2015-2023 Mustang GT/GT350/GT350R Mishimoto Performance Radiator 3-Row Aluminum Installation

Рет қаралды 46,198

Күн бұрын

Bill shows you how to install a Mishimoto 3-Row Aluminum Performance Radiator on your 2015-2023 GT, GT350 or GT350R Mustang.
Purchase Product Here:
www.cjponyparts.com/mishimoto...
When you keep a cool engine you're going to maintain the proper performance on your 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, or 2023 GT, GT350 or GT350R Mustang. Mishimoto offers a way to do just that. Enhancing your coolant capacity by one hundred and twenty nine percent over your stock radiator!
Accompanying the radiator is all the required mounting hardware, an already installed rubber trim seal and a magnetic drain plug. This three row aluminum performance radiator is a direct replacement for your factory original and easily install in around two to three hours.
Check out more Mustang Heating & Cooling parts from CJ's here:
www.cjponyparts.com/mustang-ai...
Subscribe to CJ Pony Parts on KZfaq here:
kzfaq.info_c...

Пікірлер: 27

@paulgunovich2766 4 жыл бұрын

Just done this install on my 2016 GT. Mine is an automatic. Be careful with the transmission cooler as the 2 factory 6mm bolts are a bit too long which came so close to piercing the radiator. Get 2 replacement bolts about 5mm shorter. Also I found it much easier to install the fans on the radiator then install the whole lot into the car. Just tie some hoses away for clearance then all good. The biggest pain in the arse was hooking up the air conditioning condenser to the radiator. After all that it's happy days. Hope this helps out. Good work Bill👍

@adrieleckart3509 4 жыл бұрын

Paul Gunovich how much coolant did it take to fill up?

@paulgunovich2766 4 жыл бұрын

@@adrieleckart3509 I used about 12 litres of coolant. Also if you have an automatic transmission, the cooler is secured by 2 6mm bolts on one side whilst on the opposite side it just sits within a bracket. This needs to be secured with some rubber or something similar to keep it from rubbing on the radiator cooling fins. All in all the install went well, cheers

@1234zcrom 7 жыл бұрын

thanks Bill. You have the best install vids.

@RobertKohut 8 жыл бұрын

Nice straight forward install!!

@drewdalesandro672 3 жыл бұрын

Thank you for this video! I have to replace the Fan Assembly. I was scared to do it and now I see how easy it is.

@islesrule123 8 жыл бұрын

Guess whos back! Back again! Bill is back! Tell a friend!

@TheJimmysrt4 6 ай бұрын

How much coolant Needs after radiator drain ?

@thanoz5.0reviews29 4 жыл бұрын

Perfect👌🏾

@ivanfedyshyn7211 Жыл бұрын

I have an issue with installing AC condenser on radiator brackets on the left. Pipes coming out from AC condenser are not allowing to aline radiator bracket.

@AYETHATSREESE Жыл бұрын

For whipple 2.9L can we use this instead of buying a heat exchanger?

@pdmustgtd1013 5 жыл бұрын

Vacuum fill cooling system best way don't have to run it to get air out. Besides exactly way factory does it too.

@cjponyparts 5 жыл бұрын

pdmustgt d agreed but most do it yourself owners won’t have the tool

@timandrews5730 5 жыл бұрын

Is this the same size as the factory non performance pack? Will it work with the hellion street sleeper turbo kit intercooler?

@djyanker2891 4 жыл бұрын

Tim Andrews I believe itsjust6 is running a twin turbo kit like hellion but a hellhorse kit with this radiator setup on a gt350

@louisvillarreal5090 Жыл бұрын

I need help with my 2015 Eco boost 2.3 mustang

@360milliondollars 7 жыл бұрын

If I were to change the radiator to a high horse power radiator before the engine mods will the radiator adjust to the heat once the engine mods are done or would I have flash the ECU again after the engine mod.

@louisvillarreal5090 Жыл бұрын

I ever here about eco boost 2.3 turbo mustang 2015 premium to make it 400-600 horsepower