2016+Camaro ZL1/SS Header install Designed by CSP @completestreetperformance manufactured by Kooks.

Рет қаралды 2,934

8 ай бұрын

Hey everyone and welcome back to another Install video on Gunmetal ZL1 1LE. This is a pretty indepth video on how to prep and install a set of 2" Headers on your 6th generation Camaro SS, ZL1/1LE. I point out a few key things that are very important on this Install like some tech tips from Eric over ‎@floridahighperformance and review how well the design is on these headers designed by Andrew and his team ‎@completestreetperformance or CSP.
Please Like 👍🏻, Hit the 🔔 and Subscribe to help out the channel.
If you'd like to follow Gunmetal ZL1 1LE on my other channels; see the links below:
tiktok.com/@derrickstephenson2
derrickstephens...
Music in the video was written and performed by:
Music: Scary Horror Trailer
Musician: AlexGrohl
URL: pixabay.com/music/scary-horro...
Music: Replicants
Musician: Hampshire Naeselius
URL: www.epidemicsound.com
Music: Cloudhunting
Musician: Sven Lindvall
URL: www.epidemicsound.com

Пікірлер: 20

@theboo4u 8 ай бұрын

I also recommend putting heat tape on the starter shield, great video, brought back some memories lol

@completestreetperformance 8 ай бұрын

Thanks for the video! One suggestion, I'd change the video title to "2016+ Camaro ZL1/1LE 2" CSP Headers Install manufacturer by Kooks" that way people don't think they are just rebranded Kooks headers lol

@completestreetperformance 8 ай бұрын

BTW - appreciate all the kind words. -Andrew

@HotRodsAndHouses 8 ай бұрын

You got it!

@JAY-D33 8 ай бұрын

Think you need to make a video on how high you got the zl1 up high with the jacks…and blocks

@davidedwards89 Ай бұрын

GREAT VIDEO BEST I HAVE SEEN.I JUST PURCHASED THE LG MOTORSPORTS 1 7/8 LONG TUBE WITH HIGH FLOW CATS AND XPIPES AS WELL AS THE CORSA EXTREME NPP AXLE BACK EXHAUST.WERE YOU ABLE TO DRIVE IT TO LMR TO HAVE THE TUNE DONE?

@HotRodsAndHouses 8 күн бұрын

Yes just drive it easy

@Laidoffsick 8 ай бұрын

I was all set to order the Kooks until I saw this video. Im diggin the CSP design. I just havent decided catless or cats.

@HotRodsAndHouses 8 ай бұрын

These headers rock brother either way you go.

@completestreetperformance 8 ай бұрын

The Ultra Catted connections are the most capable on the market. Delivering well over 1000 rwhp with ease thanks to being the only one using the 4.5" housing!

@Laidoffsick 8 ай бұрын

@@completestreetperformance my catless connection pipes arrived today. The headers are still at Jet Hot. If I need to later down the road, I'll swap out the connection pipes for the Ultra Cats 😉

@colbygraves9298 8 ай бұрын

Great video! But I think after seeing this video I’m going to take it to a shop 😅 Not much room to work!

@HotRodsAndHouses 8 ай бұрын

Trust me man, that was the only thing I was severely worried about. It was not as bad as some people make it out. If you build the blocks high enough you'll be good. Best of luck or reach out for any questions 🤜🤛

@swisstyphoon1 4 ай бұрын

Thanks for the video. 👍 About to order the same ones. How is the clearance to the steering shaft, and the front axle brace?

@completestreetperformance 4 ай бұрын

We're a tad biased but we designed them to clear everything and even utilize factory plug wires if you so choose to!

@HotRodsAndHouses 3 ай бұрын

Just as CSP said man no clearance issues anywhere whatsoever. The reason I wanted to make the video is because not everyone knows about these and should since it checks every box....especially for the 2" not 17/8".

@albertoj5308 3 ай бұрын

What tune did you use? Did you get it tuned right after the install?

@HotRodsAndHouses 3 ай бұрын

I had the car tuned through LMR (Late Model Racecraft) after the install. I didn't want to take any chances it running lean with things outta wack. The engine light didn't come on till about halfway to LMR. Amazing difference though.