He didn't show using brake cleaner to clean off the rotors. This is a crucial step. Also, I wouldn't use anti-seize on the back of the pads. I would use Moly lube that comes with the akebono pads, only need to put a dot right in the middle. The official Toyota maintenance videos on this on KZfaq.
@robbergstrom943 Жыл бұрын
Great video. That bolt that secures the brake line bracket is the exact same size as the single threaded hole on the rotor, so it can be used to push off the rotor in case it is stuck. Also, channel locks can damage the piston seals if not careful so I just push the pistons using the old pads with a clamp or pliers while they are still in place.
@Nnon11026hj3 жыл бұрын
This is probably the best brake replacement video on you tube. I searched and watched so many junk ones or mediocre version. You have details and anyone can follow directions. THUMBS UP!!
@PlatoonGarage3 жыл бұрын
Thank you so much, I try to make the videos as helpful as possible 👍
@jdesmo1 Жыл бұрын
Great vid. What are the torque specs you use for the lug nuts, caliper bolts, brake line retainer bolt? thanks
@mk2453 Жыл бұрын
the hard break line followed by the flexible line is done that way for off road purposes in mind.
@NytronX Жыл бұрын
Those rotors were basically brand new looking, lol. They didn't need replacing at all
@mymonte875 ай бұрын
Great video! How many miles do you have that you needed to change rotor? I have 60k and ready to do the first pad change but I don’t think I need to change to rotors.
@PlatoonGarage5 ай бұрын
My truck is just under 100k now. Measure the thickness of the rotors and if they are within spec and aren't vibrating, you are probably fine. I have always replaced rotors and pads during brake changes, it's just something I do
@gipstetz67203 жыл бұрын
Great vid. Very helpful. Love my GX too. Thanks for posting.
@PlatoonGarage3 жыл бұрын
glad it was helpful. I love this truck, I try to drive it every chance I can when my wife isn't looking :)
@mattinthebox243 жыл бұрын
Very helpful video. Thanks!
@PlatoonGarage3 жыл бұрын
you're welcome
@sergiyandriyenko79192 ай бұрын
I saw you left a link for pads, where did you buy rotors? Dealership?
@PlatoonGarage2 ай бұрын
Correct, ended up getting the rotors from the dealer. You could pick up good aftermarket rotors too, like brembo or something similar
@dhola60423 жыл бұрын
Quality content not annoying just gets to the point 👌
@PlatoonGarage3 жыл бұрын
Thanks 👍
@bencti4851 Жыл бұрын
How often we should replace the rotors ?
@PlatoonGarage Жыл бұрын
Replace them when they are below thickness. I replace rotors every time I replace pads, which is overkill for most people, but rotors are fairly cheap
@qasimhaleimi3 жыл бұрын
Why did you change the brake disc they are still new and can be used 3 times more just change the brake pad it will be enough and 1/3 the price
@PlatoonGarage3 жыл бұрын
I always change to new rotors when doing brakes, reduces chances for warping, and they aren't that expensive. Been doing brakes this way for 21 years. 👍
@jcranetx663 жыл бұрын
Recommendations on where you purchased the Toyota brake parts? Thanks.
@PlatoonGarage3 жыл бұрын
purchased them online from Bell Lexus (based out of Arizona)
@Bassmith13 жыл бұрын
I wonder why you replaced the rotors? Were they scored? I really couldn’t see anything wrong with them but maybe it didn’t show on camera. I’m gonna do my 4Runner but I don’t want to spend money on parts I don’t need.
@PlatoonGarage3 жыл бұрын
The rotors were probably fine, I always replace rotors when doing brakes for peace of mind, been doing it that way for 20 years and old habits are hard to break
@Bassmith13 жыл бұрын
@@PlatoonGarage thanks for the reply. I might just replace my rotors too. Thanks again.
@chungdr2 жыл бұрын
Why did you use a wrench and hammer to remove the bolts on the calliper versus a breaker bar?
@PlatoonGarage2 жыл бұрын
Just an old habit really, these vehicles have plenty of space to get whatever tool you want to use in there
@jorgelara90442 жыл бұрын
I noticed some rust in the brake pistons. Is that something to worry about?
@PlatoonGarage2 жыл бұрын
Rust in or on the Pistons? The piston needs to slide freely back and forth in the caliper and is protected by a dust boot. If the boot is torn you may be getting water in there which will eventually size the calip and you'll need to rebuild or replace it
@Paul-sk2pc2 жыл бұрын
Lexus is way overcharging for services. Dealer quote me nearly $800 for 30k services. The parts were less than $100 online and I was able to do it in 2 hours. $350 / hr labor is ridiculous
@PlatoonGarage2 жыл бұрын
Yep, it's robbery Most of these services are dead simple and can be done with basic hand tools, congratulations on saving yourself some cash
@jdesmo1 Жыл бұрын
Hi, what are the parts needed for the 30K service? just got my new 2023 GX in Nori Green.