2014 Chevrolet Impala transmission electrical problems

No video

2014 Chevrolet Impala transmission electrical problems

Рет қаралды 20,913

Жыл бұрын

What to get you the Otofix scan tool with 2 YR'S FREE UPDATES ?? here's the link to my amazon page!!
amzn.to/3PjnC2k
Still dont want to pay $500!! try out the Otofix lite click on link down below for under $400
amzn.to/45HnxuQ
*Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use*
Automotive Test Light- amzn.to/3z1Pdxa
Flexible Backprobe- amzn.to/3Pyr3zO
Multimeter- amzn.to/3PbuT23
OBD Scan Tool- amzn.to/3zaNWnq
Wire Piercing Probe- amzn.to/3JpMtNY

Пікірлер: 125

@incith 2 ай бұрын

As an I.T. guy who has sworn off car repairs my whole life...this video really got me into it 💪 thanks man

@user-li5gg8uq5y 7 ай бұрын

I had the same problem with my 2015 Chevy Impala I just unplugged the transmission plug from the transmission and sprayed some WD40 on the plug and plugged it back and that fixed the problem. 3 years later and still no problems.

@Darren505 3 ай бұрын

I did the same with my 2015 Impala 5 years ago and it hasn't given me no more problems.

@incith 2 ай бұрын

Sorry but can you elaborate on this for me.. just regular wd-40? Did you dry it out or anything after?

@geet3212 2 ай бұрын

@@incithyes it really works a spent $4,000 chasing the problem over the years read this comment and tried it for myself and wouldn't you know $4.00 can of WD-40 did the trick And yes I use the paper towel and tap it and let it dry out first no more problems codes went away!

@exrae1992 2 ай бұрын

did this made things worse

@phillyL-ce9dw 29 күн бұрын

I'm sorry which plug did u un hook and spray having same issues

@mikechiodetti4482 11 ай бұрын

Good one Oz! New module makes for a smooth engagement. The module is doing its job adjusting the proper fluid pressure, whereas, the old module must have been in default mode, with the giveaway being the missing circle around the lettered position.

@OzMechanics 11 ай бұрын

This one was a fun one. Actually my first time changing out a tcm on a Impala. Programmed a lot but first time changing them out

@cuahutleko7698 7 ай бұрын

@@OzMechanicsWhere are you located?

@fredsalter1915 11 ай бұрын

I love these kinds of vids! Diagnose issue, replace bad part, then programming! Thanks, Oz!!!!

@OzMechanics 11 ай бұрын

I wasn’t sure of programming that’s why I haven’t really put one out. I’m going to see how the outcome is

@bornforparadise7517 11 ай бұрын

Excellent diagnostic , simple and great, thanks for sharing

@OzMechanics 11 ай бұрын

Thanks for the kind words.

@juansolis9409 8 ай бұрын

i was skeptical about you but man you are a PRO!

@roxanneabbott8424 11 ай бұрын

Awesome video Oz, I love the way you teach!!!

@OzMechanics 11 ай бұрын

Thanks Roxanne! Glad you enjoyed buoyed the video. What did you think of the programming segment? First video showing the whole process

@hilariomartinez8220 11 ай бұрын

Always good when people are learning

@advancedleveldiagnostics 11 ай бұрын

Great job Oz, Thanks for sharing!

@OzMechanics 11 ай бұрын

Thanks for watching

@crasher88 11 ай бұрын

Wish you would have show the actual replacement of the module inside the transmission

@OzMechanics 11 ай бұрын

Most of my videos are diagnostic videos. So I focus more on the process of showing how to properly diagnose the issue. Thanks for watching

@crasher88 11 ай бұрын

Oh I love the diagnostic videos, hoping the premier Houston based youtube mechanic will host a training event some time soon

@teranluis100 11 ай бұрын

@crasher88 Would he nice, not many training events around here, at least that I know of.

@luismarty1685 11 ай бұрын

Great video, Oz. Thank you.

@OzMechanics 11 ай бұрын

Thanks for stopping by Luis. Hope you have a wonderful weekend

@bartscave 11 ай бұрын

Thanks for sharing! Great video.

@OzMechanics 11 ай бұрын

Thank you for watching. Hope you have a wonderful weekend

@KDEngineRevive 11 ай бұрын

Another great video! Great diagnosis

@OzMechanics 11 ай бұрын

Thanks. Hope you have a wonderful weekend

@TheCultureCallout Ай бұрын

Great video. My impala doing the same right now lol said color make & model.

@sefofatai6618 11 ай бұрын

Just came across your channel. & subscribed. More programming videos on other makes/models please. Thank you

@OzMechanics 11 ай бұрын

Thanks for stopping by

@LAXMANGAWLANI 11 ай бұрын

Look at that...pure car daig no fuss no no over acting

@OzMechanics 11 ай бұрын

Thanks for watching

@ebrahimsadeghi5883 11 ай бұрын

Awesome 👏 Love your channel OZ

@matthewkey1 11 ай бұрын

Had the same code pop up, the TCM was actually fine, the connector however was making a bad connection. i wiggled it while the car was running and it smoothed out for a short time, then i was able to recreate the problem. I repinned the connector because i couldn't find a replacement. that was 45,000 miles ago.

@michaelstemage2989 8 ай бұрын

I am having the same problem is your vehicle still running fine?

@matthewkey1 8 ай бұрын

yes been doing fine since i repinned the connection. @@michaelstemage2989

@gsandoval4608 7 ай бұрын

Where qre you located i have 14 impala that sputter and traction light comes on then the doors unlock then lock while tour driving. I have to let go of the gas let it slow down then it resets itself all while your doing highway speed

@dwaters2k10 4 ай бұрын

I have the same exact problem it’s so annoying.

@yiannakosautomotivekeys2380 11 ай бұрын

Another great video OZ. Did you change the electrical part of the TCM, or the whole TCM? If you have changed just the TCM module (electrical part) that's a big job as this is inside the TCM. Thanks for sharing. Until the next one, take care.

@OzMechanics 11 ай бұрын

I changed the whole valve body that also has the tcm

@jimpetty45 11 ай бұрын

way to go oz great video ✌

@OzMechanics 11 ай бұрын

Thanks for watching jim

@casio5658 12 күн бұрын

Does the 2015 have the same part number for that tcm?

@shaunblakemore7150 11 ай бұрын

Great job 👍

@OzMechanics 11 ай бұрын

Thanks Shaun

@exrae1992 Ай бұрын

wat if i have no power on the connectors? im getting nothing on my tcm connector

@PaulCTownsend 11 ай бұрын

Great video Good job.

@OzMechanics 11 ай бұрын

Thanks for watching Paul

@sheerwillsurvival2064 11 ай бұрын

Would have loved to see the whole repair. Awesome though

@OzMechanics 11 ай бұрын

Thanks for watching

@allinmuza2961 11 ай бұрын

Brother man thanks you very much

@OzMechanics 11 ай бұрын

No, thank you for watching. Glad you enjoyed the video

@superkvideos4325 9 ай бұрын

Hello, Post video of you replacing the TCM in the 2014 Chevy Impala

@Darren505 3 ай бұрын

Good job but I guess I got lucky my 2015 had the same problem I just unplugged it and sprayed wd40 on the plug and it fixed it. 5 years later no problems.

@itsprestonc 8 ай бұрын

this happened to my 2015 2lt 8 months ago and fixed it with the new tcm. now the same thing is happening. what should i do?

@sub-zero1128 6 ай бұрын

could be bad wiring or connector to the tcm

@itsprestonc 6 ай бұрын

@@sub-zero1128 the pink wire, either negative or positive power i forgot which one, had a small split right where it pins in and it would cause it to unpin

@dwaters2k10 4 ай бұрын

Did you have to get a new transmission as well?

@mattmatt4916 4 ай бұрын

I have 2018 Impala 3.6 having shifting issues, and I'm probably going to replace solenoid or valve body. Did you have to drop the entire engine to get into the trans?

@noetoledo3589 7 ай бұрын

Do I need to do the transmission fast learn adapt for my transmission to work after programming a new TCM ?

@dwaters2k10 4 ай бұрын

Thank you for the video! I went to a mechanic for this issue he told me if I replaced the Tcm I would have to get a whole new transmission is that true?

@OzMechanics 4 ай бұрын

Not on this one ☝️

@johnplump3760 3 ай бұрын

i put in a used TCM in a 2007 Chevy Impalla. Tried to reprogram with info from internet info. Have R,3,2 & 1 gears. D is funcky. Guess I have to have a "PRO" program it. What are your thoughts?

@OzMechanics 3 ай бұрын

How did you program it

@raulalbor9691 5 ай бұрын

1st and foremost lol great video other than not using a voltmeter instead of a test light.

@williedouse1607 11 ай бұрын

Awesome video

@OzMechanics 11 ай бұрын

Thanks for stopping by willie. Glad you enjoyed the video

@DavidGutierrez-zi4dy 11 ай бұрын

pretty good video.

@rrmech11 11 ай бұрын

👍👍

@aymenmohamed1134 11 ай бұрын

Awesome

@OzMechanics 11 ай бұрын

Thanks for stopping by

@meditationrelaxsleepandmin8056 6 ай бұрын

I have the same exact problem with my car. I have a 2015. Are you located anywhere near New York Connecticut or New Jersey?

@danman9017 11 ай бұрын

nice video tks

@OzMechanics 11 ай бұрын

Thanks for watching Danman. What did you think of the programming part ? Seeing if i should continue doing them

@danman9017 11 ай бұрын

@@OzMechanics i do think programming info you share was good and about tool also tks

@neverstoplearning382 11 ай бұрын

Oz-esome video!!

@OzMechanics 11 ай бұрын

Thanks for stopping by

@OzMechanics 11 ай бұрын

What to get you the Otofix scan tool with 2 YR'S FREE UPDATES ?? here's the link to my amazon page!! amzn.to/3PjnC2k Still dont want to pay $500!! try out the Otofix lite click on link down below for under $400 amzn.to/45HnxuQ **Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use** Automotive Test Light- amzn.to/3z1Pdxa Flexible Backprobe- amzn.to/3Pyr3zO Multimeter- amzn.to/3PbuT23 OBD Scan Tool- amzn.to/3zaNWnq Wire Piercing Probe- amzn.to/3JpMtNY

@drewbush6535 11 ай бұрын

Nice

@raymondcunningham7083 11 ай бұрын

I've got a 2012 Impala 3.6L with the same issues and U0101 code. The so called mechanic told me i need a new transmission without even doing anything. Should I just tow it to a transmission shop?

@OzMechanics 11 ай бұрын

I would look for a good diagnostician in your area that would be able to properly find the issue

@raymondcunningham7083 11 ай бұрын

Ok. Thanks. I wished you were my mechanic 😊

@arielcastro34 7 ай бұрын

I have a 2016 3.6L u0101 what end up being the problem pls Help

@adamhoelscher400 10 ай бұрын

For the wake up signal from the 13 pin, what voltage is there supposed to be? On pin 12 I have 12.6 but on pin 13 I have 11.8v. All other voltages check out. I have the 2014 impala, same transmission.

@OzMechanics 10 ай бұрын

Check out this video talks a lil more about the wake up signal

@adamhoelscher400 10 ай бұрын

@@OzMechanics thanks for the reply! I watched it again but didn’t see any mention of the voltages needed. I have over 12v on pin 12 but only 11.8v on pin 13.

@mikesabin8568 11 ай бұрын

I would have pulled out the two fuses before i went down to the transmission module. Power on both sides if fuse but you dont know if the legs were there.

@OzMechanics 11 ай бұрын

Awesome

@richardostrowski6420 11 ай бұрын

He showed how he checked voltage and grounds at the transmission connector which would indicate that he was getting voltage through the fuses.

@mikesabin8568 11 ай бұрын

@@richardostrowski6420 I understand that…. Im just saying before you do that, quick check to see if the legs are on the fuses

@cuahutleko7698 8 ай бұрын

Where are you located?

@eddiejuarez7762 5 ай бұрын

How did you get the connector off! I can’t seem to get mine off!smh!

@incith 2 ай бұрын

You gotta pinch the sides of the red clip and then slide it out first. Then push the black part in front of the grey uh..grey thing that locks it into place.. the grey thing will slide down easily but it's really hard to get everything pushed right

@cuahutleko7698 8 ай бұрын

Where are you located? My 2013 Impala 3.6 L is doing the same thing.

@cuahutleko7698 4 ай бұрын

????? ?

@ebrahimsadeghi5883 11 ай бұрын

those programming procedures has to be done online or offline!!?

@OzMechanics 11 ай бұрын

Online. They have to pull the software off the server to program

@ebrahimsadeghi5883 11 ай бұрын

@@OzMechanics could you share the link to get to right software of GM downloading Thanks mate 🙏

@Rozay773 6 ай бұрын

Man I wish I knew which one was the TCM connector . You didn’t show it 😩

@OzMechanics 6 ай бұрын

It’s the one on the transmission pan

@Rozay773 6 ай бұрын

@@OzMechanics I’ll check it out, thanks!

@cuahutleko7698 4 ай бұрын

@@Rozay773How come you are ignoring my request? I am trying to see if you can fix my car.

@cuahutleko7698 4 ай бұрын

@@Rozay773I meant Ozmechanics.

@davidgriffin14 11 ай бұрын

You should be a teacher.

@OzMechanics 11 ай бұрын

Thanks David. I’m thinking about writing some material to teach later on

@joeandgod1 10 ай бұрын

I do Electrical Diagnostics but have not got into programming yet( which I find boring) Can you recommend a website to learn about programming.

@OzMechanics 10 ай бұрын

L1 auto training has amazing information.

@OzMechanics 10 ай бұрын

L1training.com

@joeandgod1 10 ай бұрын

@@OzMechanics Ok. I actually have heard of him. I'm gonna look into it. Thanks.

@cuahutleko7698 6 ай бұрын

??????

@nickayivor8432 11 ай бұрын

Enjoy your weekend with all your family around you, Oz Mechanics 👍 SHREWD Oz Mechanics From Nick Ayivor from London England UK 🇬🇧 ⏰️ 23::45pm

@OzMechanics 11 ай бұрын

Thanks for stopping by Nick. Hope all is well with you and your family

@richardc6038 11 ай бұрын

Oz there no sound

@OzMechanics 11 ай бұрын

Try going into it again. I’m getting sound on my end

@2094Ryan 11 ай бұрын

No sound bro

@OzMechanics 11 ай бұрын

There’s sound on my end

@juanrodriguez-ry6yt 11 ай бұрын

@@OzMechanics i can hear you even in Florida

@2094Ryan 11 ай бұрын

Sound on now.

@ramilteymurov3806 Ай бұрын

Ты причину не нашёл из за чего так произошло. Ну поменял но она снова испортится потому что ты причину не нашёл