Crooked Firestone wanted to charge my son $ 510 to do this, but I could do it in about 45 minutes, thanks for the video. The part is $ 148 at orlies and I will save him the difference. Big savings. 😁

Thank you so much for this video! I was going to take the car to a shop until I found this video and decided to do it myself. Not only did everything go smoothly thanks to you, but I want to point out how good you are at making videos like this. You set up the most ideal camera angle (on a stand) and weren't constantly waving the camera around, zooming in and out everywhere and giving us confusing perspectives. You then did take the camera and properly gave us a closer look when necessary. You also spoke clearly and did a good job explaining everything that needed to be explained without rambling on about it. 10/10 perfect video. Thanks again!

Just fixed my window, took far longer than you did but I managed it!! Thanks for the video! If I could make a suggestion, a list of the sizes of tools/what tools you need (or your suggestions) in the description box would be amazing. I ended up figuring it out myself, but had a tough time 😅

Excellent video man! You're the only video so far that shows how to get the window seated...thank you!!

I'm not the most handy guy but I had to diy this because things are just too expensive these days. Thanks for the video it made it easy even for someone like me!

This was the best detailed and easiest video that I found. Though it was for a 2015 Chevy Cruze, mine was a 2013 Chevy Cruze LT, it was the same. THANK YOU!

Thank you so much for this video!! It saved me about $300 after paying for the part!! It took me about an hour to fix seeing that I’m not the most mechanically inclined lol

Thank you for the tutorial I was able to put the regulator in all by myself. Saved myself some money. Yay!!! Women power!

I can't thank you enough for your excellent step by step tutorial video. In these tough times where every cent counts, you have saved me hundreds of dollars and that's Australian dollars not US dollars. Once again thank you.

I replaced my regulator and my window is not working smoothly. After watching your video, I’m gonna go back and make sure that those rubber brackets are in the correct position and our snug. Thanks for the wonderful video!

excellent video, it helped me a lot, before I had ordered to fix my car window system I paid $600 and I think it was a waste of money because a few days ago it was the same now watching your video I have been able to solve it myself and don't spend more than $100 thank you very much for your video.

Any body that tries to debunk this guy doesn't know what they r talking about he specified black vs white assembly...is in depth and his knowledge is accurate and he even kept all OE hardware...love to see anyone talking smack duplicate his process....iam certified at that

Thanks again for the video, this will be the third time I've had to replace my window motor in the 10 years I've had the car, not sure if that's normal or a lemon. But the video is very clear and helps a lot.

Can’t think you enough for this tutorial. I had to rewatch it step by step numerous times but it’s in. Thanks for saving us much needed money by doing it ourselves

Awesome! Not to sure I could do it as fast as you in 18 minutes..LOL

lot of videos usually dont show the guy shoving parts into place but i love that this video does, huge part of doing a job is finding out how to fit shit into place properly lol, awesome vid man

Thank you for this excellent tutorial! My window broke on a bitterly cold day in November and I didn't want to bring it to a mechanic. This saved me a ton of money and was extremely easy to follow.

Thank you sir, this was a great help. This video definitely helped a lot. I'm very happy I was able to fix this myself with your help of course.

Worked like a charm. Thank you, sir

thank you very much i did it by my self your tutorial helped me, god bless and keep up the good work

Straight to the point and super heplful! Thank you dude!

Follow up to my post. On the 2013 Chevy Cruze, the release tab on the window connector was blue not red. Just pull out on it and then pull the connector apart. My blue tab came out of the connector, which wasn't a big deal. When I assembled it, I just slid it back in and it grabbed.

Thank you so much for this video. From what I can tell this tutorial applies to the Canadian market 2012 Chevrolet Orlando as well The door panel looks identical to me .. I will be using your guide for my install. Will confirm results and report back on it is the same process/parts for the Orlando

Amazing video, just what I needed to learn how to repair my window regulator

Thank you so much!! My sister and I were able to replace the regulators on the driver's and passenger's side windows. Could not have done it without your video.

thank you very much, just replaced mines.

I thank you. I was able to do this in my chevy cruze. Great step by step.

Honest work and very informative!

Thank you for the video, very helpful. Appreciate it !

Thanks for the video! It saved me $200! Cheers!

You made this job a DIY for me. thank you

This video saved me so much time thank you

Probably the most COMPLETE VIDEO on KZfaq!! Thank you!!! How much for the regulator??

Thank you. Saved me $1000

Thank you! Exactly what I needed to find

Thank you! Helped me out alot today

Wish I had seen your video first. I got ahead of myself and had to tear it apart again 😊

Thank You You Saved My Hundreds of Dollars

Thank you so much man!!

Perfect , saved a few bucks on holden Cruze

Great video. Made my life easier!

Explained well Thanks 👍👍👍

Very good training

Great video!!

How do you tell if the window has the auto function or not? Looking at ordering the regulator but I'm struggling to remember if it was auto or not. Very helpful video! Thanks!

So helpful

Damn fine work bubba

Awesome help thanks

Thank you!

Me gusto tu video aprendi como oner miventana

Thank you!!!!!

I just replaced my driver side regulators. Thanks for the video. Now i have a problem where the window is going up very very slowly. You can tell it is struggling. Im scard to use it. I dont want to get my window stuck in the down postion again. Do you know why it would be doing this? The motor worked at perfect sppeed before the regulator broke.

Awesome video. I have the broken one out and waiting on the new one to be delivered. I noticed at 14:35, you’re putting the bracket back on but right afterwards, when putting the panel back on, it’s not there. Is it ok to leave it off?

Thank you for this! What if the window is down and won't come back up? What could I do to get the window up before I start this process?

My window just popped out of the clip is it the same process to just put it back in

How you attached the glass wd motor 🤔

Is it necessary to keep the bracket?

I had to replace my regulator and hooked everything back up correctly but now for some reason the window motor just dosent work. Any advice on that?

Facts

Thanks

My mom's car motor blew out most likely and I have the part to replace it but I'm not sure if I got the automatic up and down one. What would happen if you put a regular one instead of the automatic?

My Cruze has dropped its driver window and when I pull button it clicks and doesn’t bring up the window. I haven’t pulled panel off yet but I’d say the motor regulator is broken, would I be correct?

I followed your video and besides getting the “open and close your window” error every once and a while, it was working fine. But after my battery was replaced, the window won’t move at all again. Do you know why this could happen?

Hi i have a 2015 chevy cruze also , i changed the regulator as well but now all of a sudden it not working do you know what might be the problem

I changed out mine tested it works up and down. But the issue is on my dash there’s a message reads open and close drivers window. I cleared it manually but its there after i turn off vehicle and turn it back on error message pops up again. How do you fix that. I dont have a machine to run tests

How do i get the glass up to change th motor

The regulator from our driver side was broken into pieces, just crazy, and we rarely use our 2015 Chevy Cruze and it is always inside a garage, so we went to the dealership and they gave us a quote for $800, and I said no and then this was one of the first videos I found, and right on, bought the part online and it is now installed and working like charm, one little detail that I still can’t go around, there is a message on screen that says “Open driver window, then Close driver window”, I did that and also try some calibration instructions that I’ve found where you open the window and wait 5 secs and then close the window and wait 5 secs but none of it works the message is still present. Anyone has any idea on how to fix that? Other than that everything works fine

Issue what about the tabs. How do I get the connections off. The bottom one is stuck

Is the process the same for a 2014 Cruz?

If my cable is frayed and messed up, is that the motor? Or just the regulator I need to replace

Hello. Help, my passenger window opens by itself. I replaced the switch, but it didn't help. Where could the problem be? Thanks

After I replaced my driver side window regulator I’m having an issue with my radio. When I turn my car off and open the door the radio stays on. This only started happening after I replaced the window regulator . Can you please give me some insight on what it can be

I am looking for the window regulator for my 2013 Chevrolet Cruze I am not able to find it in my city , anyone can help me out ?

Mines doesn’t go down just holds it up

Sadly my screw is stripped. Drat! My window won’t close.

Too dark

Literally the worst cars ever manufactured😂😂