@dj6eyes Жыл бұрын
The fact you were able to put it back together so quickly is insane
@sonyyoung1036 Жыл бұрын
Thanks for the info. I know you say you have to take the entire unit out to change motor because of those 2 spring loaded pins. But now you have to bleed the ABS module and to do that you need to activate the ABS motor. This requires proper scan tool that can do that. Both ways have different challenges or equipment.
@cahanfowler1136 Жыл бұрын
That was amazing. I'm never thought you would be able to get a tool in there.
@moby7656 Жыл бұрын
@Sony Young Take the 2 battery terminals off. Then remove the ABS pump... after removing the pump... put it back in the car after changing the motor.... connect back all brake lines and harness.....when all is completed power too..manually pump the brake to bleed the brake from the back caliper, on the opposite side from ABS module. all 4 calipers
@moby7656 Жыл бұрын
@Cahan Fowler I catch my a** trying to put it back in and that's the way I found how to put it back.
@johnjkizer6399 Жыл бұрын
Actually you can manually bleed the brake line, before doing this install simply disconnect the positive battery terminal and when complete reconnect the battery terminal and simply bleed brakes normally.
@osvaldoesquivel5633 Жыл бұрын
I live in a place where the climate is always hot, and the abs never gets used, I just unplug the abs when the lights come on and my car is running static due to abs. Unplug it 😊
@brandonnguyen8426 Жыл бұрын
Do you have the link to buy a used abs module? I’ve been looking but hard to find
@moby7656 5 ай бұрын
Ebay.com
@Abe-ny1dy Жыл бұрын
Buy the whole piece
Taryl Fixes All
Рет қаралды 92 М.
CarEdge
Рет қаралды 8 М.
AMMO NYC
Рет қаралды 117 М.
Hoovies Garage
Рет қаралды 53 М.
SK Decor & SK Coaching
Рет қаралды 50 М.
Rainman Ray's Repairs
Рет қаралды 123 М.