2015 Mercedes CLA45 AMG Ambient Lighting kit Installation

No video

2015 Mercedes CLA45 AMG Ambient Lighting kit Installation

Рет қаралды 16,680

Күн бұрын

Installed OEM style Qmbient Lighting kit on 2015 Mercedes CLA45 AMG. This car is same as CLA250 with slightly different trim and more performance engine.
Please dont forget to hit like, subscribe and hit ring button so you dont miss on our more cool videos.

Пікірлер: 32

@grzegorzgregorio7954 Жыл бұрын

the only video where someone explains where to push the wires from the door to inside the car 👍👍🤝🤝🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

@lightguysgta 11 ай бұрын

Thank you fro your comment and support. Please dont forget to subscribe.

@Naoto9991 Жыл бұрын

It's very easy to understand, and it's easy to see where to pay attention. thank you

@lightguysgta Жыл бұрын

Glad it was helpful!

@juancarlosnietonavas8520 Жыл бұрын

I seem to remember that this kit also comes with the ambient light trims for the rear doors. It would be nice if you had mentioned how to give power to the rear doors... since it is the most laborious to do, through the plug-in connectors of the rear doors. Anyway, nice video dude.

@lightguysgta 11 ай бұрын

The older version of this kit had RGB wire that runs to the front door through rocker panel and required to connect and sync witht he front door. The newer version of this kit has syncing controller just like C-Class ambient lights and all 4 doors lights sync with master controller on the front.

@Cablewinder 2 жыл бұрын

How did you connect the rear door lights? I can not connect a wire through the hole as on the front door. There is another connector and no space for additional wires

@nattawutprongsirikul3425 Жыл бұрын

Very helpful vids. Thanks

@mehmetkalkan9807 Жыл бұрын

How can i code in the ambient light menu to the system?

@lightguysgta Жыл бұрын

You require a code software to be uploaded to the existing system using OBD port.

@nachoidiareh1713 2 жыл бұрын

Nice I would like too do mine also

@boogiedownnow123 Жыл бұрын

Yo, I bought a turbine airvent kit from China, it states that it's plug and play, I already have an ambient kit done, would it be plugged in via the OEM via bypass on the door or the control box they put in on the other side of the door ?

@lightguysgta Жыл бұрын

Hi CJ, most rpobably you will need additional wirings for the airvents to source it to the power and color controller straight from Mercedes command. You can also use OBD port for this.

@boogiedownnow123 Жыл бұрын

@LightGuys_GTA Wrong, it runs through the same control box that's linked to the doors, only issue is timing the lights so they match the doors but takes like 2mins to do.

@theunambiguous Жыл бұрын

So all the power runs from that module in the passenger door?

@lightguysgta Жыл бұрын

Thats correct !!

@bjkas9000 2 жыл бұрын

Please.how did you connect to front fuse box?

@lightguysgta 2 жыл бұрын

A female wire connector from passenger door runs to the interior.

@bjkas9000 2 жыл бұрын

Hi.On the dash trim.which part did you grind.the inner or outside line plastic?cos mine is closed up too

@lightguysgta 2 жыл бұрын

@Bj kas hey its the outside line make sure you mask tape mark it before grinding.

@bjkas9000 2 жыл бұрын

Thanks

@Sarguran7736 2 жыл бұрын

could be mounted on a 2014 model (pre-restyling)?

@lightguysgta 2 жыл бұрын

This was 2014 Mercedes CLA43 AMG.

@BradyMelberg Жыл бұрын

@@lightguysgtais that ntg 4.5 multimedia version in stock ? ( smallest screen of all CLA)

@Sokolace Жыл бұрын

How do you change the colors for the ambient the PFL a-class the 4.5 ntg multimedia can't do that.

@TATTDIS 2 жыл бұрын

Ok so are you selling these or did you buy online if so why not provide a link?

@lightguysgta 2 жыл бұрын

These are custom-made. You can order them at our website www.lightguysgta.com

@jendrikwilden2924 2 жыл бұрын

Could you show the drivers side wiring?

@mihalutsk 2 жыл бұрын

Hello, I got similar kit for Mercedes A220. My main confusion is the OBD activation and installing that blackbox module. Will ambient light menu appear in the menu only after installation of the black-box module? I tried to activate Ambient Light using Chinese OBD activator, but didn't install module yet - after activation the new menu does not show up. It confuses me if the activator didn't work well, or I need to install the module first. Thanks!

@lightguysgta Жыл бұрын

You will need software update for this.

@juancarlosnietonavas8520 Жыл бұрын

I don't know what model of kit you will have, but you won't be able to control it at least through the menu on the screen. This video kit or similar, is only controlled through the steering wheel.

@lightguysgta 7 ай бұрын

You can buy this kit here on our website: www.lightguysgta.com/product/ambient-lighting-kit/1?cs=true&cst=custom