Thank you! I bought the black emblem as well, it looks waaaay better.
@joemed62224 жыл бұрын
You’re very welcome! It definitely looks better. Glad to hear the video helped.
@tigeabenton2174 Жыл бұрын
Good to know. I was ready to rip the front off as well as the rear. I guess I’ll just take the rear off for now. Thanks
@joemed6222 Жыл бұрын
You’re very welcome. I know there’s a video out there for the front one. You just have to remove the screws on top to pull the front grill slightly forward. It will be a little tight but it can be done lol. There’s 3 pressure clips that are kind of like a nut on a bolt. You can wiggle them off. It will take some finessing but you can do it! Thanks again for watching.
@theNigelTaylor Жыл бұрын
Thanks Joe
@joemed6222 Жыл бұрын
You’re very welcome Nigel!!! Hope it helped! Cheers
@matthewlevi15086 жыл бұрын
thank you, this was very helpful. Where did you purchase the new black emblem?
@joemed62226 жыл бұрын
Matthew Levi hey buddy, glad this was helpful. Sorry for responding late. A buddy of mine found them on eBay. We ordered it about a year ago. It took me awhile to install them. (A long while) lol. Unfortunately I don't have the contact sorry. All the best
@BreakingPintMedia3 жыл бұрын
Is the rear 9 inch just like the front one? Thanks for this video! BTW, is that Edge a Mineral Grey Metallic? I have a Mineral Grey and I'm considering the same color for the emblem.
@joemed62223 жыл бұрын
Thanks for watching. The rear is smaller then the front. I believe it’s 7 inches. The color is tuxedo black. Definitely do the same color as the body color, that would look great. Good luck buddy!
@BreakingPintMedia3 жыл бұрын
@@joemed6222 thanks! Shortly after I asked you the question I stopped being lazy and went out to measure mine... Yup, 7" for the tail gate badge. Have both on order. Thanks again for your video!
@BreakingPintMedia3 жыл бұрын
@@joemed6222 just a quick update that I got both front and rear emblems replaced. Look sooo much better! Definitely had to take a razor to the rear mounting surface due to all the rubbery adhesive residue, but other than that it was pretty straight forward. The front was a bit of PITA, even with the top grille mount screws and the hood latch off... But worth the effort.
@joemed62223 жыл бұрын
@@BreakingPintMedia that’s awesome. Yeah I had fun doing my front. After I was done I thought I should have made a video. So, I did one for the rear. Glad to hear you’re all done. It definitely makes it your own. Thanks for the update.
@mygt8a4re2 жыл бұрын
@@joemed6222 where did you guys get your emblems from? I see you said tuxedo black paint. That's what I'm looking for but everyone I find just has matte or gloss black. I appreciate the helpful vid 👍
@haniko12365 жыл бұрын
Well done . Please what the dimensions of rear emblem?
@wrap5132 ай бұрын
7"
@sametesikli30313 жыл бұрын
Hello, i have also a Ford Fiesta out 2011 but i cant find the black embleem. Where do you order this??
@joemed62223 жыл бұрын
Hey Samet, I bought my emblems on eBay about 3 years ago. I’ve been trying to find they guy I bought them from but no luck. Sorry. Only thing I can suggest is check eBay or join some Ford Fiesta forums. The guys in the forums are usually pretty cool and willing to help. Sorry I couldn’t help you. Best of luck 🤙🏻
@djbdavis983 жыл бұрын
I can barely hear your speaking audio. ? Background noise?
@gerryduggan68216 жыл бұрын
How do you remove the front badge bezel as i want to replace with another badge bezel on my 2013 ford focus mk3 hatch
@joemed62226 жыл бұрын
Gerry Duggan. Hey Gerry sorry for the super late reply. It’s been a crazy couple months. For my edge there were about 6 screws on the top front of the engine bay as soon as you lift your hood. It should be somewhat the same for your car. Either way, you need to remove those screws and pry the plastic forward to see the back of the emblem. Mine is a little bigger the yours and was held on with 2 nuts. It was pretty easy to pop off but it is kind of a tight space to work. Sorry if I wasn’t much help I’ve never done a car like yours. Good luck !!!
@dchallam5 жыл бұрын
It will either be nuts and bolts or bendy metal prongs. Possibly with sticky tape. Was on mk6 fiesta
@maximusgames5 жыл бұрын
Would be better if you heat it with a heat-gun before?
@AllAmericanGuy015 жыл бұрын
No? Why would you need a heat gun? They're held together by two pins.
@Chernelle5 жыл бұрын
@@AllAmericanGuy01 bcuz he said it was held together by adhesive, not pins.
@CyrixSG5 жыл бұрын
@@AllAmericanGuy01 Pins are a guide. The emblem itself is held in place by two-sided tape. The FRONT emblem may have a couple of bolts.