2015 - 2020 Ford F150 Front Door Speaker / Tweeter Install

Рет қаралды 80,155

Күн бұрын

Parts linked in the description below!
Watch a full tutorial as a 2016 Ford F150 will have a new pair of Alpine component speakers installed in the front doors as well as the tweeter in the dash. We will be using the Alpine Type S-S65C 6.5" Component speaker set which is rated for 80w RMS each side of power output for better sound quality.
Note: This vehicle wasn't equipped with the Sony amplified system from the factory so we do not need to retrain a factory amplifier.
This video applies to Ford F-150 models for years 2015, 2016, 2017, 2018, 2019, and 2020. This kit also can work for F-250, F-350, F-450, and F-550 models for years 2017, 2018, and 2019. This video also includes door panel removal, speaker wiring, and installation.
Click here to see the rear speaker install on this F150:
• 2015 - 2020 Ford F150 ...
Click here for the amp and sub install on this F150:
• 2015 - 2020 Ford F150 ...
Click here to see the unboxing and demo of these speakers:
• Alpine 6.5" Type S Spe...
Click here to see the radio install on this F150:
• 2015 - 2020 Ford F150 ...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Speaker Installation Parts Used (Amazon Associate Paid Links):
*Alpine Type S 6.5" Component Speakers S-S65C: amzn.to/3vVgA73
*Metra 82-5607 Speaker Bracket Adapters: amzn.to/3kawo3M
--If you want to do a 6x9" Component install, here are the parts needed:
--Alpine Type S 6x9" Component Speakers S-S69C: amzn.to/3kPlosO
--Metra 82-5606 6x9" Speaker Bracket Adapter: amzn.to/3GDookB
*Metra 72-5602 Speaker Wiring Harnesses: amzn.to/3ebRFWR
*ABS Plastic Sheet (for tweeter mounts): amzn.to/3xJATWT
Disclosure: As an Amazon Associate I earn from qualifying purchases

Пікірлер: 80

@ProvoBeastAudio 3 жыл бұрын

Parts linked in the description!

@seadog19591 Жыл бұрын

All your videos are very well made, You guy's do a nice job.. Thanks for information on polarity,

@ematito1115 9 ай бұрын

Very informative video. I just installed mine in less than 2 hours, thanks to the video

@jeremiemummert989 2 жыл бұрын

Thanks alot. You do good work, and your videos helped me alot with my build.

@jesusm9385 Жыл бұрын

Beautiful video truly magnificent quick easy and to the point.

@ProvoBeastAudio Жыл бұрын

Subscribe!

@joshuakittleson3268 2 жыл бұрын

Great videos, thanks! I have a 2015 Ford F150 XLT, 8" Screen, no Sony or Amp. I am going to replace/upgrade all speakers and install the (2) 10" Alpine Sub box and Amp thanks to your videos! I have one question, why did you (and others for reference) decide to put in 6.5" speakers in the front doors instead of the stock 6x9" size speakers? 6.5" vs. 6x9". I hope to hear back, thanks!

@kingrdt 9 ай бұрын

Thx man... good video

@phattacorider 2 жыл бұрын

Great video! I just put a pair of coaxial 6.5" type S alpines in the rear, lack of treble obviously but I didn't want to drill anywhere for the tweeter. I do have a question, though. Did you notice a discernable difference in bass coming from the 6.5" versus the stock 6x9? I used to have the older type s components but only heard a difference with aftermarket head units that had multi-band eq's.

@iHernandez620 2 жыл бұрын

This method should be the same for the 2013 f150 right ? I have factory tweeters on the pillars . The only difference I see is the door speaker connector. The new I can see 3 pins, mine is only 2

@lukewilson7233 2 жыл бұрын

These are a decent upgrade from stock without an amp?

@jdmsaywhat Жыл бұрын

sounds really good. did you replace rear door speakers as well for the sound clip at the end or was that with rear stock speaker's?

@ProvoBeastAudio Жыл бұрын

Yes, all videos on this truck are linked in the description of this video.

@davidmunoz7222 2 жыл бұрын

How much depth space does that door have?

@Oneshott-id7jt 28 күн бұрын

Im looking for ideas on where and how to install a stryker 955 10 meter radio in my 2017 f150 xlt it measures 11x8x2. Would appreciate any ideas you might have.

@philipshaffer401 5 ай бұрын

Are those the in line crossovers on factory wires for the tweeters. Also what is the ohm load on tweeters ? My 21 f150 the tweeters factory 8 ohm and most tweeters im seeing on markets are around 6-4ohm is it ok to run like that ?

@revwithryan4460 Жыл бұрын

What size are the screws? You are using for the bracket to the speaker

@franciscoguzman881 9 ай бұрын

Where did u hide the component cross over and did u hook this up to a 4 channel amp?

@samroberts3256 Жыл бұрын

Hi PBAI. Great video. I already have 90% of the pieces that you used, except I am going to use a component pair of Boston Acoustics 6.0 (with crossover and tweeters) that I had for years, but never installed in any vehicle that I have owned ... fingers crossed that they are still clean and not dried out over the years in the basement. My truck is a 2017 F150 Supercrew. Next summer, I am going to amp it up with a 4ch Rockford Fosgate to run the 4 doors and a Soundstream bridged to run a single 8" woofer that I am building right now. Looking at an AudioControl LOC , so as to be able to keep the stock head unit. I've never taken door panels apart, so I ask - what is the real amount of time that I should alot for door disassembly - speaker replacement - and door reassembly (per door) ? And then I usually add at least 15%, for my standard first attempt🙃 Thank-you.

@ProvoBeastAudio Жыл бұрын

1st door will take you the longest, but follow the video and shouldn't be too bad. Give yourself a Saturday afternoon and you should knock it out in a few hours.

@johnm3659 3 жыл бұрын

Really interested in seeing the sub setup. Is the video out for the subwoofer install?

@ProvoBeastAudio 2 жыл бұрын

Linked in the description.

@joelane4670 Жыл бұрын

Great video bud. Question..I bought some of that soundproofing material. Should I put that behind the speaker bracket or mounts or will that make it stick out too far? Really appreciate your work brother thank you. I bought sound skins material.

@ProvoBeastAudio Жыл бұрын

you should be fine. But always good practice to check clearance carefully when you reattach the door. Shine a light through the speaker grill to make sure all clears.

@warrenschultz2735 Жыл бұрын

Just an FYI..I just put tweeters into my 2022 F150 Tremor and so everyone knows, the brackets holding the factory ones in, are held by screws, so no grinding needed to remove. Kinda nice and easier

@Barn94 Жыл бұрын

There wasnt grinding to remove these either

@kenwhite6362 10 ай бұрын

Do you know which wires are for the tweeters in passenger side kick panel

@warrenschultz2735 10 ай бұрын

When you pull off the pillar cover for the tweeters, you will see them.

@musselmanmedia5236 10 ай бұрын

do these have good bass??

@adonaya.1594 2 жыл бұрын

Great video Thanks for sharing! May I ask you something, the speaker in front by manufacture comes 6x9, you put 6.5 because you prefer or the 6x9 aftermarket not fit in the front? (windows issues,etc) I have F150 2016 Lariat Super crew and I want replace the factory speakers, I got the 6.5 to the rear but I read the front need 6.5 not 6x9 so that confusing me, I will appreciate your comments, thanks!!!!

@Silentroller93 2 жыл бұрын

Some people prefer the 6.5’s as they tend to sound better than 6x9’s IMO.

@anthonylerew 2 жыл бұрын

The 6x9 in the front are shallow compared to the back so 6x5 sound better

@RazielArturo Жыл бұрын

The original speaker size is 6x9 or 6x8??? and the rear ones what size are they? Thanx for the help.

@ThatWasCool2me2 Жыл бұрын

Just bought a 2022 Powerboost F150 and have already replaced the factory rear door base speakers with the 6.75 Kicker coaxial speakers but I want to put components for the fronts. Am I going to have to put the crossovers in the doors and run speaker wires from the doors to the tweeters on the pillars?

@chrisazo1 Жыл бұрын

This is the question!

@TheLawlessGang Жыл бұрын

damn i bought 3 way 6 x 9 before even watching this video oh well ill still install it well see how it sounds

@ProvoBeastAudio Жыл бұрын

Factory speaker is a 6x8, not a 6x9, and without the appropriate bracket, they probably wont fit. Bug good luck with your install.

@chadridsdale9970 Жыл бұрын

Metra makes a good bracket. I did the same with hertz cento pro 3 way 6x9. It has way too much treble now, it way overpowers the bass. I added soundmat and it didn't help much

@Gerard2001 10 ай бұрын

Sounds Good, its ok to install a 6x9 coaxial speakers rather than a 6x9 Component Speakers, how will affect the sound quality?

@ProvoBeastAudio 10 ай бұрын

Well you are leaving factory audio still in play, so really only replacing half of the issue. Sure, you can still do it, but it's your call.

@brockthomas2863 2 жыл бұрын

What is the Sony amp retrain? I have a stock Sony system and want to replace door speakers with these alpines.

@ProvoBeastAudio 2 жыл бұрын

Yep, this will work fine.

@evaristo1923 3 ай бұрын

I prefer replace the factory ones for a 6x9 alpine

@freddyvaldez519 2 жыл бұрын

Do need a crossover

@Silentroller93 2 жыл бұрын

Alpine has the crossover built inline.

@LinuxNation. Жыл бұрын

So a 6.5 for the rear of 6.9 for the front (factory specs) is too big/small in aftermarket dimensions? So I’ll have to use an adapter regardless??

@ProvoBeastAudio Жыл бұрын

You will need bracket adapters regardless for universal aftermarket speakers. You can get OE replacements (like from powerbass) that don’t require adapters, but they also can be more expensive.

@matthewrivas7832 2 жыл бұрын

Is there a better way to mount the tweeter?

@brianfontaine6625 15 күн бұрын

I've seen other people do it and I also did it. I mounted them in the plastic sails. Also if you're using a crossover in the door, it's way easier cuz it's closer.

@erikhefflefinger9998 Жыл бұрын

Can I just replace door speakers without tweeters?

@johncarrasco3604 Жыл бұрын

Yes

@aaron29851 Жыл бұрын

curious to see this run down to a crossover in the door

@ProvoBeastAudio Жыл бұрын

This is why we chose this type of component set as the crossovers were separate for the midrange and tweeter, so we didn't have to run new wiring for an external shared crossover.

@aaron29851 Жыл бұрын

@@ProvoBeastAudio I completely understand just curious as to how someone does it. I prefer to put my tweeter in the pillar instead of door but only running 4channel so need the 2 linked

@Wrensspeedshop Жыл бұрын

I was curious of this as well. I think my question falls along the same line as yours that I know usually whenever you see a component set you’ll also have the corresponding box that goes with it, which will allow you to increase or decrease treble etc. In the event that somebody had a system such as that do the wires from the a pillar come down into the door which would allow you to utilize the crossover box or would it require speaker wire being run up to the Twitter? Only reason I ask is because I noticed you used a bass blocker on that Twitter, so I was curious as to whether or not that wire fed down into the door along with the mid range. Thank you and great video.

@aaron29851 Жыл бұрын

@@Wrensspeedshop so depending on size of crossover I hid mine is the side there is a panel between the sail and dash you can stash the crossover I went active on my tweeters now but wasn’t a bad spot hope that helps

@aaron29851 Жыл бұрын

To offer a tad more clarity at the speaker input if your truck came with tweeter in the pillars tie in the crossover at input but make wire longer so you can run it down to hide crossover. Hope this helps,anymore questions feel free to ask. I’ll review this once I take a nap and make sure I’m making sense just got off night shift

@johnrambo4581 5 ай бұрын

Is their a reason to use 6.5 instead of a 6x9,or was it just personal preference?

@ProvoBeastAudio 5 ай бұрын

It was the preference of the customer. We have the 6x9 version in the description.

@leesmith-rv1rf Жыл бұрын

Do you sell the tweeter bracket you made?

@cptklutch26 Жыл бұрын

Lol just fabricate your own smh

@davidmcnew7015 Жыл бұрын

Was there a big difference from stock?

@ProvoBeastAudio Жыл бұрын

Big difference!

@ArielRodriguez-cr2lu 2 жыл бұрын

On the back of the alpine speakers what are the outer speaker terminals for? Not the middle ones but the outer terminals.

@iHernandez620 2 жыл бұрын

This should be the same as the 2013 f-150 right ? I have the factory tweeters . The only difference I see is the door speaker connector. The new on is 3 pins mine is 2 pins.

@MyPlayer28 Жыл бұрын

How inches is the tweeters

@ProvoBeastAudio Жыл бұрын

1" Tweeter, but including the housing, it's about 2" cutout size

@dannonrusch5496 Жыл бұрын

Why did you choose to go with 6.5 inch speakers over the stock size speakers?

@MJMDiY909 Жыл бұрын

Price, especially if the 6.5 can handle aftermarket radio wattage. Got myself since 6.5 alpines components that my aftermarket radio can push. I don't plan on adding an amp for door speakers. I already have a hungry hifonics amp I need to feed.

@CraigSRichardson Жыл бұрын

How did you get 75w from the head unit?

@ProvoBeastAudio Жыл бұрын

We added an amplifier (5 channel amp that also powers a new sub). That video series is linked in the description.

@chrisazo1 Жыл бұрын

@@ProvoBeastAudio did you install the alpine crossovers or just use the inline-passive crossovers shown in the a-pillar wiring?

@ProvoBeastAudio Жыл бұрын

@@chrisazo1 Always install the crossovers included with your new speakers. The in-line crossovers in the A pillar are the ones that are included with the Alpine speakers.

@user-lm5ix6tj8n 2 жыл бұрын

What happens if you don’t add the crossover?

@ProvoBeastAudio 2 жыл бұрын

Blow speakers as you will be sending frequencies that the speaker cant handle, speaker distorts, you will cause failure. Some speakers have built in crossovers already, so just depends on the brand and model.

@bigguy5360 Жыл бұрын

@@ProvoBeastAudio I used the Amazon link and bought the alpine speakers that you featured in the video. Could you please spec out the crossover that you used for these tweeters? Thanks!

@SamSam-ke9zy 2 жыл бұрын

Booo, you skipped the hard part running new speaker wires through the door hinge boots. You went the wasy route of just using puny factory wire harness.

@ProvoBeastAudio 2 жыл бұрын

It's because we didn't. No need to with the speakers we ran. The tweeters have their own crossover, so we used the factory tweeter leads to power our new tweeters.