I can not imagine how could you make this video. To put camera always to perfect spot etc. Exceptional indeed.

Very helpful video, I have a 2012 mazda 3 with the same engine and the flywheel failed. I decided to replace it myself with help from my father even though I haven't done it before and saved myself hundreds in labour, cheers.

Awesome video, can really appreciate all the hard work that goes into a clutch change, not to mention all the camera work too 👍

thank you! teacher of car mechanics! 👍👍👍👍👍

Excellent! It helped me tremendously lot yesterday in replacing the clutch on a 2010 Focus 1.6 tdci. It is a complete video for the clutch. Though, replacing shaft oil seals makes sense, when you invest so much work. It is also better to completely remove the shafts for safety and more room to work.

I didn't notice to put the clutch oil back. Beside that, very informative video. It helped me a lot to make an idea about how should I do this job. Thank you. Greetings from Romania.

I in one day I mounted it twice, I put the clutch backwards ... haha. You are very good

You make it look easy and fast but it's not easy and fast at all !! 👍👍

Great vid you make it look so easy, good job 👍

AMAZING. ITS AN ART. MANY THANKS FOR YOUR VIDEOS. I have to try to change mine on a 407 1.6 HDI. Your videos give us motivation and know how. Jee that engine has so many oil leaks .....Many Thanks Kevin

Never new clutch change was so complicated. Hard work

tesekkur ederim.cok guzel video cekimin.bayildim

Great job mate, respect.

Eres muy bueno mecanico, me gusta mucho tus videos y aprendemos mucho de ti. Felicidades

great work man ,you are brave

Great video good to watch a top machine make a really difficult job like this look easy 10/10

Thank you so much for this video!

Great job Kevin ! Well done buddy 👏👍🙌

You da man well done

This one looks a right Bastard of a job to me Kevin ... Well done and great informative Video

Sometimes it's good to just have a camera videoing a job without commentary. Especially one with camera angles as good as this. Focus 1.6 TDCI clutches take me back to my apprentice days where the first clutch I ever did was on a Ford Fusion 1.4 TDCI that had done 230,000 miles exactly. Me being an apprentice managed to put the clutch in the wrong way round and nearly included a new master cylinder 😬. Since then I've never rushed a job 😂

Great video, thanks

Brilliant. Very informative. Thank you for your forethought. May I humbly suggest using a work light as a "fill light" to help with the contrast issues the camera has with the daylight/engine bay?

Needs an oil leak looked at never mind a clutch ,what a mechanic totally professional doing a job like that and filming it on his own good man well done

Fucking legend! Good job!

Good video

I'm working in my grandad's 2.0 TDCI. I am very glad its not as oily as your tho

Dankeschön

Does this has a concentric slave cylinder? If so how did you bleed it? Before or after you install the gearbox back to the engine?

Excellent videos love your work please keep posting videos and would be grateful if you change a clutch on a rear wheel drive car. Thanks

hello, what's better? for focus 2 1.6tdci? volant luk si clutch sachs? or sachs steering wheel and sachs clutch?

Nice 👍😀 I need to know next: how clean is throttle body of this kind of model and has it separate filter-element or particular fuel filter near by somewhere fuel tank at the bottom of the car?

Does it play belly flywheel?

How to bleed the clutch?

this is insane how much work is necessary only for preparation and later putting all together . BTW 19:00 there are easier ways! :D

So you need to drain the transmission oil or is it possible other way?

I have the 2009 Focus 2.0 tdci cc is this basically same procedure as this 1.6 or is it completely different? Just came across your videos excellent work.

Hi Kevin. I am so glad I found your videos! Is it the same procedure for the 2005 cmax 1.8 TDCi ? If so I hope to refer back to your video while doing the slave cylinder this weekend 🙏 Much appreciated Craig.

I like the abdominal curl to lift a gearbox into place.....

Good my friend

How much cost cluch parts and how much miles has the car? My car has 203000km on single clutch, soon i must replace it.

Does anybody know how many hours labour to change a clutch on this model?

Hi Kevin. Why Did you removed the right hand axle? It's really needed to perform this job?

👌💥

Can a mk 2.5 110 tdci dualmass be converted to singlemass ? Ive got mine on 135 thou and it needs its 4th dual mass my dad dont help

Amazing job, thank you for these informative videos. I'm looking to remove the gearbox on a 2011 volvo s40 with the D2 diesel engine. Do you know if i need to remove the sub frame or will there be enough room to slide it out? It's a 6 speed manual. Cheers.

Hi need to do mt partner's 1.6 tdci clutch.... do you have a video of taking the Acutal clutch of ?...this video just showed removing the gearbox or am i missing something?.Thanks

How much would this cost

Hi Kevin , getting addicted to watching your videos 👍, looks like a million miles on the clock with the state of the engine ?

Great video! Thanks! When you removed the air box at 12:34 , there was a rubber pipe still attached? How did you disconnect it and what is it?

Hi great video thanks. How long a job from start to finish ,wiĺl probably be doing one shortly with a noisy release bearing.

After all this process did u top up gearbox oil and clutch bleeding?

Least the bolts were easy to undo with the amount of oil that thing was spilling out the engine

Does any job like this faze you,? Nothing puts you off your stride. Great video

How much for this work?👍👍👍

Hello Kevin. I'm stuck on the bastard shaft removal, it doesn't want to release from the housing like yours did in the video. When I move it slightly forward and back it is hitting something ? :/

Do you cover West Midlands?

what jacking point do you use to lift the front axle?

hello sir 3 questions for you- 1 is there any problem following you r silent videos- 2 Is even 1 of these videos specific to an sp1-ib5- in america an ty for showing a lot.

How many speeds is this gearbox?

Hi mate I was gonna attempt this myself as I fix my car and most the stuff on my own but this is abit out my league how much do you charge for this mate if you don’t mind me asking

Propper grafter you! What is the weight of the gearbox? 💪 Sexy move putting it back in. :P

I have a c max 2.0 tdci 2011,is the clutch the same as this one ?thanks

silent man thanks

Oil leak everywhere 😂😂 How many mileage have the car ?

Lot of bolts, nothing referring clutch replacement.

The clutch on them ford focus are very bad like what is ford at they are getting to be very bad now a days

hello, what's better? for focus 2 1.6tdci? volant luk si clutch sachs? or sachs steering wheel and sachs clutch?