2016 Audi Q5 Front Brake pads & Rotors

No video

2016 Audi Q5 Front Brake pads & Rotors

Рет қаралды 20,564

Күн бұрын

amzn.to/2L6obdd - Sil-Glyde Brake grease
amzn.to/3FEVcJm - GEARWRENCH 3/8" Drive Micrometer Torque Wrench 10-100 ft/lbs. - 85062
amzn.to/3AyXq9B - Mission Automotive Brake Caliper Hooks/Brake Caliper Hangers (Set of 2)
amzn.to/3sKJB6U - Milwaukee 2767-20 M18 FUEL High Torque 1/2" Impact Wrench with Friction Ring
amzn.to/3ndQwlK - Genuine OEM Front Disc Brake Pad Set for Audi 8R0698151L
amzn.to/3QLS2JB - Genuine OEM Front Disc Brake Rotor for Audi 4G0615301AE
amzn.to/3ngrbYx - TRW Pro TRH1663 Disc Brake Pad Set For Audi Q5 2013-2017, Front
amzn.to/3xQ1PFR - Dynamic Friction Company Front GEOMET Brake Rotors with 5000 Advanced Brake Pads 9502-73054
amzn.to/3ODLVoy - X AUTOHAUX 8R0615121 Front Left Brake Pad Electronic Wear Sensor Brake Pad Wear Indicators for Audi Q5 2013-2017
amzn.to/3DBkAOx - Rotor Remover 9000 (a.k.a. Small sledgehammer)
Just a quick video showing how to replace the front brake pads and Rotors on a 2016 Audi Q5 2.0t Premium. I said Quattro in the video because this is awd, but not sure if it's really called 'Quattro'.
These pads were completely worn down, but as you can see in the video, the rotors were completely glazed over and not stopping very well. The wear indicator didn't trigger the dash light warning to come on, but the owner was hearing brake noise.
Tools Needed:
Large Screwdrivers or a disc pad spreader
small screwdriver or prying pick
21mm Socket and Breaker Bar or impact wrench to remove the caliper bracket bolts
T-30 Torx bit or driver for the rotor screw
Torque Wrench
Brake Grease
Brake Cleaner
Wire Brush
Torque spec for the Larger Caliper bracket bolts is 144 ft. lbs. (196 NM)
Here's a video I made of replacing the rear brake pads on this same vehicle:
• 2016 Audi Q5 Rear Brak...
Thanks for Watching!
Please Subscribe!
-Dan the Fix it Man
www.amazon.com/shop/danthefixitman
Song used in the video:
'Arm Candy' by Spence
As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 22

@MrJimmyJames23 5 ай бұрын

The “Tanya Harding” Got me in tears 😭😭😭

@elmayimbe_the_amateur_mechanic 5 ай бұрын

Brrrrrooooooooo!!!!! 😂😂😂

@MrMessina-lh9gr Жыл бұрын

Great in depth video!

@ismaelrodriguez1337 9 ай бұрын

Clean job

@xinbox2 Жыл бұрын

Very nicely done! Thank you 😂

@jimsego172 Жыл бұрын

Thanks for the great video. I am getting my Macan ready for inspection and took a look today. I'm going to need help with the 21 mm bolts. Did you use the jackstand to level up the control arm to make it easier to get the impact gun in place?

@rupertanthony1139 4 ай бұрын

You help me so much. Thank you. Plus, you safe me a few hundred dollars. Keep up the good work

@DantheFixitMan 4 ай бұрын

Thank you so much! So happy to hear you saved some money! Take care, -Dan

@Jaiwilldo 22 күн бұрын

Rotor size 320mm or 345mm?

@jekutube9 11 ай бұрын

my front caliper pins are always frozen stiff (can't knock them out! corroded) - and have to take a reciprocating saw to get them off

@elmayimbe_the_amateur_mechanic 5 ай бұрын

You don't have to push the pistons back with a c clamp?

@ADProduces Жыл бұрын

Great vid. Is it the same for the passenger side? Is it the same for the different trims Q5 3.0 and SQ5?

@Omnibeamer Жыл бұрын

Yes it same on passenger side and same for different rims

@lukes6335 7 ай бұрын

I did this and now have a electronic parking brake malfunction light, do you have a solution for this?

@Arty-ev8oy Жыл бұрын

Do you have a video with the same make and model car for the rear brakes?

@DantheFixitMan Жыл бұрын

kzfaq.info/get/bejne/iLV0bJde2szLYqM.html This is for the rear brake pads on the same car.

@Kushj23 2 жыл бұрын

Hey it’s my first time doing my pads and rotors but it seems that the two 21 mm bolt for the calliper won’t budge. I’ve been stuck on them for 2 hours. Any tips on how to remove it?

@babyballa991 Жыл бұрын

Bigger impact and maybe use a heat induction tool to get ghe bolt warm to give u rhe best chance

@keijokortti5229 Жыл бұрын

More power

@BMH1965 7 ай бұрын

I dare you to show you fixing the rears properly...

@DantheFixitMan 7 ай бұрын

This is what I did, may not be the proper way, because it’s the pads only, and I didn’t have the scan tool for retracting the parking brake the proper way, but it might help? kzfaq.info/get/bejne/iLV0bJde2szLYqM.htmlsi=gGAtChUxDnC2ebST