2008 - 2012 Jeep Liberty Radio Install

Рет қаралды 50,586

Күн бұрын

Parts used listed in the description below!
Watch a full tutorial as a 2012 Jeep Liberty will have a new double din Boss bluetooth radio installed. This radio provides additional features including bluetooth, USB, backup camera compatibility, Apple Carplay / Android Auto and an enhanced sound quality. We will be retaining the factory steering wheel volume controls.
Note: If you have the factory subwoofer, the installation parts will be identical as the harnesses used retains the factory amp. For further explanation on how to know how to wire your harness using either the Crux SWRCR-59 or SOOCR-26, see this video here:
• Crux Chrysler Jeep Dod...
This video applies to Jeep Liberty models for years 2008, 2009, 2010, 2011 and 2012. This video also includes complete radio wiring and assembly, installation, and testing.
Click here to see the backup camera install:
• 2008 - 2012 Jeep Liber...
Click here to see the USB flush mount adapter install:
• Car USB Flush Mount In...
Click here for the front speaker install video:
• 2008 - 2012 Jeep Liber...
Click here for the rear speaker install video:
• 2008 - 2012 Jeep Liber...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Parts used in this install (Amazon Associate Paid Links):
*Boss Audio BVCP9700A Carplay Radio: amzn.to/3JODLXD
*Metra 95-6511 Double Din Dash Kit: amzn.to/3dngoab
--Use the Metra 99-6511 for single din chassis: amzn.to/3k69ytC
*Metra 40-EU10 Antenna Adapter: amzn.to/2UKAuop
*Crux SWRCR-59 SWC and Harness Adapter: amzn.to/3hoiKqS
--If you don't have the steering wheel controls use the Crux SOOCR-26:
amzn.to/3h6bRvo
*(Optional) AUX/USB adapter: amzn.to/2SYXEGS
*(Optional) USB/USB adapter: amzn.to/2URnTA0
*(Optional) Single USB adapter: amzn.to/3gGHkms
*(Optional) HDMI/USB adapter: amzn.to/2WAX5oJ
*If retaining XM Radio, use the antenna adapter: amzn.to/3z1Xqy0
And the tuner kit: amzn.to/2WM1ULH
--Radio will need to be compatible with XM (or XM ready), such as this unit: amzn.to/3ALE9EH
Disclosure: As an Amazon Associate I earn from qualifying purchases

Пікірлер: 48

@ProvoBeastAudio Жыл бұрын

Parts used linked in the description of the video!

@axman2907 3 ай бұрын

This will be a great gift for my wife's jeep. Probably make it a mothers day gift

@klb1956 Жыл бұрын

SWC Dilemma: Thank you for the informative install video. I purchased the same set up based on your video. After installation following the instructions and your video, my SWC still did not work! Pulling my hair out knowing I followed the instructions to a "T", I called BOSS tech support. They too said it should work and recommended contacting CRUX. After explaining to them and within 1 minute, BINGO!, I have full SWC! Ok, so I didn't read the little sheet that came with the CRUX package that tells you to open the CRUX interface box and there is a very small DIP switch setting inside for 3v and 5v. I was instructed to switch it from the 5v to 3v and that was the answer. So, I hope this helps anyone else that missed the little sheet that came with the CRUX interface kit.

@Sakbadger 2 ай бұрын

Your videos are thoroughly thorough! Lol thank you, my man.

@southcreekoutfitters Жыл бұрын

Great install. Very happy with it.

@johnwilds5648 Жыл бұрын

I bought the setup in this video, and I was wondering if the radio supports the camera in AHD 720p mode, or if it only works in the default mode as the camera comes. I am asking, because I don't want to cut the purple wire and then have to resplice it.

@RayPearcetv 3 ай бұрын

Recently purchased everything in video. Realized my head unit has the bezel installed. For the life of me I couldn't figure out why the side parts would not sit flushed against it like yours did. Have to take it apart when I get off work.

@hectorbelen4734 8 ай бұрын

have a 2012 Jeep Liberty Jet with the Infinity system. Mine came with a 7-inch monitor from the factory. and apparently it is damaged because it only blinks I went to put a new one in but I realized that it takes a lot of parts and is very expensive. I saw your video and it is simple, can you help me with what I need to do it myself? My system has a factory riversa camera from the factory.

@israelrodriguez6551 4 ай бұрын

Is the same interface if i want to add the rear camera?, thank you for your help

@JuNo-121 7 ай бұрын

@ProvoBeastAudio if you connect the two usb extensions to the radio, how does it know which one is the iPhone you'd be connecting to CarPlay and can the other just be charging?

@jackmurphy9026 2 ай бұрын

I hooked all of the wires up to my new head unit according to the charts that came with the harness and my head unit but there’s a constant hissing now coming from the speakers. I checked all of my grounds so it’s not that. Any idea how to fix this?

@user-kp3fe6xe3p Жыл бұрын

SO I actually went through and used all the products you used in this video and went through the install in my Daughters 2011 Jeep Liberty Sport we bought for her first car. After the install I gave it the old test for full function before buttoning everything up, and the stereo will not turn on completely. I get the buttons on the left to blink on and then off and that is it. I have tested for power to the common and to the accessory for 12volts all is there. I tried a soft and hard reset of the head unit but that also did not work. just the same issue with the buttons to blink on and then off right away. I also did a bench test to see if the head unit would power on and it in fact powered on all the way. The only thing I do not have wired is the Parking brake wire. But it is my assumption that the Head unit should still power on fully without that, but just get a message restricting certain functions. Any help would be appreciated.

@Human-bf7kz 9 ай бұрын

5 Months later. What was the cause of the problem?

@dunlapmichaell Жыл бұрын

Did the factory radio have Sirius ?

@at7264 Жыл бұрын

Love the video, I’m working on my 2008 Jeep Liberty Limited 4x4, I don’t have any type of steering wheel controls so do I need the Crux adapter? Can I get by with just an Antenna adapter, wire harness kit, and dash kit?

@ProvoBeastAudio Жыл бұрын

You still need a smart harness. The non- steering wheel control version is also linked.

@erwinf2010 Жыл бұрын

The way you worked the harness looks awesome!! I have the 2012 liberty Jet model with the subwoofer in the back. Would you be able to prepare the harness as you performed in the video if I send you the materials? If so, how much would you charge for that job and extra materials? Thanks for the video! Erwin

@ProvoBeastAudio Жыл бұрын

Hey Erwin, sure. Send us a message on facebook and we can work out the details.

@TheFearlez1 Ай бұрын

How do I know if my jeep has a stock amplifier or not

@lynnk6478 3 ай бұрын

Where can I buy crux swrcr-59

@jamesw2591 Жыл бұрын

I'm working on 2012 Liberty without amp. The purple white that is labeled reverse gear attaches to reverse input or parking brake input wire of Boss harness?

@ProvoBeastAudio Жыл бұрын

The purple white wire goes to the reverse input wire of the new radio (if your radio is backup camera compatible). Do NOT hook it to the parking brake wire or else you can short out that circuit.

@dougminnis192 6 күн бұрын

Do these radios pick up AM?

@rustyflores1245 Жыл бұрын

Question I'm doing this same install and there is another connector that's smaller can't find what its for and the kit doesn't have a connector for it to go in?

@ProvoBeastAudio Жыл бұрын

Depends on the harness adapter and the trim of the vehicle. Some have the factory backup camera, others have data wires that pass through it which the harness / new radio doesn't require. If you are keeping all factory features, nothing to stress about.

@jefftelijeune7012 Жыл бұрын

I have 2012 Jeep Liberty which I believe is SXM-ready, do I need to purchase the kit or do I only need to purchase a XM-ready radio? Any tips or advice will help

@ProvoBeastAudio Жыл бұрын

Yes, the radio first off needs to be XM radio ready, and you will need the XM tuner here: amzn.to/3CfClE8

@yumajosh3710 Жыл бұрын

Mine has the factory subwoofer in the back but I can still use all the same items you used in your video correct ?

@ProvoBeastAudio Жыл бұрын

Yes, the harness we linked will work both with the factory amplified or amplified audio systems.

@isaacclementshaw2889 Жыл бұрын

Hi, so I hooked it up to my 2011 Jeep Liberty color for color and did exactly what you did since it doesn't have the upgraded audio system. Everything works except the steering wheel controls. I also have to have all the swiches off, unlike what it says and have one on, for it to work. Do you know what I did wrong?

@ProvoBeastAudio Жыл бұрын

Your switch programming isn't right. Depends on the radio. I can help you if you send me a message on our facebook page.

@klb1956 Жыл бұрын

Did you solve it? Open the interface box and set the internal dip switch from 5v to 3v

@FrostyD3viL Жыл бұрын

Could the same setup work on a 2007 dodge nitro RT I have the factory subwoofer included with the RT package. Need to upgrade for Bluetooth mostly but I want to keep my factory subwoofer

@isaacclementshaw2889 Жыл бұрын

Hi again, what does the parking brake wire hook up to?

@ProvoBeastAudio Жыл бұрын

This model radio can simply have the parking brake grounded anywhere. However Pioneer and alpine brands require a microbypass or to hook it up correctly.

@isaacclementshaw2889 Жыл бұрын

Hey, do I need the crux smart adapter if I have the controls on the back?

@ProvoBeastAudio Жыл бұрын

You still need a smart harness yes. The version without steering wheel volume controls is the Crux SOOCR-26 amzn.to/40koDuq

@isaacclementshaw2889 Жыл бұрын

@Provo Beast Audio Installation Thank you, I just ordered it.

@Grandpa2cents Жыл бұрын

The width of my stereo opening is 3.5 inches and the sterio y’all put is 3.8 inches did y’all have to cut frame?

@ProvoBeastAudio Жыл бұрын

Nope. And it’s by din size, not screen size. Kit we used is for double din radio (standard sized chassis). What year is your liberty?

@Grandpa2cents Жыл бұрын

@@ProvoBeastAudio 2012

@angelquiles7964 Жыл бұрын

I have the same problem the radio is bigger than the cover. The radio is a BVCP9700A And I a 2010 jeep liberty

@kimannjohnson Жыл бұрын

If you remove the casing on the stereo it fixes perfectly - there is small black casing/lip around the Boss stereo and it pops right off.

@togetherwehaveitall7025 Жыл бұрын

We tried that and it still won’t fit. Any other ideas?

@ashleythompson5926 Жыл бұрын

I have a 2011 Jeep liberty I purchased a screen radio from eBay. What is All the things I need?

@ProvoBeastAudio Жыл бұрын

The parts we linked in the description fits all double din radios.

@scottthompson4193 Жыл бұрын

Oh so easy and not complex at all 😂

@lowk518 6 ай бұрын

The link to the dash kit doesn’t fit the radio… we’re using the exact same radio too, but the dash kit you have linked, the holes do not match up at all Edit: okay never mind, I see how you did yours… now time to find bolts or screws that’ll fit those holes you have bolted/screwed in because the dash kit package doesn’t come with any but 4 screws lmao… wish they would’ve added more knowing what you had to do with yours