2015-2020 BMW F8X M3/M4 Baffled Oil Catch Can Installation Guide by Mishimoto

No video

2015-2020 BMW F8X M3/M4 Baffled Oil Catch Can Installation Guide by Mishimoto

Рет қаралды 12,678

Күн бұрын

Product Page: www.mishimoto....
Engineering: www.mishimoto....
Facebook: www.mishimoto.c....
Twitter: www.mishimoto.c....
Instagram: www.mishimoto.c....
• Direct fit for the 2015-2020 F8X BMW M3 and M4
• Single can mounts in line with the CCV system to separate oil from air using a 50-micron bronze filter
• Helps reduce carbon buildup on intake valves
• Patent pending billet 6061 aluminum can sealed with Viton™ O-rings
• Installs in under 30 minutes
• Robust CNC-machined anodized aluminum bracket mounts the can in a serviceable location
• Includes pre-molded hoses for simplified installation
• Defends Vanos system and essential engine components from oil blow-by
• CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can
• Catch can has a 3 oz. capacity for longer servicing intervals
• Internal air diverter increases air turbulence to improve oil separation
• Helps maintain proper octane levels to reduce potential detonation
• Filter and can are fully serviceable
• Mishimoto Lifetime Warranty

Пікірлер: 30

@immytweed4607 6 ай бұрын

Difficulty level 0to 5. For me 10 😂. Great upload just what I was looking for 👊🏼

@flexspec 4 жыл бұрын

Will be doing this install tomorrow. Also ordered the petcock drain kit.

@-i-g7726 10 ай бұрын

Riding on the 5 Series 2018?

@dragngt 5 ай бұрын

What size is the bolt on the bottom that we can add a drain and valve to?

@mishimoto 5 ай бұрын

3/8 NPT

@dragngt 5 ай бұрын

@@mishimoto Thanks, ordered your kit for simplicity.

@Juspunjabi11 3 жыл бұрын

How do you get the fittings off the stock hose? I heated and heated it up, pulled as hard as I could even had my friends try and nothing would pop off lol. How do I go about this?

@mishimoto 3 жыл бұрын

We simply used the methods on the video to get this off. You could try carefully cutting the top to loosen it all up and be able to get the ends off.

@jaycdynasty 3 ай бұрын

Does it fit with the Eventuri V2 intake? Heard that it doesn’t fit. I wanna get this OCC but im currently running the V2

@mishimoto 3 ай бұрын

We have not tested with competitors products. Sorry!

@sultanf80 2 жыл бұрын

after i installed it , i faced a sound in pcv what is problem do you have expect before i change the cover valve or what i should i check in oil catch . thanks

@mishimoto 2 жыл бұрын

Please contact us at support@mishimoto.com and the team will be happy to look into this.

@ever6 4 жыл бұрын

Do you know of any Car Compact Baffled Oil Catch Can that will work for a 2016 BMW 428i

@mishimoto 4 жыл бұрын

Please see the link below for the kit we make for your vehicle. www.mishimoto.com/bmw-n20-n26-baffled-catch-can-2012.html

@bumplin9220 4 жыл бұрын

will make one that fits the F90 m5?

@mishimoto 4 жыл бұрын

Feel free to contact us at support@mishimoto.com with any product suggestions!

@rbar2841 3 жыл бұрын

Will this fit with my eventuri intakes?

@mishimoto 3 жыл бұрын

Unfortunately, we have not tested our products with those of our competitors. Sorry!

@aimeekovalev408 11 ай бұрын

Yes

@ahkeen 2 жыл бұрын

Installing is fine but how do you remove it to empty the oil? Reverse the steps? I see other companies have a way to extract the contents via a tube from the bottom or top.

@mishimoto 2 жыл бұрын

The bottom of the can twists off for cleaning

@asong26 Жыл бұрын

@@mishimoto Yeah, but how do you get your hands in there to twist the can without removing everything to get to the car and potentially dismounting the can in order to twist it off? Not a very well thought out for a usability perspective. I hope you guys can re-visit this particular SKU and provide an alternative mounting point for easier servicing.

@dragngt 5 ай бұрын

@@asong26When you open the air box for filter changes, you should have plenty of space.

@liuxinshang6719 4 жыл бұрын

Hi, Do you know if this OCC will fit with Ingen Evolution Intake? Trying to get both but don't know 100% that they will fit together.

@mishimoto 4 жыл бұрын

Unfortunately we did not confirm fitment with the Injen intake to be able to confirm fitment.

@timsmith8242 4 жыл бұрын

How easy is this to empty once its full? Looks like a pain to get to.

@mishimoto 4 жыл бұрын

Due to the space available in the engine bay there were not many spots available but we did place this is one of the more accessible locations. However installing a drain kit would make everything much easier.

@timsmith8242 4 жыл бұрын

@@mishimoto Do you guys sell the drain kit?

@fabulousprofound 4 жыл бұрын

Mishimoto Automotive more information on the drain kit please.

@behindthen0thing 2 жыл бұрын

@@mishimoto drain