Done about 3-4 of these bumpers now I recommend adding a 1/4” onto said measurements. 3/8” is a bit too short to hide behind the bumper

Great video, looking forward to getting our C4 bumpers installed

Love the bumper. Install on a 2021 with TSS is a bit different. You have to remove the system from the bumper when you reinstall it. You can first remove the cables to pull the bumper off. When you reinstall it the entire system needs to be removed and reinstalled. Not a big deal but it adds time to the install. Also the factory wiring for the fog lights is attached to the back of the bumper. This needs to be removed and moved up to the grill screws. Easy to do with some cable clamps and replacement screws. The suggested hack to install the two bottom bolts backwards worked great. If you are doing a light bar and don’t get it from C4 you will need the brackets they make. We had to fabricate brackets to raise the power steering fluid tube as well. This was an all day installation but well worth it. I would recommend assembling your winch a day prior to your install. That will save you some time and energy on your install day. The X3 SmittyBilt winch is a wired remote. For that I cut a door in the factory trim piece by the hood latch to provide and easy means to connect the remote. The engage/spool handle can be accessed from the front opening.

Outstanding. So detailed and easy to follow. Great camera work as well...very clear step by step instructions. Made it super easy to install my own bumper! Takes all of the guess work out!

Awesome product. I installed it in my wife’s 4Runner and she is very happy.

Is the install of the full bull bar the same? in regards to putting the lo pro bumper first then the plastic bumper/face?

At 13:40... you need to install the carriage bolt upwards with the flat bracket with slots... do not wait until you reinstall the bumper on (this is at 20:40 in the video.... there's a reason they skip this on the video. Its freaking unreachable....).... just the upwards carriage bolt at this step... the other one (not carriage bolt, can be tightened down after reinstall bumper ) 22:16

Excellent tutorial!

Thanks for the video. Only issue installing on my '16 TRDpro was the power steering control line. I installed a Warn VR 8S, and its a tight fit. I had to pull the steering fluid line towards the radiator with a zip tie and bend both of the brackets backwards. Not ideal. The C4 webstore has a comment about winch fitment, but I feel like it glosses over this height issue with the winch control box and the 4Runner power steering line. Appreciate any suggestions on where/how to relocate the winch control box.

Looks very sharp

Very minimalist bumper

What happened to the 2010-2013 version? How can I get one for my 2010 4Runner?

Yes, it was the aluminum 90 degree tabs they sent. I cut those and switched the part that bolts down. Fit perfectly in there. ;)

For the trd pro skid plate , can you attach it after you install the bumper ?

Do you have installation directions for the high clearance additions? Specifically, measurements for the bumper cut?

It there one like this for 2020 tacoma?

Is this the mid bar height?

I need this. How long did it take to install

anyone know what the diameter of top tupe is of the bull bar? i want to get mounting brackets for lp9s for them

A link to this product on your site would have been amazing.

Hi I bought a Toyota 4Runner off road 2021 and I want to put on it the body Armor 4x4 tr-19339 hiline stubby black powder coat front winch hd. And I wanted your expert opinion since you know much more than I do. Would this bumper block my front sensor?

Maybe I’m not seeing something, but couldn’t this bumper be installed without having to remove the factory bumper? Seems like I should be able to cut the center piece out without removing the factory bumper

Any idea how much a shop would charge for this installation?

What winch do you guys recommend for this vehicle? I’ve been eyeing the Lo pro bumper for a bit and I’m looking to take the plunge soon. Also, any plans on a roof rack for the 4Runner? Hope you guys are doing well in these weird times!

Does the Diode Dynamics SS30 fit properly in the C4 Low Pro? Please, having trouble installing the brackets to get it to fit right.

Are the recovery tabs on the bumper capable of supporting a tow bar connection for towing behind a motor home?

What cutting wheel do you recommend?

Yikes. I like it but I don't want to cut my bumper. What other options do I have? Thanks in advance

Did you paint the bumper black and powder coat if yourself?

Do the bumpers come powder coated

Wondering why the light bar I ordered with it has no instructions and is missing hardware to install it. Unfortunately I cannot seem to get a response from C4 nor the company that makes the bar ExtremeLedLightbar.

I know this is a lightweight bumper Is there a Noticeable drop in the front end with added weight of a winch w/o synthetic rope whats the average height lost with this setup?

What powder coat is this? Code? Is it texture or just satin no texture ?

Can you make an install video for this bumper install on a 4th Gen please.

My fog light was already disconnected after running up a tree stump.

Sweet!

😎

I really wish there was an option to not have the logo on the light bar. Does not look good to me to have the logo in the light bar, kills the clean look.

Honestly, watching this makes me not want to do this to my 4runner...

You guys ruined this bumper by moving your logo in the light bar. Sacrificed the looks of the bumper to promote your business. I hope you realize the market share you're giving to other fabricators. I personally know of three people that bought from other companies because of this. I hope you reconsider this because otherwise it's a good product. What a shame.