Рет қаралды 22,183
Replacement of the Mode door actuator in my 2015 Nissan Xterra. Some people call it a blend door. This is the mode door, it's on the left hand side of the dash, drivers side. Easily accessible just above and to the right of the gas pedal. Remove the wiring harness and three screws and out it comes. Pop the new one in and good to go.
Likely the same replacement procedure for all second gen Xterra's 2005-2015.. Maybe even first gen. Double the part number for other years.
My old actuator still functioned after removing which I found odd but led me to suspect the mode door itself had just jammed or got hung up on itself. Perhaps the actuator was on its way out so I opted to replace it anyways since I already had the old part out and the new part on hand
Part number:
- 27443-ZP00A or Dorman equivalent 604-627
Tool required:
- 5.5 mm or 7/32" wrench