No video

2015-2023 Mustang SR Performance Sport Lowering Springs Review & Install

  Рет қаралды 13,218

AmericanMuscle Mustang

AmericanMuscle Mustang

Күн бұрын

SR Performance's Sport Lowering Springs are an excellent way to improve the handling performance of your S550 Mustang. These Sport Springs will lower your Mustang's center of gravity, which will reduce squat during acceleration, body roll in the corners, and excessive nose-dive under hard braking. SR Performance Sport Springs are perfectly suited for daily driving, street, and occasional track applications.
Aggressive Muscle Car Stance. Not only does a set of SR Performance Sport Springs improve the handling performance of your Mustang, but they also improve its overall appearance by lowering the ride height approximately 1.2-inches front and 1.0-inches (Fastback) or 1.2-inches (Convertible) rear eliminating that huge tire to fender gap, for a more aggressive street stance.
Progressive and Linear Spring Rates. SR Performance designed their Sport Lowering Spring kit with progressive springs up front and linear springs in the rear. Progressive springs (also known as variable rate springs) provide a smooth ride with good handling characteristics when pushed hard. While linear springs have a constant spring rate allowing for optimum traction at low and high speeds.
Clears Stock and Aftermarket Wheels & Tires. These lowering springs were engineered to be compatible with your factory size wheels and tires, as well as AmericanMuscle's pre-configured wheel and tire combo kits (specific to your generation), to assure proper clearance with no rubbing issues.
Professional Installation Recommended. Seeing that a spring compressor is required for installation of these Coil Springs, AmericanMuscle recommends professional installation. With the proper tools, installation can be completed in about three hours. Please note that an alignment is highly recommended after installation.
Application. This set of four SR Performance Sport Lowering Springs are specifically designed for use on 2015-2023 coupe and convertible Mustangs equipped with independent rear suspension (IRS), including the V6, EcoBoost and GT models. Does not fit Shelby GT350 models.
Technical Note. These Springs are not compatible on vehicles equipped with the MagneRide Suspension System. muscle.am/41eA867
Intro - 0:04
Features - 0:23
Construction - 1:02
Price - 1:42
Install Difficulty - 1:54
Full Install - 2:32
Item 404915
----------------------------------------------------------------
Subscribe For New Mustang Videos Daily: muscle.am/SubscribeAMyt
Instagram: / americanmusclecom
Facebook: / americanmuscle
AmericanMuscle.com is your aftermarket Muscle Car Parts authority for all things Mustang, Mopar and Chevy! We offer Free 2 or 3-Day Shipping on more than 10,000 products and a staff of Muscle Car Enthusiasts. So give us a call and let us help build your Mustang, Mopar or Chevy today!
muscle.am/YTShopNow

Пікірлер: 28
@americanmuscle
@americanmuscle Жыл бұрын
Shop These SR Performance Sport Lowering Springs ! : muscle.am/41eA867
@TheRadLion
@TheRadLion 2 ай бұрын
Here are the torque specs for those interested in doing this correctly: 12:28 - 26ft/lbs 13:26 - 148ft/lbs 14:00 - 85ft/lbs 20:47 - 41ft/lbs 20:57 - 129ft/lbs 21:48 - 66ft/lbs
@jedediahorr9658
@jedediahorr9658 5 ай бұрын
What they fail to tell you in this video is that if you don’t have an extra set of hands when doing the rear springs is that you can use a scissor jack.
@aomaggots-
@aomaggots- 5 ай бұрын
@jedediahhorr how can I use a scissor jack for the rear springs? It seems like the issue is spreading the LCA, not compressing it.
@jdorr8613
@jdorr8613 5 ай бұрын
You are using the scissor jack to spread the LCA. You can also use metal zip ties on the spring while the spring is compressed so that when you let the tension off of the jack the spring stays compressed. Just be sure to use 3-4 zip ties to be safe.
@_dmv.coyote_
@_dmv.coyote_ 3 ай бұрын
is the 7/8 pass thru sockets and wrench and 10mm also required for taking the top hat off the strut?
@jedediahorr9658
@jedediahorr9658 3 ай бұрын
@@_dmv.coyote_yes it is but I believe on my 20 I used a 13/16 pass through socket.
@somuchDenero
@somuchDenero 3 ай бұрын
mine just showed up cant wait to put them on.
@antz19coyote73
@antz19coyote73 Жыл бұрын
Got em , love em
@americanmuscle
@americanmuscle Жыл бұрын
Thanks for watching! -Zach
@_dmv.coyote_
@_dmv.coyote_ 3 ай бұрын
is the 7/8 pass thru sockets and wrench and 10mm also required for taking the top hat off the strut?
@TheRadLion
@TheRadLion 2 ай бұрын
Why do you not give torque specs?
@robcasey6170
@robcasey6170 Жыл бұрын
Noah? Where the heck did Justin go?
@americanmuscle
@americanmuscle Жыл бұрын
Justin's still here! -Zach
@RobZtaco
@RobZtaco Жыл бұрын
Bring back Justin.
@woohunter1
@woohunter1 7 ай бұрын
So you don’t have to change bump stops on this brand?
@jedediahorr9658
@jedediahorr9658 5 ай бұрын
You don’t have to change bump stops on any brand. Just trim your factory bump stops. However; when you’re only lowering an inch you shouldn’t have to trim your factory bump stops but I always do just to be safe.
@woohunter1
@woohunter1 5 ай бұрын
@@jedediahorr9658 thanks! Good to know.
@shemarjames6211
@shemarjames6211 Жыл бұрын
I can’t fit 275 on the front of my 2020 mustang 🤦🏽‍♂️
@thereaper4481
@thereaper4481 6 ай бұрын
Dam
@Sik.Suki_750.
@Sik.Suki_750. 6 ай бұрын
Nothing was torqued 😟
@Ace1726
@Ace1726 Жыл бұрын
Yeah, wtf happened to Justin
@dickeyseamus
@dickeyseamus Жыл бұрын
People move on. Do the same.
@americanmuscle
@americanmuscle Жыл бұрын
He's still here, no worries! -Zach
@user-dh3xj3zp1q
@user-dh3xj3zp1q 2 ай бұрын
Why is the car leaning
@salvadorchavez91
@salvadorchavez91 Жыл бұрын
We know damn well you didn’t torque those to specs
@aparchie313
@aparchie313 9 ай бұрын
Lmfao
@woohunter1
@woohunter1 7 ай бұрын
He gave it three good “whrrrrrrr, whrrrrrrrr, whrrrrrrrr,s”
1979-2004 Mustang Coupe SR Performance Linear Lowering Springs Review & Install
30:09
A little girl was shy at her first ballet lesson #shorts
00:35
Fabiosa Animated
Рет қаралды 20 МЛН
👨‍🔧📐
00:43
Kan Andrey
Рет қаралды 7 МЛН
Blackstock Ford Supercharger Installation- 2024 Mustang GT
17:04
2015-2020 SR Performance Height & Damping Adjustable Coilovers Review & Install
43:51
Ford Performance Handling Packs Explained | Track-Tested At Ford's Proving Grounds
15:29
Lowering Springs | Which Is Best For Your Driving Style?
4:22
CJ Pony Parts
Рет қаралды 41 М.
Are The SR Performance Lowering Springs Worth It??
14:58
Mason Boxx
Рет қаралды 1,3 М.
2008-2019 Challenger Eibach Sportline Lowering Springs Review & Install
27:42
AmericanMuscle Dodge
Рет қаралды 71 М.
2005-2014 Mustang Coupe SR Performance Lowering Springs Review & Install
17:41
AmericanMuscle Mustang
Рет қаралды 16 М.
A little girl was shy at her first ballet lesson #shorts
00:35
Fabiosa Animated
Рет қаралды 20 МЛН