2011 Cub Cadet Drive Belt Replacement
Рет қаралды 21,336
3 жыл бұрынThis is a 2011 (or 2012 I believe) Cub Cadet Z-Force S zero turn, 48 inch deck. I broke the deck belt, so I took the opportunity to replace the drive belt. I struggle with the drive belt so I wanted a record for next time.
I give myself a mild finger cut at 24:23, so if you don't like blood, skip forward to 24:30 to avoid that scene. I put text in the video to warn that it is coming up.
Background music is from www.bensound.com. Hope it is not too annoying. Camera work is a little off at times -- but I was filming as I was doing the work.
Took me about 5.5 hours. Might go quicker if I had a corded impact wrench. Maybe next time.
@georgesutherland884 22 күн бұрын
Great video. I hae the exact same machine. This was very helpful. 5.5 hours. Ouch!
@sadwingsraging3044 20 күн бұрын
Thanks. Helped me understand a lot of how they built it so now to manhandle this baby in place!
@bobralk836 5 күн бұрын
The pulley above the clutch that you had a problem with getting the belt around, that pulley just slides off the end of the crankshaft so you can put the belt on then slide the pulley back on the crank. Mine I can easily slide on and off just using my hands.
@baronvonteuchter1412 9 ай бұрын
This was really helpful thanks so much, handbook tells you how to do deck belt and it’s pretty simple - this one not so much!!
@terrybraun7631 7 ай бұрын
Glad it was helpful!
@bobk8118 Жыл бұрын
This was a tremendous help for my 2015 model. Thank you!!
@maximillicon1166 Жыл бұрын
thanks Terry..i have this exact same mower...done this job before..real, real, pain in the ass, just a shade tree mechanic on my end ...so pretty tough. All the video was extremely helpful. i guess overall the mower is still going after 12 years..
@terrybraun7631 11 ай бұрын
I was pricing a new one after this job... LOL.
@silentninja8156 2 жыл бұрын
Thanks for the video !!! It helped me out
@Rogersryan88 2 ай бұрын
Thank you
@terrybraun7631 3 жыл бұрын
Looks like my drive pulley is supposed to come off, but they will often rust on so bad they are difficult to get off. Yikes.
@terrybraun7631 3 жыл бұрын
Maybe I should try a pulley puller next time. www.amazon.com/Mofeez-inch-3-Jaw-Gear-Puller/dp/B07C9MRC7N/ref=sr_1_2?dchild=1&keywords=pulley+puller&qid=1622741714&sr=8-2
@davidbaumfeld359 2 жыл бұрын
To remove the old belt you could, oh I don’t know, just cut the belt.
@terrybraun7631 Жыл бұрын
Agreed. But its also nice to compare the old belt to the new belt as another check that you have the correct size.
@terrellpinner6428 2 жыл бұрын
you just need stronger impack . take the spring loose on idler pulley.
@terrybraun7631 11 ай бұрын
Agree -- springs used to scare me -- can be hard to get back on.
@sadwingsraging3044 20 күн бұрын
@terrybraun7631 Ryobi 1/2 impact. Got my magnetic clutch bolt off but it won't come off like yours did.
@feedyourhead7464 Жыл бұрын
What a nightmare. Why did I buy this thing.
THEMOWERMEDIC1
Рет қаралды 762 М.
Mechanical Mind
Рет қаралды 321 М.
KB's Small Engine Repair
Рет қаралды 411 М.
King Deadlego
Рет қаралды 33 М.