2014 Ford Fiesta st clutch pedal sticking to floor : Charlies Garage WWTF002

Рет қаралды 19,265

5 жыл бұрын

Hello Charlies team,
today i will show you how to replace your master cylinder on your 2014 ford fiesta st. it is really basic install as you need just a couple of things.
if you find this difficult always dont hesitate to take your vehicle to professional help.
as always
share
like and
S U B S C R I B E !!!!!!!!

Пікірлер: 25

@phillipb.712 3 жыл бұрын

Great video! Thank you! Did you not have to use the bleed valve on the transmission to bleed the clutch line after putting the new clutch master cylinder in?

@user-hw9ko6cm8s 4 жыл бұрын

Have you tried Luk clutch? Need to replace my clutch component. Is it good as replacement for orig ford? Tia

@simonjlea 3 жыл бұрын

Hi, and thank you for a helpful and professional video Just one question, When you seemlessly swapped to under the bonnet removing the hydraulic pipes, how on earth did you get to them? I need to change my heater motor Although I realise I have a right hand drive, and it is different to yours?!?

@charliesgarage4528 3 жыл бұрын

Lol ohh uk version.. 🤔 the are close to the firewall like what separates the engine bay to the cockpit. Should be somewhere close the pedals

@ilhanfatih9749 4 жыл бұрын

Hi im illy from Australia, i enjoyed watching your video hope you are doing well, just wondering if you can help me im having problems with my wz Fiesta ST clutch pedal also. All of a sudden i lost preasure in the clutch pedal but i was still able to drive the car as when you step on the clutch right towards the end it will still grab the clutch ( hope you understand what i mean its like the cluth pedal has no pressure and when you press closer to the floor it engages / disengages the clutch and still change gears without crunching the gears. Just wanted to ask what were the symptoms you were having with a blad slave cylinder? Were you still able to clutch in with a soft clutch? Did you have oil missing from your master cylinder reservoir? Thank your for you help :)

@charliesgarage4528 4 жыл бұрын

Yes its similar to the same problem I had. For that problem is inside the transmission. You will need to replace the slave cylinder. And if you can spend some money replace your clutch and flywheel. Or at least your clutch. And you'll be perfect. THANKS FOR WATCHING from Australia awesome!

@jtsimaras 3 жыл бұрын

If by chance you have part number? Thank you

@MOTSAMAITWALA-ft8kv 5 ай бұрын

My is ford focus ecoboost 1.0, 2017 model same problem of clutch sticking on the floor

@MOTSAMAITWALA-ft8kv 5 ай бұрын

I did replace master slave cylinder clutch plate and pressure plate now i don't know what is a problem, it is still sticking on the floor

@plasticpinkduck 5 жыл бұрын

How do you decide if it's the master or slave affecting the clutch pedal? Or just start with the master since it's easier?

@charliesgarage4528 5 жыл бұрын

hey Kris i went for the master cylinder becasue its the easiest to check for first , the slave is in the transmission. in my case it was good for a minute then it went back to how it was. unfortunatly it turned to be the slave cylinder. :*(

@braxtonbrown6291 4 жыл бұрын

@@charliesgarage4528 I'm having the same issues. Please keep us updated on the fix. Did the slave cylinder work

@charliesgarage4528 4 жыл бұрын

@@braxtonbrown6291 it turned out it was the slave cylinder

@j_mars_cars 2 жыл бұрын

@@charliesgarage4528 ironically, I replaced my slave and It didn't change at all(also installed new clutch wrong so the slave had to be changed 2 times 😭. Now that's all good, $650 sorta wasted, I can install the actually failed part: master cylinder. Thanks for the video