2009 Jeep Grand Cherokee Clockspring Replacement

No video

2009 Jeep Grand Cherokee Clockspring Replacement

Рет қаралды 8,274

Jonathan Erber

Күн бұрын

Пікірлер: 31

@JoseRivera01 Жыл бұрын

thank you very much!!! I'm having that annoying airbag light On, it goes on and off sometimes so I decided to buy the Clickspring to do it myself. You made it look easy so thank you very much for the detailed instructions.

@swatscorner Ай бұрын

Very helpful!! Thanks! Doing this today.

@kpscal Жыл бұрын

Thank you very much for this video. This is super helpful and makes this repair seem easy as pie. Thanks so much!

@JonathanErber Жыл бұрын

Glad it helped!

@EdsPlace Жыл бұрын

Very helpful and concise, thank you. Swapped my 09 laredo's. Mine had metric hex/phillips screw on bottom cover, pia

@TheChosenFox Жыл бұрын

Thank you for the short sweet and simple video, million thanks!

@2manihobbies Жыл бұрын

Excellent quick video. To the point! Thanks

@JonathanErber Жыл бұрын

Thank you! I am glad it was helpful!

@robbrown5457 Жыл бұрын

Brill video, short yet concise. Clock spring changed, all gadgets working 👍

@JonathanErber Жыл бұрын

Heck yeah! Let's go!

@DeapJaz 5 ай бұрын

Thank you. Nice job.

@cuddlycutiez7087 6 ай бұрын

Great video. Thank you for posting. Made it so easy. Saved me a ton of $$$. Much appreciated.

@JonathanErber 6 ай бұрын

So glad it was helpful!

@christiancarias3420 Жыл бұрын

Great video buddy

@fernandorosario9035 11 ай бұрын

Great video and it def helped me switch mines out. But any idea if i have to reprogram the key fob because i cannot get it to open now 😢

@JonathanErber 11 ай бұрын

No, this should have no impact on the key fob operation.

@hectorrivera5390 9 ай бұрын

Good video mah man, thanks...

@user-bn8ps3hd2s Жыл бұрын

Nice job

@Samuel-is4wl 7 ай бұрын

What about the EAS BPS and traction light? Does replacing the clock spring help?

@JonathanErber 7 ай бұрын

It depends on what the code is, but most likely not. Even with the airbag light, it isn't always because of the clock spring. I would recommend having those lights diagnosed before throwing parts at it.

@cuddlycutiez7087 6 ай бұрын

That was my exact problem and yes it fixed me.

@willbutler3833 Жыл бұрын

Out of curiosity did you ever finish the tdi ranger? Going to be attempting a similar project soon

@JonathanErber Жыл бұрын

No, someone else here in town has that project now, but I am onto a TDI Dakota swap. I have a couple videos from that on my channel now, and a bunch of pictures and videos detailing the build on my Facebook.

@JonathanErber 7 ай бұрын

Dakota TDI is up and running! Video on my channel. Have you done that swap yet?

@ShyRage1 11 ай бұрын

Where did you purchase this clock spring?

@JonathanErber 11 ай бұрын

I don't recall, but I know they are readily available through the dealership, parts stores, and online from pretty much everywhere including eBay.

@ShyRage1 11 ай бұрын

@@JonathanErber ok great. yeah, I was asking because I found one similar to the one you have on ebay. NOnetheless, thank you for the reply.

@JonathanErber 11 ай бұрын

Yeah, that should work fine!

@ShyRage1 7 ай бұрын

Did you torque down the bolt? Noone mentions this

@JonathanErber 7 ай бұрын

@@ShyRage1 You talking about the steering wheel nut? Honestly, I know my little Snap On impact gun pretty well and gauge size of bolt and thread pitch for how hard to hit it, but that comes with experience. If you are questioning your torque and don't have a ton of experience, throw a little blue loctite on it and tighten it down good and tight. On this application that nut will be forgiving, especially with a little blue loctite.