2016 - 2024 Toyota Tacoma Front Door Speaker / Tweeter Install

Рет қаралды 12,289

9 ай бұрын

Parts linked in the description below!
Watch a full tutorial as a 2023 Toyota Tacoma will have a new pair of Alpine component speakers installed in the front doors. We will be using the Alpine Type S 6x9" components that incudes a mid-bass driver for the front door and tweeter for the dash.
Note: This vehicle wasn't equipped with JBL from the factory - If you have JBL, the OEM speaker are 2 ohm, so if retaining the factory amp, you will need a 2 ohm aftermarket speaker to replace it with. If you install a 4 ohm speaker with the JBL amplifier, it was be less sensitive and thus appear quieter. Recommended speakers for JBL replacements also linked below.
This video applies to Toyota Tacoma models for years 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and 2024. This video also includes door panel removal, wiring, and installation.
Click here to see the rear speaker install on a Tacoma:
• 2016 - 2024 Toyota Tac...
Click here to see the 5 channel amp and sub install on this Tacoma
• 2016 - 2024 Toyota Tac...
Click here to see a small 8" powered sub install on this Tacoma:
• 2016 - 2024 Toyota Tac...
If you have any questions, leave a comment below! Be sure to like and subscribe!
Speaker Installation Parts Used (Amazon Associate Paid Links):
*Alpine Type S 6x9" Component Speakers: amzn.to/3kPlosO
--If simply doing a 6x9" coaxial in the door only here is a great recommendation: amzn.to/3mMNsyd
*Metra 82-8146 6x9" speaker bracket adapter: amzn.to/3hiOQnN
--If doing a 6.5", use the Metra 82-8147 Speaker Bracket Adapters (6x9 to 6.5"): amzn.to/3h9boYa
*Metra 72-8104 Speaker Wiring Harness (Pair): amzn.to/3xQDgqB
*Metra 72-8110 Tweeter Wiring Harness (Pair): amzn.to/3RrJ1YR
*Metra 82-4201 Tweeter Bracket Adapter: amzn.to/3m3tCwD
There are other sizes available (hole cutout includes flush mount cup diameter):
--Toyota Tweeter Bracket Adapter 1.25": amzn.to/3F7vT59
--Toyota Tweeter Bracket Adapter 1.5": amzn.to/2V9RS6w
--Toyota Tweeter Bracket Adapter 1.75": amzn.to/3D6LZKD
--Toyota Tweeter Bracket Adapter 2": amzn.to/3gX571u
**If you have JBL here are the recommended low ohm / impedance speaker replacements:
*Infinity Primus 6x9" 3 ohm component speakers: amzn.to/3EQmCwO
Disclosure: As an Amazon Associate I earn from qualifying purchases

Пікірлер: 15

@ProvoBeastAudio 9 ай бұрын

Parts used and recommended linked in the description of the video!

@tommywebb1617 9 ай бұрын

Thank you for this video, i just bought the same speakers and I had a problem installing the tweeters, but this video cleared it up, thanks so much!!!!

@hucarr5703 3 ай бұрын

One Question WHENE do you have to upgrade the speakers Wire ??? Thank you very much !!!

@albono780 9 ай бұрын

Nice video. I just have a question. Why don’t you add sound deadener and seal foam from speaker to bracket and bracket to door . Just curious if this is something you do off camera

@RobertoPerez-nu5xo Ай бұрын

Great video! But I do have a question. I am about to do a complete sound upgrade on my 2023 Tacoma TRD Sport non-JBL. The positive and negative wire switch on the tweeter, that you mentioned, is it on all Tacomas? I have not seen anyone else say this on anyother KZfaq video.

@samalander 2 ай бұрын

FYI, the adapters listed in the description are incompatible with 2024 Tacoma. I believe the speaker wire harness should be Metra 72-8109. I'm unsure which mounting plate is needed, but the holes do not line up using the Metra 82-8146 plate. However, you can use these plates by drilling your own holes on one of the ends.

@frankb9175 Ай бұрын

That positive and negative switch you made on tweeter does that apply to door panel ? I have metra harness and my door speakers only play bass then vocals maybe because of that? But when I purchased through crutchfield that wasnt mentioned in instructions

@danielmcnelis389 6 ай бұрын

How did you get the retainer clips on like that?

@sef8184 8 ай бұрын

are the Gen5 4runners tweeters positive/negative backwards like the tacomas?

@damon323 Ай бұрын

Exactly what I was wondering...you ever find out?

@damon323 Ай бұрын

Why would Toyota wire any speakers out of phase, especially on a component front stage. I don't know if you are saying Toyota got it wrong, or Metra. Either way, I don't know how either of them did.

@bobfenger2411 2 ай бұрын

Do you have a video or recommendation on how to remove the 2024 Tacoma front door panel?

@samalander 2 ай бұрын

There is little to no guidance online for this, but I managed to remove my front door panels yesterday. You can follow this video to get a general idea around the door handle and perimeter clips. Other than the screw behind the door handle, there are two more screws. One is under the panel for the window control module. The other is under the vanity plate on the side of the door panel that says "Tacoma" or "TRD", depending on your trim. Mine is a silver color and says "TRD". The trick is to gently pry from the side with the little indentation and and slide the panel away from where you're prying. The panel slides out to the side and can be easily removed to expose the last screw. From there, you can remove the door panel, door latch cables, and you're home free.

@samalander 2 ай бұрын

Also important to note, the adapters listed in the description are incompatible with 2024 Tacoma. I believe the speaker wire harness should be Metra 72-8109. I'm unsure which mounting plate is needed, but the holes do not line up using the Metra 82-8146 plate. However, you can use these plates by drilling your own holes on one of the ends.