No video
2014 Mercedes CLS550 All Keys Lost KEYLESS GO with Autel IM608
Рет қаралды 16,763
Күн бұрынIf this content helped you, you can buy me a coffee or make a donation
You can also become a VIP member on Patreon to access exclusive members-only content, technical information, videos, and procedures
VIP members also unlock access to the VIP Discord chat room where users can get support from myself and a knowledgeable community
www.buymeacoff...
/ joedlocksmith
JoeDLocksmith - Automotive Locksmith and Technical Support demonstrating Automotive Key Programming Procedures
These videos are only intended for educational purpose and should not be used for any illegal activities.
UHS Hardware For Locksmith Keys and Supplies
Here's a $15 off coupon for your first order at UHS Hardware. To accept, use my referral link:
i.refs.cc/p6fU...
@jackgates6949 Жыл бұрын
Very familiar voice and expert presentation. Might this be Joe DF...? 🙂 GREAT vids on this channel!
@ericdoh2884 Жыл бұрын
What a teacher
@optimusabdallah Жыл бұрын
question about this machine, can you use keys that were lost (i worked in a dealership and we had a drawer full of keys that were lost from old vehichles) and reprogram those keys for vehicles? or are the fobs kind of locked to the vehicle they originally came with? and if they are locked, is there any way to 'reset' an existing key to program it to a new vehicle?
@JoeDLocksmith Жыл бұрын
No most keys are not re-usable. Some keys are supported for renew
@user-zc1pz8xw8x 2 ай бұрын
@@JoeDLocksmithwhich keys are reusable
@VFVT101 3 ай бұрын
I would have loved to see your setup for this process. You started after everything was connected
@VestaLock Күн бұрын
STEAK GANG
@MikeK-ve2cu Ай бұрын
Great video 👍 my question is is this VVDI key first needed to program with xhorse tool ? Thx
@LoveMakaveli1 8 ай бұрын
Hey joe. Great stuff as always brother. I got a newbie question. Do you always try on a ALK situation to do it ON VEHICLE? How you can spot when it will be needed to go ON BENCH? (The question is mostly for mercedes). Thanks bud great work also.
@alAqsaAutoKeyStore Жыл бұрын
Good job ❤
@joyski330 3 ай бұрын
Is there any special procedure to program a renewed oem keyless go key on the w221 with all keys lost ?Do i have to remove batteries? Thanks
@user-Alhassany 11 ай бұрын
2008 s550 all keys lost proximity same procedure?
@mike.m6362 4 ай бұрын
good video thanks , did you use VVDI MB tool to program key for this car ?
@danielzaytsev644 6 ай бұрын
any reason why you didn't use g box? did you know that it would be a quick password regardless?
@on_the_wilfo 2 ай бұрын
Joe, you didn't need a gbox for this procedure??? 😊
@rods715 4 ай бұрын
Hey guys, 2006 cls55 , original key has keyless go working. Can I get keyless go to work on a aftermarket backup key.??
@AsadGamer Жыл бұрын
Great video. I got 2 questions 1. You didn't need to choose anything related to smart key type when writing When i add a key and the ori key is smart it asks if it's smart and i have to say yes, and i do the process without battery on the vvdi smart key ? 2. Can these keys be renewed with Autel, as they are be keys but smart ?
@JoeDLocksmith Жыл бұрын
Yes the keys can be renewed. VVDI instructions say to use normal key type v51 for key writing
@AsadGamer Жыл бұрын
@@JoeDLocksmith thanks a lot for the info
@adoumabdelhakim5460 Жыл бұрын
Merci beaucoup mon formateur
@outofthisworld8037 Жыл бұрын
@@JoeDLocksmith hey bro. did you directly connect to the OBD? and where was it located at ?
@JoeDLocksmith Жыл бұрын
@@outofthisworld8037 directly to OBD, driver side kick panel
@apocolizm 3 ай бұрын
where do you connect the plugs?
@Nery_00 Жыл бұрын
Amazing
@midomido7370 Жыл бұрын
Good job my friend how to program smart key with car any way to program smart
@user-ku6cu8ic1t 3 ай бұрын
Hi is it possible to renew a smart key??
@fadiabdo9976 2 ай бұрын
Is there a way to get the key blade code?
@myvideos853 Жыл бұрын
Can im508 do it on vehicle at the same 608?
@JoeDLocksmith Жыл бұрын
yes
@benjaminlevi7792 Жыл бұрын
Great video, but I didn't understand what kind of resistance number should use for 315&433frequenc?
@JoeDLocksmith Жыл бұрын
The key comes ready at 433mhz. If you want 315mhz, remove the resistor labeled FRE
@benjaminlevi7792 Жыл бұрын
@@JoeDLocksmith ok thank you very much I'm very happy with your great information
@dcshoeman2k4 5 ай бұрын
How do you remove it? Just rip it off with some needle nose or do you need to desolder?@@JoeDLocksmith
@carolinajimenez3254 8 ай бұрын
SALUDOS PUEDE DECIRME COMO CONECTAR LOS CABLES DE 608 PARA PROGRAMAR.
@carolinajimenez3254 8 ай бұрын
SALUDOS, PORFAVOR PUEDE DECIRME COMO ES LA CONETCION PARA PROGRAMAR CON 608. THANKS
@on_the_wilfo 2 ай бұрын
You didnt need gbox for this
@nhojyelbom Жыл бұрын
where are you buying your keys?
@JoeDLocksmith Жыл бұрын
Uhs-hardware.com
@Nery_00 Жыл бұрын
You should do classes and charge for beginners like me im willing to pay
@JoeDLocksmith Жыл бұрын
Good idea
@anointedchristopher9933 2 ай бұрын
Good Job
@Truthcanbeconfusing 8 ай бұрын
Why no all keys lost fast? You went to just all keys lost.
@mjenks85 Жыл бұрын
Anyone know what im doing wrong that my keyless entry will not work with any of the new keys i made.
@nhojyelbom Жыл бұрын
remove resistor or short board on freq spot
@aliefnurfallah5504 6 ай бұрын
Where is the position of the resistor ?
@BaboucarrGaye-kp4bk Жыл бұрын
Thanks but help for benz 2018
@JoeDLocksmith Жыл бұрын
Dealer only
@segounlocks5029 11 ай бұрын
In your dreams
@CeeeRock1 7 ай бұрын
@@segounlocks5029is it possible or not
@segounlocks5029 7 ай бұрын
@CeeeRock1 if your asking this question you probably shouldn't attempt any akl on benz sorry
@CeeeRock1 7 ай бұрын
@@segounlocks5029so dumb
Autel IM 608 S II , spare key coding for a 2010 Mercedes GL450 Spare key, keyless start doesn't work
Mark Pasieka
Рет қаралды 909
schluesseldienst_muzler_de
Рет қаралды 15 М.
Auto Purlieu
Рет қаралды 10 М.