Hello and thank you for 9:08 of your time. Today, we replace the Trunk Switch Assembly with an OEM part number of 25380-1AA0A on our 2009 Nissan Murano 2nd generation. This is a pretty easy job and minimal tools are needed to accomplish it. We discovered that you may have to break the surrounding bezel on the older switch to get to the release tab, but if yours is already junk like ours was, then you may have no problem breaking it a little.
Please know that over time, products do get discontinued and therefore the links below will probably turn into dead links. If that happens to be the case and you would love to help me out, leave a comment and either I'll find you a new link to the same product, or link to an alternative product that I trust would benefit you.
Items used:
amzn.to/47cr4Dd (OEM Switch Assembly from actual Dealership)
bit.ly/3DlY0ey (OEM Switch Assembly; Alternate Source Actual Dealership Webstore)
bit.ly/3D933PB (HF; Trim And Molding Tool Set)
amzn.to/3pQlnKl (Trim And Molding Tool Set; alternate source)
Other tools that can be used:
bit.ly/44EhLtx (HF; Mini Pick and Hook Set)
amzn.to/3Y4KpC8 (Mini Pick and Hook Set) If no HF around you.
bit.ly/3rgcHgn (HF; small flat head screwdriver)
amzn.to/3Y0u6pA (small flat head screwdriver) if no HF around you.
Please Like, Subscribe, and Ding the Bell for new videos. It helps us a lot to be able to keep creating content like this. Also, any kickback from affiliate links, will be used to purchase other items that we can show on the channel and how we use it, and/or use it to give back to you all and do give-a-ways!
Also, if you feel like you'd be interested in tips, tricks, and DIYs of screen printing, sublimation, heat transfers and more, and learning the business side of those printing processes, head on over to my other channel, DiverseCity Print
/ @diversecityprint