2015 VW POLO BRAKE SHOES REPLACEMENT

Рет қаралды 33,843

3 жыл бұрын

How to Replace VW Polo rear brake shoes 2015
Track: Malik Bash - Apollo [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Malik Bash - Apollo | ...
Free Download / Stream: ncs.io/apollo

Пікірлер: 89

@frankmurphy4713 Ай бұрын

You explained this procedure very clear broke it down for novice like me with all them springs ! Top guy thanks Frank

@TEAMR4ULTV Ай бұрын

Thanks for watching really appreciate it

@MrCube17 3 ай бұрын

Thanks very much for this tutorial, made it simple to change the drum brakes with no experience. The spring setup would be so confusing without it. Much appreciated!!

@TEAMR4ULTV 3 ай бұрын

Thanks for watching really appreciate it

@nawaazjones-us9nr 10 ай бұрын

This man deserves a bell all the way from south africa

@peterbennett4809 Жыл бұрын

Thank you, thank you, thank you. I know how to do this now. Mind you, you made getting that first spring back on look very easy. I also struggled with the spring on the hand-brake cable. Thanks once again.

@TEAMR4ULTV Жыл бұрын

You are most welcome. Thanks for watching really appreciate

@ken111why 3 жыл бұрын

Great video with useful details! Thank you.

@panzeralienofficial 2 жыл бұрын

So easy to follow. Was about to call a mechanic . I am doing this myself now, no doubt. Thank you!

@panzeralienofficial 2 жыл бұрын

You are a very likable person btw. I really enjoyed watching this.

@TEAMR4ULTV 2 жыл бұрын

That's great trying my best hopefully you get the job done. Thanks for watching really appreciate it.

@panzeralienofficial 2 жыл бұрын

@@TEAMR4ULTV I did it, and it went well. Thank you! :)

@nkonzovilakazi3727 2 жыл бұрын

Simplified tutorial thank you very much.

@SW04ANY 2 жыл бұрын

Thank you bro 👍 helped me loads, today.

@anz3786 Жыл бұрын

I've just dun one side but thanks to u that u shown me the adjuster I didn't know what it was love yr vids

@TEAMR4ULTV Жыл бұрын

Thanks for watching really appreciate it

@martinblackbird543 Жыл бұрын

You're a legend Raul! keep the VAG vids coming my man! especially SEAT IBIZAS! Thankyou sir

@TEAMR4ULTV Жыл бұрын

Thanks for watching really appreciate it

@glyncooper1491 3 жыл бұрын

Nice vid helps me alot thanx

@mrericpritchard 2 жыл бұрын

Good video, thank you.

@zwivhuyaradzilani5283 2 жыл бұрын

Nice job man

@jonnyjuk 2 жыл бұрын

Great video thanks!

@TEAMR4ULTV 2 жыл бұрын

Thanks for watching, hope it helped you out

@mekkithamer1818 8 ай бұрын

very usefull thanks

@shokhanidris9906 2 жыл бұрын

Thank you 🙏

@evieemaya88 3 жыл бұрын

Great video just subscribed. As a viewer some friendly advice, if you put your repair videos into playlists by manufacturer aka vauxhall, ford etc it will help your viewers to just binge your video, wanted to watch the vauxhall ones but too much scrolling to find where they are👍🏼👍🏼👍🏼

@TEAMR4ULTV 3 жыл бұрын

Good idea will do that

@amarmatloob9624 2 жыл бұрын

Great video bro

@TEAMR4ULTV 2 жыл бұрын

Thanks for watching really appreciate it. Please like Share and subscribe.

@davidjohnmcgonigle2206 3 ай бұрын

Top video. Really well explained and helped so much. Keep up the brilliant content. 😊

@TEAMR4ULTV 3 ай бұрын

Thanks for watching really appreciate it

@TheQazi1947 2 жыл бұрын

Good video thanks

@TEAMR4ULTV 2 жыл бұрын

Thanks for watching really appreciate it.

@Chrisjones52111 Ай бұрын

Great video, helped me a lot, thank you.

@TEAMR4ULTV Ай бұрын

Thanks for watching really appreciate it

@Chrisjones52111 Ай бұрын

@@TEAMR4ULTV No, thank you🙂🙂

@lylemarvyn7880 Жыл бұрын

Thanks again

@kaywalker4433 Жыл бұрын

this will save me around 70 bucks ...cheers bud.

@yacam07 2 ай бұрын

thank's bro.

@TEAMR4ULTV Ай бұрын

Thanks for watching really appreciate it

@thooney2934 Жыл бұрын

Thanks for the video mate. I think I’m better off paying £40 do get them done instead

@powertech6816 11 ай бұрын

nice video thankyou , after installing a new cylinder why would the shoe on the right keep slipping off towards the backplate and landing on the rubber grommet of cylinder ? even though everything is in place , any ideas thanks

@TEAMR4ULTV 11 ай бұрын

On the cylinder there are little groves or cut outs to prevent that from happening just check if its facing the wrong way if so just spin it around

@arshadmahmood8050 3 жыл бұрын

Welldone

@thooney2934 Жыл бұрын

ThNks bruv

@TEAMR4ULTV Жыл бұрын

Your welcome

@andrismatvejevs8443 Ай бұрын

How tight should be wheel bearing?

@Howster69 Жыл бұрын

So how did you adjust it. I know you slid the adjuster up until slack. But do they auto adjust when you press the brake pedal?

@TEAMR4ULTV Жыл бұрын

No you have to adjust them on the hub first. On one side of the shoe if you pull it either way you will see the adjuster go up or down then just adjust it accordingly.

@AG-vk9gq 3 жыл бұрын

Great video but a couple of questions...do you need to replace the self locking hub nut with a new one ?...and is there a torque figure for tightening the nut? Thanks

@TEAMR4ULTV 3 жыл бұрын

You don't need to Replace the nut. As for tightening the nut there is a torque setting around about 150nm but to be honest just do it tight as you can with a braker bar/strong arm

@AG-vk9gq 3 жыл бұрын

@@TEAMR4ULTV ok thanks !

@jakubrydzynski2152 2 жыл бұрын

150nm???!!! buddy, not so hard. the instruction provides for tightening 70nm and 40 degrees. of course you have to put on a new nut or give thread glue.

@thooney2934 Жыл бұрын

Mate stop giving out bad information.. axle nut should never be tightened to 70nm.. unless you want the whole thing to come off some day.. and yes you can use tue same nut as long as you tap a notch back in .

@jansoltisik8208 Жыл бұрын

@@thooney2934 Sorry to disappoint you, this information is correct, torque 70Nm+40ﾟangular, it's generally recommended to renew all the self-locking nyloc style nuts, as there is no groove in the stub, nowhere to tap a notch. Simples.

@spencergallacher3074 2 жыл бұрын

Hi what did you torque the hub nut too

@TEAMR4ULTV 2 жыл бұрын

If you want the exact torque setting just check autodata. I just used a breaker bar/strong Arm and did it tight as posible.

@Protechvfs 9 ай бұрын

My understanding is if you put the drum back on and press the foot brake the adjuster should drop and adjust that way ?

@TEAMR4ULTV 9 ай бұрын

Thanks for watching really appreciate it. To be honest I never done it that way. Might work

@zaheersarwar7815 9 ай бұрын

@TEAMR4ULTV Yes, if you look at how the adjuster is designed to work. It's self adjusting as the wheel cylinders operate and brake wear takes place. The adjuster will drop with the tension applied from the spring and adjust the shoes. But the video was great. I would definitely recommend a dedust next time of the back plate and grease the high spots where the shoes contact that back plate . Other then that a good job done..

@Ashleywv3 21 күн бұрын

Great video. Been looking to do them myself since my local mechanic quoted me £240 for drums snd shoes on both sides. Not sure im confident to do it myself, is £240 a good quote?

@TEAMR4ULTV 20 күн бұрын

That's okay price. Thanks for watching really appreciate it

@Ashleywv3 18 күн бұрын

@@TEAMR4ULTV Thanks for the response! Keep up the great content

@imrxnz2531 Жыл бұрын

Is the spring kit included with the new brake shoes pack? Or do do you have to buy them separately ?

@TEAMR4ULTV Жыл бұрын

I had to buy them separately. Thanks for watching really appreciate it.

@imrxnz2531 Жыл бұрын

@@TEAMR4ULTV I ordered a full set of brake shoes with springs included and I will try to replace it myself. Doesn't look very hard from the video. Thanks for showing us every single step 👍

@imrxnz2531 Жыл бұрын

@@TEAMR4ULTV Just a question. I only have the small jack that is included with the car's tool kit. Is it going to be enough to secure the car for as long as it takes to replace the shoes? Or should i buy a hydraulic jack instead?

@TEAMR4ULTV Жыл бұрын

@@imrxnz2531 thanks for watching really appreciate it. To be honest them small Jack's are not that safe there ok for the odd tyre replacment on and off, but for you to Replace brake shoes not safe.

@imrxnz2531 Жыл бұрын

@@TEAMR4ULTV thanks bro. Could you please check the video I uploaded on my channel please? My cars started making a noise when i turn the steering wheel. Do you have any idea what could it be?

@seemaab 2 жыл бұрын

Wow great video! Question, do we need to mess with the adjuster? In the video you knock it down to tighten and knock it up to slacken. Doesn’t it auto adjust after applying the brakes?

@TEAMR4ULTV 2 жыл бұрын

Thanks for watching. It doesn't auto Adjust unfortunately so you do need to mess with it eventually.

@seemaab 2 жыл бұрын

R4UL TV thanks so much for explaining. You mentioned that the lever should move freely on the new shoes but I received my new Apex branded shoes and one side moves freely but the other side is slightly stiffer to move. Can I grease the lever bolt with something? If so what do you recommend, wd40 or a thicker grease? Thanks again!

@TEAMR4ULTV 2 жыл бұрын

@@seemaab I wouldn't use grease or anything just pull the lever up for example if you have the shoe on your hand just try bending the lever towards you just a mil its should go free

@TEAMR4ULTV 2 жыл бұрын

Am sorry but its very hard to explain via message

@seemaab 2 жыл бұрын

R4UL TV The new lever on the brake shoe doesn’t get smoother, it has a jerky motion when I pull or push it. The new lever for the other side moves very smoothly. It’s as if the bolt is pressed too hard or doesn’t have enough grease from the manufacturer internally.

@ibuk4309 Жыл бұрын

Easier way to get drum off is pop up the handbrake adjuster wedge with a screwdriver through one of the bolt holes .

@TEAMR4ULTV Жыл бұрын

Thanks for watching really appreciate it. Thanks for the advice I'll try it next time

@stihl3826 Жыл бұрын

Could you not have cleaned the backplate with brake cleaner?

@emdadyy 10 ай бұрын

Good video but honestly guys, take it to a garage. Not quick or easy to DIY. If you do try DIY, dont forget to grease contact points or brakes will squeek when driving. Also to fit the new springs, it's easier to pull using the old springs instead of a flat head screwdriver

@TEAMR4ULTV 10 ай бұрын

Thanks for watching really appreciate it