.to/3AKa4WM
Ratcheting Wrenches: amzn.to/3OY15pk
Socket Set (with swivel extension): amzn.to/3Ix9SvX
Breaker bar set: amzn.to/3nT5LRD
Tool Kit - amzn.to/3acTWPN
Shop Rags - amzn.to/3e3OBv3
Shop Towels - amzn.to/3mRx0dG
Extensions - amzn.to/3cgcfEU
Loctite - amzn.to/3dyyMOe
Brake Cleaner - amzn.to/3uyr8vT
Video Gear:
DJI Osmo Mobile 3 - amzn.to/32mHI39
GoPro Hero 10 Black (basic kit) - amzn.to/3nVqSCy
GoPro Hero 10 Black (extra batteries) - amzn.to/3NVOmCp
GoPro Hero 10 Black (batteries and accessories) - amzn.to/3Rs49vs
62" Camera Tripod - amzn.to/2JNEnne
GoPro Single Suction Mount - amzn.to/3kbbzl3
GoPro Three-Arm Suction Mount - amzn.to/3k6ke8h
As an Amazon Associate, we earn from qualifying purchases.
We get commissions for purchases made through links in this post.
Disclaimer:
Trick Shift Garage hosts are DIY (Do IT Yourself), not mechanics. Due to factors beyond the control of Trick Shift Garage, we cannot guarantee against improper use or unauthorized modifications of this information. Trick Shift Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Trick Shift Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Trick Shift Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Trick Shift Garage.

Пікірлер: 47

@martyneilan8947 12 күн бұрын

I am glad Honda made it accessible on the 2.4 engine. Some cars make it so hard to get to.

@TrickShiftGarage 12 күн бұрын

Ain't that the truth! So easy to replace on these cars.

@joec42 9 күн бұрын

Nice video very explained. I hope this solved you oil consumption.

@mikem4696 5 ай бұрын

Perfect video. Just please recommend that it’s torqued correctly. That’s important. Thanks for the clear concise video.

@fatthumbs2020 Ай бұрын

But he did

@peepskate8279 11 ай бұрын

EXACT VID I NEEDED THANKS MAN 🙏🏼

@TrickShiftGarage 11 ай бұрын

Anytime! Thanks for watching! 🤟

@jovannypatricio4165 Ай бұрын

Perfect video thank you, even if I don’t speak English I understand very well thanks

@TrickShiftGarage Ай бұрын

Thank you! 🤟

@fatthumbs2020 Ай бұрын

Nice watch bro! I like that! Great video

@TrickShiftGarage Ай бұрын

Thanks brother! 🤟

@coolbema 6 ай бұрын

This is very common issue with almost cars. Neglected oil and filters services usually cause this problem. Years back I bought a used Nissan Tiida 1.8, driving back home I noticed car was struggling to run as someone holding a neck to breath. Few days later, I did major service myself all plugs filters etc and luckily replaced the PCV with genuine part, old PCV was almost chocked no rattling sound. After service when I drive the car it was total different car..more pick, smooth idle and drive. But the old PCV had already done the damage when few days later in morning struggle to start. Obd2 showed crankshaft sensor problem when I removed old crankshaft sensor it was completely covered with engine oil then I realized old pcv valve damaged the main Centre seal and pool of oil was in engine and transmission housing belly. Unfortunately oil was not dripping on ground so I couldn't noticed it though it was reducing engine oil. Long post but my experience replace PCV early 60k or 80k if oil drains are late and check main Centre seal.

@TrickShiftGarage 6 ай бұрын

Agreed! Keeping up with maintenance is extremely important!

@mcgvr1092 9 ай бұрын

Thanks for the video. Changed the PCV valve on ours with this video. The old valve still rattled a little as well. I saw in the comments that you said it did not fix the oil consumption and you were trying something else. Have you released that video yet? If so what is it's title? Thanks

@TrickShiftGarage 9 ай бұрын

Nope, haven't filmed it yet but I plan on doing it at some point this year! Basically, it consists of removing the spark plugs and putting a few drops of either Seafom or Marvel Mystery Oil on top of the piston. Apparently, that could solve the oil consumption issue these engines face, but I definitely want to test it to confirm.

@TrickShiftGarage 9 ай бұрын

Oh, and I'm going to let the Seafoam or MMO sit on the piston for a couple of days before putting the spark plugs back in and starting the engine. Even if it doesn't solve the oil consumption issue, it will clean up the carbon deposits pretty well.

@kbj12106 6 ай бұрын

I put 5 oz of sea foam in the crankcase per sea foam directions. As I researched these engines had too small of oil holes in the pistons from new. So a better way I thought was to go into the oil with the sea foam. Jury still out but switched to Shell T-5 blended 15-40 diesel oil and that alone helped. Still have massive blowby.

@mk-oe8yx 4 ай бұрын

@@TrickShiftGarageis it fixed??

@danw4520 7 ай бұрын

What size clamp is that? That goes over the hose onto the pcv valve

@TrickShiftGarage 7 ай бұрын

I'm not 100% sure, but here is a kit that should have that size! 20 Pcs Hose Clamps Stainless Steel, 1/4-2 in (6-51mm) Adjustable Worm Gear Pipe Hose Clamps, Heavy Duty Fuel Line Hose Clamps for Plumbing, Automotive, Dishwasher, Washing Machine, Mechanical a.co/d/cknubAY

@marcoa.sanchez9297 Жыл бұрын

Great video, about to change mine here soon. Hope to see a difference in oil consumption. Any noticeable difference off the bat?

@TrickShiftGarage Жыл бұрын

No, not yet. I should have a better understanding of it in another 2-3 weeks. I'll provide an updated video once that happens.

@marcoa.sanchez9297 Жыл бұрын

@@TrickShiftGarage Sounds good man. Earned a sub 😎

@TrickShiftGarage Жыл бұрын

Awesome thank you very much Marco, we really appreciate the support! We have some more Accord videos dropping soon, including headlight restoration. Gonna be fun!

@childlikewarrior 28 күн бұрын

What about the washer on the old one? Keep it or no?

@TrickShiftGarage 28 күн бұрын

I believe the new one came with one. So I would toss it.

@mrfenderguy1 Жыл бұрын

Haha if you like torque specs”! Haha good one bro

@TrickShiftGarage Жыл бұрын

🤣

@IDGAF56852 6 ай бұрын

It’s an aluminium head and using the correct torque specifications is good practice,this goes for spark plugs or anything that is screwed into the aluminium head,but you wouldn’t even think of doing this would you because your more than likely just a hoon rev head that doesn’t gaf about important things like torque specifications with aluminium heads until you have to replace things that you’ve over torqued then they either snap off in the head or the threads get damaged ! Common sense and logic which your generation doesn’t have.

@TrickShiftGarage 6 ай бұрын

Are you OK?

@IDGAF56852 6 ай бұрын

@@TrickShiftGarage are you ok ?

@IDGAF56852 6 ай бұрын

@@TrickShiftGarage my comment wasn’t directed at you it was directed at @mrfenderguy1.

@joeyharrison6690 8 ай бұрын

I heard the valve cover gasket can leak.

@TrickShiftGarage 8 ай бұрын

Yea I have heard that too. But I don't believe that's the issue with this car. There was no oil around the spark plugs and the car doesn't have any smoke coming out of the exhaust. Sometimes (as is the case with this Accord) oil consumption issues can be so difficult to find. But I'm still going to try! Thanks for watching! 🤟

@ChmodX 4 ай бұрын

I noticed a valve cover gasket leak a few weeks ago. Today my oil light came on and needed almost 2 quarts to top it back off. Tomorrow I'm replacing the pcv valve to try and fix. I hope it's not the pistons and rings. That'll be new car time.

@lisaeastes3104 9 ай бұрын

❤️

@TrickShiftGarage 9 ай бұрын

Thanks for watching! 🤟

@lisaeastes3104 9 ай бұрын

@@TrickShiftGarage you're welcome

@jwuzheer1559 Жыл бұрын

That grrrrfff sound you made when removing the valve was relatable as fuck. I chuckled. Did this fix issue? I have the same problem

@TrickShiftGarage Жыл бұрын

😆 Unfortunately, it did not fix it. I am going to try something else soon. Working on getting everything together I need for that video.

@ps3Rambo21 11 ай бұрын

@@TrickShiftGarage mine chews oil too.

@TrickShiftGarage 11 ай бұрын

I'm still trying to put that video together. Hopefully by the end of the month I will have it uploaded. Stay tuned!

@megastizz 7 ай бұрын

Honda states a quart every 1000 miles is normal

@surajdawadi7065 5 ай бұрын

Great video! Is it same for 3.5L V6 as well?

@TrickShiftGarage 5 ай бұрын

Hello, no it's kind of different on the 3.5 V6. I believe the PCV Valve is located right behind the oil fil cap on the V6 and is more of a black plastic tube, as opposed to the metal one on the 4 cylinder. But the procedure is the same. Just remove the old one and install the new one.