2012-2015 9th Gen Generation Honda Civic Rear Door Window Glass Replacement

Рет қаралды 18,640

7 жыл бұрын

Пікірлер: 26

@SuperBtheone 4 жыл бұрын

Thanks man your video helped me a bunch. The hardest part of it for me was getting the weather stripping back on correctly. I appreciate your video and thanks KZfaq for helping amateurs get projects done with guidance from others.

@VuBanh 4 жыл бұрын

I'm glad it was helpful!

@astra6712 Ай бұрын

Sweet. Did this on my 2009 Jazz replaced the left rear door window. Needed to remove the weather strip along the bottom. I just lifted that inward then up. Unscrewed the external black protector on either side of the outer window. The replacement glass lifted inside. Had to partially remove the weather seals and unscrewed a bolt in the door jamb to remove the guider to fit the window inside. Then just put it all back together and it works perfectly. Took me 1.5 hours and was the first time ever attempting it. 👍

@amousanon. Жыл бұрын

Excellent that you hardly talk or have music. Thank you for no music!!!!

@duckymans7604 4 жыл бұрын

Thank you for this. Made my life easier

@VuBanh 4 жыл бұрын

Great, glad it helped!

@MrKenlandry67 6 жыл бұрын

Excellent Video sir! Thanks, jerks broke the wife's rear window to steal my baby sisters purchase from some store... and Ha, glad to see I am not the only one that forgets to install a screw and has to go back!!!!! KUDOS!!!!!

@VuBanh 6 жыл бұрын

Ken Landry Thanks! Glad you found it helpful.

@darrankaminski1247 Жыл бұрын

looks like good work! just need to hear you better and show a couple of steps you were blocking, but it definitely helped me thanks!!!

@enriquegomez5841 Жыл бұрын

You just saved me so much money 😃

@clarencegallop221 2 жыл бұрын

Thank you for sharing this awesome video

@brad9798 5 жыл бұрын

Excellent video! Well done.

@VuBanh 5 жыл бұрын

Thanks Brad!

@faisalthe01 2 жыл бұрын

Thanks for the video. Really helpful

@VuBanh 2 жыл бұрын

You're very welcome. Glad it could be of use to someone!

@Karinrinkashi 3 жыл бұрын

Why do you need to take the screw out of the handle? I can't see how it stops us from removing the door panel?

@perfectsc0re637 6 жыл бұрын

can you please help me sir I am having a problem taking out that metal bar I'm trying to replace the window behind the one that rolls down

@VuBanh 6 жыл бұрын

ToastedThoughts There is a screw at the top of the bar hidden under the rubber door seal. And another screw in the sheet metal of the door. It's in the on screen comments of the video.

@201950201950 2 жыл бұрын

So the only way to replace the passenger glass is by removing that small quarter panel glass behind it correct?

@VuBanh 2 жыл бұрын

Yes, the quarter glass bracket has the right side guide slot for the passenger glass. If you don't remove it, there's no way to get the passenger glass out of the guides.

@The-Tinter-Mx 3 жыл бұрын

What was the reason of removing this Windows? Did you tinted?

@VuBanh 2 жыл бұрын

Yes, I had to replace the door, but the new door glass was not tinted, so I just replaced it with my old door glass.

@enriquegomez5841 Жыл бұрын

Should i leave the car on accessory mode while doing this ?

@VuBanh Жыл бұрын

You need to have ignition "on" but the engine doesn't need to be started. Once the window is down you can turn off the ignition until you want to roll up the window again.